Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Alexei Starovoitov says:

====================
pull-request: bpf-next 2023-12-18

This PR is larger than usual and contains changes in various parts
of the kernel.

The main changes are:

1) Fix kCFI bugs in BPF, from Peter Zijlstra.

End result: all forms of indirect calls from BPF into kernel
and from kernel into BPF work with CFI enabled. This allows BPF
to work with CONFIG_FINEIBT=y.

2) Introduce BPF token object, from Andrii Nakryiko.

It adds an ability to delegate a subset of BPF features from privileged
daemon (e.g., systemd) through special mount options for userns-bound
BPF FS to a trusted unprivileged application. The design accommodates
suggestions from Christian Brauner and Paul Moore.

Example:
$ sudo mkdir -p /sys/fs/bpf/token
$ sudo mount -t bpf bpffs /sys/fs/bpf/token \
             -o delegate_cmds=prog_load:MAP_CREATE \
             -o delegate_progs=kprobe \
             -o delegate_attachs=xdp

3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei.

 - Complete precision tracking support for register spills
 - Fix verification of possibly-zero-sized stack accesses
 - Fix access to uninit stack slots
 - Track aligned STACK_ZERO cases as imprecise spilled registers.
   It improves the verifier "instructions processed" metric from single
   digit to 50-60% for some programs.
 - Fix verifier retval logic

4) Support for VLAN tag in XDP hints, from Larysa Zaremba.

5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu.

End result: better memory utilization and lower I$ miss for calls to BPF
via BPF trampoline.

6) Fix race between BPF prog accessing inner map and parallel delete,
from Hou Tao.

7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu.

It allows BPF interact with IPSEC infra. The intent is to support
software RSS (via XDP) for the upcoming ipsec pcpu work.
Experiments on AWS demonstrate single tunnel pcpu ipsec reaching
line rate on 100G ENA nics.

8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao.

9) BPF file verification via fsverity, from Song Liu.

It allows BPF progs get fsverity digest.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits)
  bpf: Ensure precise is reset to false in __mark_reg_const_zero()
  selftests/bpf: Add more uprobe multi fail tests
  bpf: Fail uprobe multi link with negative offset
  selftests/bpf: Test the release of map btf
  s390/bpf: Fix indirect trampoline generation
  selftests/bpf: Temporarily disable dummy_struct_ops test on s390
  x86/cfi,bpf: Fix bpf_exception_cb() signature
  bpf: Fix dtor CFI
  cfi: Add CFI_NOSEAL()
  x86/cfi,bpf: Fix bpf_struct_ops CFI
  x86/cfi,bpf: Fix bpf_callback_t CFI
  x86/cfi,bpf: Fix BPF JIT call
  cfi: Flip headers
  selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment
  selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test
  selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment
  bpf: Limit the number of kprobes when attaching program to multiple kprobes
  bpf: Limit the number of uprobes when attaching program to multiple uprobes
  bpf: xdp: Register generic_kfunc_set with XDP programs
  selftests/bpf: utilize string values for delegate_xxx mount options
  ...
====================

Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 0 insertions, 92 deletions

diff --git a/tools/testing/selftests/bpf/test_tunnel.sh b/tools/testing/selftests/bpf/test_tunnel.sh
index 2dec7dbf29a2..d9661b9988ba 100755
--- a/tools/testing/selftests/bpf/test_tunnel.sh
+++ b/tools/testing/selftests/bpf/test_tunnel.sh
@@ -517,90 +517,6 @@ test_ip6ip6()
         echo -e ${GREEN}"PASS: ip6$TYPE"${NC}
 }
 
