Merge tag 'spi-nor/for-5.19' into mtd/next

SPI NOR core changes:
- Read back written SR value to make sure the write was done correctly.
- Introduce a common function for Read ID that manufacturer drivers can
  use to verify the Octal DTR switch worked correctly.
- Add helpers for read/write any register commands so manufacturer
  drivers don't open code it every time.
- Clarify rdsr dummy cycles documentation.
- Add debugfs entry to expose internal flash parameters and state.

SPI NOR manufacturer drivers changes:
- Add support for Winbond W25Q512NW-IM, and Eon EN25QH256A.
- Move spi_nor_write_ear() to Winbond module since only Winbond flashes
  use it.
- Rework Micron and Cypress Octal DTR enable methods to improve
  readability.
- Use the common Read ID function to verify switch to Octal DTR mode for
  Micron and Cypress flashes.
- Skip polling status on volatile register writes for Micron and Cypress
  flashes since the operation is instant.

Signed-off-by: Miquel Raynal <[email protected]>

1 files changed, 8 insertions, 2 deletions

diff --git a/sound/pci/cs4281.c b/sound/pci/cs4281.c
index e7367402b84a..0c9cadf7b3b8 100644
--- a/sound/pci/cs4281.c
+++ b/sound/pci/cs4281.c
@@ -1827,8 +1827,8 @@ static void snd_cs4281_opl3_command(struct snd_opl3 *opl3, unsigned short cmd,
 	spin_unlock_irqrestore(&opl3->reg_lock, flags);
 }
 
-static int snd_cs4281_probe(struct pci_dev *pci,
-			    const struct pci_device_id *pci_id)
+static int __snd_cs4281_probe(struct pci_dev *pci,
+			      const struct pci_device_id *pci_id)
 {
 	static int dev;
 	struct snd_card *card;
@@ -1888,6 +1888,12 @@ static int snd_cs4281_probe(struct pci_dev *pci,
 	return 0;
 }
 
+static int snd_cs4281_probe(struct pci_dev *pci,
+			    const struct pci_device_id *pci_id)
+{
+	return snd_card_free_on_error(&pci->dev, __snd_cs4281_probe(pci, pci_id));
+}
+
 /*
  * Power Management
  */