aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--MAINTAINERS11
-rw-r--r--drivers/i2c/busses/i2c-designware-core.h1
-rw-r--r--drivers/i2c/busses/i2c-designware-slave.c4
-rw-r--r--drivers/i2c/busses/i2c-img-scb.c2
-rw-r--r--drivers/i2c/busses/i2c-mchp-pci1xxxx.c6
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c11
-rw-r--r--drivers/i2c/busses/i2c-sprd.c8
-rw-r--r--drivers/misc/eeprom/Kconfig1
8 files changed, 37 insertions, 7 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 3d2d5fb24274..f794002a192e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9696,8 +9696,9 @@ F: include/uapi/linux/i2c-*.h
F: include/uapi/linux/i2c.h
I2C SUBSYSTEM HOST DRIVERS
+M: Andi Shyti <andi.shyti@kernel.org>
L: linux-i2c@vger.kernel.org
-S: Odd Fixes
+S: Maintained
W: https://i2c.wiki.kernel.org/
Q: https://patchwork.ozlabs.org/project/linux-i2c/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
@@ -18047,6 +18048,14 @@ S: Maintained
F: Documentation/devicetree/bindings/usb/renesas,rzn1-usbf.yaml
F: drivers/usb/gadget/udc/renesas_usbf.c
+RENESAS RZ/V2M I2C DRIVER
+M: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+L: linux-i2c@vger.kernel.org
+L: linux-renesas-soc@vger.kernel.org
+S: Supported
+F: Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
+F: drivers/i2c/busses/i2c-rzv2m.c
+
RENESAS USB PHY DRIVER
M: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
L: linux-renesas-soc@vger.kernel.org
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index c5d87aae39c6..bf23bfb51aea 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -40,6 +40,7 @@
#define DW_IC_CON_BUS_CLEAR_CTRL BIT(11)
#define DW_IC_DATA_CMD_DAT GENMASK(7, 0)
+#define DW_IC_DATA_CMD_FIRST_DATA_BYTE BIT(11)
/*
* Registers offset
diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
index cec25054bb24..2e079cf20bb5 100644
--- a/drivers/i2c/busses/i2c-designware-slave.c
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -176,6 +176,10 @@ static irqreturn_t i2c_dw_isr_slave(int this_irq, void *dev_id)
do {
regmap_read(dev->map, DW_IC_DATA_CMD, &tmp);
+ if (tmp & DW_IC_DATA_CMD_FIRST_DATA_BYTE)
+ i2c_slave_event(dev->slave,
+ I2C_SLAVE_WRITE_REQUESTED,
+ &val);
val = tmp;
i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_RECEIVED,
&val);
diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c
index 8e987945ed45..39c479f96eb5 100644
--- a/drivers/i2c/busses/i2c-img-scb.c
+++ b/drivers/i2c/busses/i2c-img-scb.c
@@ -257,7 +257,7 @@
#define IMG_I2C_TIMEOUT (msecs_to_jiffies(1000))
/*
- * Worst incs are 1 (innacurate) and 16*256 (irregular).
+ * Worst incs are 1 (inaccurate) and 16*256 (irregular).
* So a sensible inc is the logarithmic mean: 64 (2^6), which is
* in the middle of the valid range (0-127).
*/
diff --git a/drivers/i2c/busses/i2c-mchp-pci1xxxx.c b/drivers/i2c/busses/i2c-mchp-pci1xxxx.c
index b21ffd6df927..5ef136c3ecb1 100644
--- a/drivers/i2c/busses/i2c-mchp-pci1xxxx.c
+++ b/drivers/i2c/busses/i2c-mchp-pci1xxxx.c
@@ -1118,8 +1118,10 @@ static int pci1xxxx_i2c_resume(struct device *dev)
static DEFINE_SIMPLE_DEV_PM_OPS(pci1xxxx_i2c_pm_ops, pci1xxxx_i2c_suspend,
pci1xxxx_i2c_resume);
-static void pci1xxxx_i2c_shutdown(struct pci1xxxx_i2c *i2c)
+static void pci1xxxx_i2c_shutdown(void *data)
{
+ struct pci1xxxx_i2c *i2c = data;
+
pci1xxxx_i2c_config_padctrl(i2c, false);
pci1xxxx_i2c_configure_core_reg(i2c, false);
}
@@ -1156,7 +1158,7 @@ static int pci1xxxx_i2c_probe_pci(struct pci_dev *pdev,
init_completion(&i2c->i2c_xfer_done);
pci1xxxx_i2c_init(i2c);
- ret = devm_add_action(dev, (void (*)(void *))pci1xxxx_i2c_shutdown, i2c);
+ ret = devm_add_action(dev, pci1xxxx_i2c_shutdown, i2c);
if (ret)
return ret;
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 047dfef7a657..878c076ebdc6 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -520,6 +520,17 @@ mv64xxx_i2c_intr(int irq, void *dev_id)
while (readl(drv_data->reg_base + drv_data->reg_offsets.control) &
MV64XXX_I2C_REG_CONTROL_IFLG) {
+ /*
+ * It seems that sometime the controller updates the status
+ * register only after it asserts IFLG in control register.
+ * This may result in weird bugs when in atomic mode. A delay
+ * of 100 ns before reading the status register solves this
+ * issue. This bug does not seem to appear when using
+ * interrupts.
+ */
+ if (drv_data->atomic)
+ ndelay(100);
+
status = readl(drv_data->reg_base + drv_data->reg_offsets.status);
mv64xxx_i2c_fsm(drv_data, status);
mv64xxx_i2c_do_action(drv_data);
diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c
index 4fe15cd78907..ffc54fbf814d 100644
--- a/drivers/i2c/busses/i2c-sprd.c
+++ b/drivers/i2c/busses/i2c-sprd.c
@@ -576,12 +576,14 @@ static int sprd_i2c_remove(struct platform_device *pdev)
struct sprd_i2c *i2c_dev = platform_get_drvdata(pdev);
int ret;
- ret = pm_runtime_resume_and_get(i2c_dev->dev);
+ ret = pm_runtime_get_sync(i2c_dev->dev);
if (ret < 0)
- return ret;
+ dev_err(&pdev->dev, "Failed to resume device (%pe)\n", ERR_PTR(ret));
i2c_del_adapter(&i2c_dev->adap);
- clk_disable_unprepare(i2c_dev->clk);
+
+ if (ret >= 0)
+ clk_disable_unprepare(i2c_dev->clk);
pm_runtime_put_noidle(i2c_dev->dev);
pm_runtime_disable(i2c_dev->dev);
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index f0a7531f354c..2d240bfa819f 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -6,6 +6,7 @@ config EEPROM_AT24
depends on I2C && SYSFS
select NVMEM
select NVMEM_SYSFS
+ select REGMAP
select REGMAP_I2C
help
Enable this driver to get read/write support to most I2C EEPROMs
Powered by cgit, Gruvboxed by Blaster4385.