-setup_xfrm_tunnel()
-{
-	auth=0x$(printf '1%.0s' {1..40})
-	enc=0x$(printf '2%.0s' {1..32})
-	spi_in_to_out=0x1
-	spi_out_to_in=0x2
-	# at_ns0 namespace
-	# at_ns0 -> root
-	ip netns exec at_ns0 \
-		ip xfrm state add src 172.16.1.100 dst 172.16.1.200 proto esp \
-			spi $spi_in_to_out reqid 1 mode tunnel \
-			auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc
-	ip netns exec at_ns0 \
-		ip xfrm policy add src 10.1.1.100/32 dst 10.1.1.200/32 dir out \
-		tmpl src 172.16.1.100 dst 172.16.1.200 proto esp reqid 1 \
-		mode tunnel
-	# root -> at_ns0
-	ip netns exec at_ns0 \
-		ip xfrm state add src 172.16.1.200 dst 172.16.1.100 proto esp \
-			spi $spi_out_to_in reqid 2 mode tunnel \
-			auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc
-	ip netns exec at_ns0 \
-		ip xfrm policy add src 10.1.1.200/32 dst 10.1.1.100/32 dir in \
-		tmpl src 172.16.1.200 dst 172.16.1.100 proto esp reqid 2 \
-		mode tunnel
-	# address & route
-	ip netns exec at_ns0 \
-		ip addr add dev veth0 10.1.1.100/32
-	ip netns exec at_ns0 \
-		ip route add 10.1.1.200 dev veth0 via 172.16.1.200 \
-			src 10.1.1.100
-
-	# root namespace
-	# at_ns0 -> root
-	ip xfrm state add src 172.16.1.100 dst 172.16.1.200 proto esp \
-		spi $spi_in_to_out reqid 1 mode tunnel \
-		auth-trunc 'hmac(sha1)' $auth 96  enc 'cbc(aes)' $enc
-	ip xfrm policy add src 10.1.1.100/32 dst 10.1.1.200/32 dir in \
-		tmpl src 172.16.1.100 dst 172.16.1.200 proto esp reqid 1 \
-		mode tunnel
-	# root -> at_ns0
-	ip xfrm state add src 172.16.1.200 dst 172.16.1.100 proto esp \
-		spi $spi_out_to_in reqid 2 mode tunnel \
-		auth-trunc 'hmac(sha1)' $auth 96  enc 'cbc(aes)' $enc
-	ip xfrm policy add src 10.1.1.200/32 dst 10.1.1.100/32 dir out \
-		tmpl src 172.16.1.200 dst 172.16.1.100 proto esp reqid 2 \
-		mode tunnel
-	# address & route
-	ip addr add dev veth1 10.1.1.200/32
-	ip route add 10.1.1.100 dev veth1 via 172.16.1.100 src 10.1.1.200
-}
-
-test_xfrm_tunnel()
-{
-	if [[ -e /sys/kernel/tracing/trace ]]; then
-		TRACE=/sys/kernel/tracing/trace
-	else
-		TRACE=/sys/kernel/debug/tracing/trace
-	fi
-	config_device
-	> ${TRACE}
-	setup_xfrm_tunnel
-	mkdir -p ${BPF_PIN_TUNNEL_DIR}
-	bpftool prog loadall ${BPF_FILE} ${BPF_PIN_TUNNEL_DIR}
-	tc qdisc add dev veth1 clsact
-	tc filter add dev veth1 proto ip ingress bpf da object-pinned \
-		${BPF_PIN_TUNNEL_DIR}/xfrm_get_state
-	ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
-	sleep 1
-	grep "reqid 1" ${TRACE}
-	check_err $?
-	grep "spi 0x1" ${TRACE}
-	check_err $?
-	grep "remote ip 0xac100164" ${TRACE}
-	check_err $?
-	cleanup
-
-	if [ $ret -ne 0 ]; then
-		echo -e ${RED}"FAIL: xfrm tunnel"${NC}
-		return 1
-	fi
-	echo -e ${GREEN}"PASS: xfrm tunnel"${NC}
-}
-
 attach_bpf()
 {
 	DEV=$1
@@ -630,10 +546,6 @@ cleanup()
 	ip link del ip6geneve11 2> /dev/null
 	ip link del erspan11 2> /dev/null
 	ip link del ip6erspan11 2> /dev/null
-	ip xfrm policy delete dir out src 10.1.1.200/32 dst 10.1.1.100/32 2> /dev/null
-	ip xfrm policy delete dir in src 10.1.1.100/32 dst 10.1.1.200/32 2> /dev/null
-	ip xfrm state delete src 172.16.1.100 dst 172.16.1.200 proto esp spi 0x1 2> /dev/null
-	ip xfrm state delete src 172.16.1.200 dst 172.16.1.100 proto esp spi 0x2 2> /dev/null
 }
 
 cleanup_exit()
@@ -716,10 +628,6 @@ bpf_tunnel_test()
 	test_ip6ip6
 	errors=$(( $errors + $? ))
 
-	echo "Testing IPSec tunnel..."
-	test_xfrm_tunnel
-	errors=$(( $errors + $? ))
-
 	return $errors
 }