ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h

Rename tracehook_report_syscall_{entry,exit} to
ptrace_report_syscall_{entry,exit} and place them in ptrace.h

There is no longer any generic tracehook infractructure so make
these ptrace specific functions ptrace specific.

Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-3-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

5 files changed, 56 insertions, 56 deletions

diff --git a/include/asm-generic/syscall.h b/include/asm-generic/syscall.h
index 81695eb02a12..5a80fe728dc8 100644
--- a/include/asm-generic/syscall.h
+++ b/include/asm-generic/syscall.h
@@ -44,7 +44,7 @@ int syscall_get_nr(struct task_struct *task, struct pt_regs *regs);
  *
  * It's only valid to call this when @task is stopped for system
  * call exit tracing (due to %SYSCALL_WORK_SYSCALL_TRACE or
- * %SYSCALL_WORK_SYSCALL_AUDIT), after tracehook_report_syscall_entry()
+ * %SYSCALL_WORK_SYSCALL_AUDIT), after ptrace_report_syscall_entry()
  * returned nonzero to prevent the system call from taking place.
  *
  * This rolls back the register state in @regs so it's as if the
diff --git a/include/linux/entry-common.h b/include/linux/entry-common.h
index 2e2b8d6140ed..a670e9fba7a9 100644
--- a/include/linux/entry-common.h
+++ b/include/linux/entry-common.h
@@ -3,7 +3,7 @@
 #define __LINUX_ENTRYCOMMON_H
 
 #include <linux/static_call_types.h>
-#include <linux/tracehook.h>
+#include <linux/ptrace.h>
 #include <linux/syscalls.h>
 #include <linux/seccomp.h>
 #include <linux/sched.h>
@@ -95,7 +95,7 @@ static inline __must_check int arch_syscall_enter_tracehook(struct pt_regs *regs
 #ifndef arch_syscall_enter_tracehook
 static inline __must_check int arch_syscall_enter_tracehook(struct pt_regs *regs)
 {
-	return tracehook_report_syscall_entry(regs);
+	return ptrace_report_syscall_entry(regs);
 }
 #endif
 
@@ -294,7 +294,7 @@ static inline void arch_syscall_exit_tracehook(struct pt_regs *regs, bool step);
 #ifndef arch_syscall_exit_tracehook
 static inline void arch_syscall_exit_tracehook(struct pt_regs *regs, bool step)
 {
-	tracehook_report_syscall_exit(regs, step);
+	ptrace_report_syscall_exit(regs, step);
 }
 #endif
 
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index 91b1074edb4c..5310f43e4762 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -440,4 +440,55 @@ static inline int ptrace_report_syscall(unsigned long message)
 	current->ptrace_message = 0;
 	return fatal_signal_pending(current);
 }
+
+/**
+ * ptrace_report_syscall_entry - task is about to attempt a system call
+ * @regs:		user register state of current task
+ *
+ * This will be called if %SYSCALL_WORK_SYSCALL_TRACE or
+ * %SYSCALL_WORK_SYSCALL_EMU have been set, when the current task has just
+ * entered the kernel for a system call.  Full user register state is
+ * available here.  Changing the values in @regs can affect the system
+ * call number and arguments to be tried.  It is safe to block here,
+ * preventing the system call from beginning.
+ *
+ * Returns zero normally, or nonzero if the calling arch code should abort
+ * the system call.  That must prevent normal entry so no system call is
+ * made.  If @task ever returns to user mode after this, its register state
+ * is unspecified, but should be something harmless like an %ENOSYS error
+ * return.  It should preserve enough information so that syscall_rollback()
+ * can work (see asm-generic/syscall.h).
+ *
+ * Called without locks, just after entering kernel mode.
+ */
+static inline __must_check int ptrace_report_syscall_entry(
+	struct pt_regs *regs)
+{
+	return ptrace_report_syscall(PTRACE_EVENTMSG_SYSCALL_ENTRY);
+}
+
+/**
+ * ptrace_report_syscall_exit - task has just finished a system call
+ * @regs:		user register state of current task
+ * @step:		nonzero if simulating single-step or block-step
+ *
+ * This will be called if %SYSCALL_WORK_SYSCALL_TRACE has been set, when
+ * the current task has just finished an attempted system call.  Full
+ * user register state is available here.  It is safe to block here,
+ * preventing signals from being processed.
+ *
+ * If @step is nonzero, this report is also in lieu of the normal
+ * trap that would follow the system call instruction because
+ * user_enable_block_step() or user_enable_single_step() was used.
+ * In this case, %SYSCALL_WORK_SYSCALL_TRACE might not be set.
+ *
+ * Called without locks, just before checking for pending signals.
+ */
+static inline void ptrace_report_syscall_exit(struct pt_regs *regs, int step)
+{
+	if (step)
+		user_single_step_report(regs);
+	else
+		ptrace_report_syscall(PTRACE_EVENTMSG_SYSCALL_EXIT);
+}
 #endif
diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index 998bc3863559..819e82ac09bd 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -53,57 +53,6 @@ struct linux_binprm;
 
