diff options
| -rw-r--r-- | drivers/spi/spi-dw-dma.c | 28 |
1 files changed, 13 insertions, 15 deletions
diff --git a/drivers/spi/spi-dw-dma.c b/drivers/spi/spi-dw-dma.c index bb390ff67d1d..a7ff1e357f8b 100644 --- a/drivers/spi/spi-dw-dma.c +++ b/drivers/spi/spi-dw-dma.c @@ -49,6 +49,7 @@ static void dw_spi_dma_maxburst_init(struct dw_spi *dws) max_burst = RX_BURST_LEVEL; dws->rxburst = min(max_burst, def_burst); + dw_writel(dws, DW_SPI_DMARDLR, dws->rxburst - 1); ret = dma_get_slave_caps(dws->txchan, &caps); if (!ret && caps.max_burst) @@ -56,7 +57,19 @@ static void dw_spi_dma_maxburst_init(struct dw_spi *dws) else max_burst = TX_BURST_LEVEL; + /* + * Having a Rx DMA channel serviced with higher priority than a Tx DMA + * channel might not be enough to provide a well balanced DMA-based + * SPI transfer interface. There might still be moments when the Tx DMA + * channel is occasionally handled faster than the Rx DMA channel. + * That in its turn will eventually cause the SPI Rx FIFO overflow if + * SPI bus speed is high enough to fill the SPI Rx FIFO in before it's + * cleared by the Rx DMA channel. In order to fix the problem the Tx + * DMA activity is intentionally slowed down by limiting the SPI Tx + * FIFO depth with a value twice bigger than the Tx burst length. + */ dws->txburst = min(max_burst, def_burst); + dw_writel(dws, DW_SPI_DMATDLR, dws->txburst); } static int dw_spi_dma_init_mfld(struct device *dev, struct dw_spi *dws) @@ -372,21 +385,6 @@ static int dw_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer) { u16 imr = 0, dma_ctrl = 0; - /* - * Having a Rx DMA channel serviced with higher priority than a Tx DMA - * channel might not be enough to provide a well balanced DMA-based - * SPI transfer interface. There might still be moments when the Tx DMA - * channel is occasionally handled faster than the Rx DMA channel. - * That in its turn will eventually cause the SPI Rx FIFO overflow if - * SPI bus speed is high enough to fill the SPI Rx FIFO in before it's - * cleared by the Rx DMA channel. In order to fix the problem the Tx - * DMA activity is intentionally slowed down by limiting the SPI Tx - * FIFO depth with a value twice bigger than the Tx burst length - * calculated earlier by the dw_spi_dma_maxburst_init() method. - */ - dw_writel(dws, DW_SPI_DMARDLR, dws->rxburst - 1); - dw_writel(dws, DW_SPI_DMATDLR, dws->txburst); - if (xfer->tx_buf) dma_ctrl |= SPI_DMA_TDMAE; if (xfer->rx_buf) |