ibm_newemac: Workaround reset timeout when no link

With some PHYs, when the link goes away, the EMAC reset fails due
to the loss of the RX clock I believe.

The old EMAC driver worked around that using some internal chip-specific
clock force bits that are different on various 44x implementations.

This is an attempt at doing it differently, by avoiding the reset when
there is no link, but forcing loopback mode instead. It seems to work
on my Taishan 440GX based board so far.

Signed-off-by: Benjamin Herrenschmidt <[email protected]>
Acked-by: Stefan Roese <[email protected]>
Signed-off-by: Jeff Garzik <[email protected]>

0 files changed, 0 insertions, 0 deletions