 
 /**
- * tracehook_report_syscall_entry - task is about to attempt a system call
- * @regs:		user register state of current task
- *
- * This will be called if %SYSCALL_WORK_SYSCALL_TRACE or
- * %SYSCALL_WORK_SYSCALL_EMU have been set, when the current task has just
- * entered the kernel for a system call.  Full user register state is
- * available here.  Changing the values in @regs can affect the system
- * call number and arguments to be tried.  It is safe to block here,
- * preventing the system call from beginning.
- *
- * Returns zero normally, or nonzero if the calling arch code should abort
- * the system call.  That must prevent normal entry so no system call is
- * made.  If @task ever returns to user mode after this, its register state
- * is unspecified, but should be something harmless like an %ENOSYS error
- * return.  It should preserve enough information so that syscall_rollback()
- * can work (see asm-generic/syscall.h).
- *
- * Called without locks, just after entering kernel mode.
- */
-static inline __must_check int tracehook_report_syscall_entry(
-	struct pt_regs *regs)
-{
-	return ptrace_report_syscall(PTRACE_EVENTMSG_SYSCALL_ENTRY);
-}
-
-/**
- * tracehook_report_syscall_exit - task has just finished a system call
- * @regs:		user register state of current task
- * @step:		nonzero if simulating single-step or block-step
- *
- * This will be called if %SYSCALL_WORK_SYSCALL_TRACE has been set, when
- * the current task has just finished an attempted system call.  Full
- * user register state is available here.  It is safe to block here,
- * preventing signals from being processed.
- *
- * If @step is nonzero, this report is also in lieu of the normal
- * trap that would follow the system call instruction because
- * user_enable_block_step() or user_enable_single_step() was used.
- * In this case, %SYSCALL_WORK_SYSCALL_TRACE might not be set.
- *
- * Called without locks, just before checking for pending signals.
- */
-static inline void tracehook_report_syscall_exit(struct pt_regs *regs, int step)
-{
-	if (step)
-		user_single_step_report(regs);
-	else
-		ptrace_report_syscall(PTRACE_EVENTMSG_SYSCALL_EXIT);
-}
-
-/**
  * tracehook_signal_handler - signal handler setup is complete
  * @stepping:		nonzero if debugger single-step or block-step in use
  *
diff --git a/include/uapi/linux/ptrace.h b/include/uapi/linux/ptrace.h
index 3747bf816f9a..b7af92e07d1f 100644
--- a/include/uapi/linux/ptrace.h
+++ b/include/uapi/linux/ptrace.h
@@ -114,7 +114,7 @@ struct ptrace_rseq_configuration {
 
 /*
  * These values are stored in task->ptrace_message
- * by tracehook_report_syscall_* to describe the current syscall-stop.
+ * by ptrace_report_syscall_* to describe the current syscall-stop.
  */
 #define PTRACE_EVENTMSG_SYSCALL_ENTRY	1
 #define PTRACE_EVENTMSG_SYSCALL_EXIT	2