Merge tag 'spi-nor/for-5.19' into mtd/next

SPI NOR core changes:
- Read back written SR value to make sure the write was done correctly.
- Introduce a common function for Read ID that manufacturer drivers can
  use to verify the Octal DTR switch worked correctly.
- Add helpers for read/write any register commands so manufacturer
  drivers don't open code it every time.
- Clarify rdsr dummy cycles documentation.
- Add debugfs entry to expose internal flash parameters and state.

SPI NOR manufacturer drivers changes:
- Add support for Winbond W25Q512NW-IM, and Eon EN25QH256A.
- Move spi_nor_write_ear() to Winbond module since only Winbond flashes
  use it.
- Rework Micron and Cypress Octal DTR enable methods to improve
  readability.
- Use the common Read ID function to verify switch to Octal DTR mode for
  Micron and Cypress flashes.
- Skip polling status on volatile register writes for Micron and Cypress
  flashes since the operation is instant.

Signed-off-by: Miquel Raynal <[email protected]>

1 files changed, 6 insertions, 1 deletions

diff --git a/sound/isa/sc6000.c b/sound/isa/sc6000.c
index 26ab7ff80768..60398fced046 100644
--- a/sound/isa/sc6000.c
+++ b/sound/isa/sc6000.c
@@ -537,7 +537,7 @@ static void snd_sc6000_free(struct snd_card *card)
 		sc6000_setup_board(vport, 0);
 }
 
-static int snd_sc6000_probe(struct device *devptr, unsigned int dev)
+static int __snd_sc6000_probe(struct device *devptr, unsigned int dev)
 {
 	static const int possible_irqs[] = { 5, 7, 9, 10, 11, -1 };
 	static const int possible_dmas[] = { 1, 3, 0, -1 };
@@ -662,6 +662,11 @@ static int snd_sc6000_probe(struct device *devptr, unsigned int dev)
 	return 0;
 }
 
+static int snd_sc6000_probe(struct device *devptr, unsigned int dev)
+{
+	return snd_card_free_on_error(devptr, __snd_sc6000_probe(devptr, dev));
+}
+
 static struct isa_driver snd_sc6000_driver = {
 	.match		= snd_sc6000_match,
 	.probe		= snd_sc6000_probe,