net: marvell: prestera: Add driver for Prestera family ASIC devices

Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8
ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely
wireless SMB deployment.

The current implementation supports only boards designed for the Marvell
Switchdev solution and requires special firmware.

The core Prestera switching logic is implemented in prestera_main.c,
there is an intermediate hw layer between core logic and firmware. It is
implemented in prestera_hw.c, the purpose of it is to encapsulate hw
related logic, in future there is a plan to support more devices with
different HW related configurations.

This patch contains only basic switch initialization and RX/TX support
over SDMA mechanism.

Currently supported devices have DMA access range <= 32bit and require
ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb
allocated in proper range supported by the Prestera device.

Also meanwhile there is no TX interrupt support in current firmware
version so recycling work is scheduled on each xmit.

Port's mac address is generated from the switch base mac which may be
provided via device-tree (static one or as nvme cell), or randomly
generated. This is required by the firmware.

Co-developed-by: Andrii Savka <[email protected]>
Signed-off-by: Andrii Savka <[email protected]>
Co-developed-by: Oleksandr Mazur <[email protected]>
Signed-off-by: Oleksandr Mazur <[email protected]>
Co-developed-by: Serhiy Boiko <[email protected]>
Signed-off-by: Serhiy Boiko <[email protected]>
Co-developed-by: Serhiy Pshyk <[email protected]>
Signed-off-by: Serhiy Pshyk <[email protected]>
Co-developed-by: Taras Chornyi <[email protected]>
Signed-off-by: Taras Chornyi <[email protected]>
Co-developed-by: Volodymyr Mytnyk <[email protected]>
Signed-off-by: Volodymyr Mytnyk <[email protected]>
Signed-off-by: Vadym Kochan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

0 files changed, 0 insertions, 0 deletions