Merge tag 'nand/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next

NAND core changes:
- use longest matching pattern in ->exec_op() default parser
- export NAND operation tracer
- add flag to indicate panic_write in MTD
- use kzalloc() instead of kmalloc() and memset()

Raw NAND controller drivers changes:
- brcmnand:
  * fix BCH ECC layout for large page NAND parts
  * fallback to detected ecc-strength, ecc-step-size
  * when oops in progress use pio and interrupt polling
  * code refactor code to introduce helper functions
  * add support for v7.3 controller
- FSMC:
  * use nand_op_trace for operation tracing
- GPMI:
  * move all driver code into single file
  * various cleanups (including dmaengine changes)
  * use runtime PM to manage clocks
  * implement exec_op
- MTK:
  * correct low level time calculation of r/w cycle
  * improve data sampling timing for read cycle
  * add validity check for CE# pin setting
  * fix wrongly assigned OOB buffer pointer issue
  * re-license MTK NAND driver as Dual MIT/GPL
- STM32:
  * manage the get_irq error case
  * increase DMA completion timeouts

Raw NAND chips drivers changes:
- Macronix: add read-retry support

Onenand driver changes:
- add support for 8Gb datasize chips
- avoid fall-through warnings

SPI-NAND changes:
- define macros for page-read ops with three-byte addresses
- add support for two-byte device IDs and then for GigaDevice
  GD5F1GQ4UFxxG
- add initial support for Paragon PN26G0xA
- handle the case where the last page read has bitflips

4 files changed, 10 insertions, 9 deletions

diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index 059dc2bedaf6..34711c5d6968 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 ifeq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h),)
 no-export-headers += a.out.h
 endif
diff --git a/include/uapi/linux/btf.h b/include/uapi/linux/btf.h
index 9310652ca4f9..63ae4a39e58b 100644
--- a/include/uapi/linux/btf.h
+++ b/include/uapi/linux/btf.h
@@ -83,7 +83,7 @@ struct btf_type {
  * is the 32 bits arrangement:
  */
 #define BTF_INT_ENCODING(VAL)	(((VAL) & 0x0f000000) >> 24)
-#define BTF_INT_OFFSET(VAL)	(((VAL  & 0x00ff0000)) >> 16)
+#define BTF_INT_OFFSET(VAL)	(((VAL) & 0x00ff0000) >> 16)
 #define BTF_INT_BITS(VAL)	((VAL)  & 0x000000ff)
 
 /* Attributes stored in the BTF_INT_ENCODING */
diff --git a/include/uapi/linux/rxrpc.h b/include/uapi/linux/rxrpc.h
index 9335d92c14a4..782069dcf607 100644
--- a/include/uapi/linux/rxrpc.h
+++ b/include/uapi/linux/rxrpc.h
@@ -1,12 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /* Types and definitions for AF_RXRPC.
  *
  * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
  * Written by David Howells ([email protected])
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
  */
 
 #ifndef _UAPI_LINUX_RXRPC_H
diff --git a/include/uapi/linux/tipc_config.h b/include/uapi/linux/tipc_config.h
index 4b2c93b1934c..4955e1a9f1bc 100644
--- a/include/uapi/linux/tipc_config.h
+++ b/include/uapi/linux/tipc_config.h
@@ -307,8 +307,10 @@ static inline int TLV_SET(void *tlv, __u16 type, void *data, __u16 len)
 	tlv_ptr = (struct tlv_desc *)tlv;
 	tlv_ptr->tlv_type = htons(type);
 	tlv_ptr->tlv_len  = htons(tlv_len);
-	if (len && data)
-		memcpy(TLV_DATA(tlv_ptr), data, tlv_len);
+	if (len && data) {
+		memcpy(TLV_DATA(tlv_ptr), data, len);
+		memset(TLV_DATA(tlv_ptr) + len, 0, TLV_SPACE(len) - tlv_len);
+	}
 	return TLV_SPACE(len);
 }
 
@@ -405,8 +407,10 @@ static inline int TCM_SET(void *msg, __u16 cmd, __u16 flags,
 	tcm_hdr->tcm_len   = htonl(msg_len);
 	tcm_hdr->tcm_type  = htons(cmd);
 	tcm_hdr->tcm_flags = htons(flags);
-	if (data_len && data)
+	if (data_len && data) {
 		memcpy(TCM_DATA(msg), data, data_len);
+		memset(TCM_DATA(msg) + data_len, 0, TCM_SPACE(data_len) - msg_len);
+	}
 	return TCM_SPACE(data_len);
 }