diff options
| author | Wadim Mueller <wafgo01@gmail.com> | 2024-03-24 22:43:26 +0100 |
|---|---|---|
| committer | Shawn Guo <shawnguo@kernel.org> | 2024-04-02 22:35:43 +0800 |
| commit | 44b305a2de85b810135ec99f5bd3d67e1ba14232 (patch) | |
| tree | d146d4ac61861d561643131b5af588be105df7bd /tools/perf/scripts/python/export-to-sqlite.py | |
| parent | b98807c7befe675d27a81406f9966f8c92bb88bb (diff) | |
arm64: dts: S32G3: Introduce device tree for S32G-VNP-RDB3
This commit adds device tree support for the NXP S32G3-based
S32G-VNP-RDB3 Board [1].
The S32G3 features an 8-core ARM Cortex-A53 based SoC developed by NXP.
The device tree files are derived from the official NXP downstream
Linux tree [2].
This addition encompasses a limited selection of peripherals that
are upstream-supported. Apart from the ARM System Modules
(GIC, Generic Timer, etc.), the following IPs have been validated:
* UART: fsl-linflexuart
* SDHC: fsl-imx-esdhc
Clock settings for the chip rely on ATF Firmware [3].
Pin control integration into the device tree is pending and currently
relies on Firmware/U-Boot settings [4].
These changes were validated using BSP39 Firmware/U-Boot from NXP [5].
The modifications enable booting the official Ubuntu 22.04 from NXP on
the RDB3 with default settings from the SD card and eMMC.
[1] https://www.nxp.com/design/design-center/designs/s32g3-vehicle-networking-reference-design:S32G-VNP-RDB3
[2] https://github.com/nxp-auto-linux/linux
[3] https://github.com/nxp-auto-linux/arm-trusted-firmware
[4] https://github.com/nxp-auto-linux/u-boot
[5] https://github.com/nxp-auto-linux/auto_yocto_bsp
Signed-off-by: Wadim Mueller <wafgo01@gmail.com>
Tested-by: Ghennadi Procopciuc <ghennadi.procopciuc@oss.nxp.com>
Reviewed-by: Ghennadi Procopciuc <ghennadi.procopciuc@oss.nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'tools/perf/scripts/python/export-to-sqlite.py')
0 files changed, 0 insertions, 0 deletions