Merge tag 'linux-can-next-for-5.15-20210725' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

linux-can-next-for-5.15-20210725

Marc Kleine-Budde says:

====================
pull-request: can-next 2021-07-25

this is a pull request of 46 patches for net-next/master.

The first 6 patches target the CAN J1939 protocol. One is from
gushengxian, fixing a grammatical error, 5 are by me fixing a checkpatch
warning, make use of the fallthrough pseudo-keyword, and use
consistent variable naming.

The next 3 patches target the rx-offload helper, are by me and improve
the performance and fix the local softirq work pending error, when
napi_schedule() is called from threaded IRQ context.

The next 3 patches are by Vincent Mailhol and me update the CAN
bittiming and transmitter delay compensation, the documentation for
the struct can_tdc is fixed, clear data_bittiming if FD mode is turned
off and a redundant check is removed.

Followed by 4 patches targeting the m_can driver. Faiz Abbas's patches
add support for CAN PHY via the generic phy subsystem. Yang Yingliang
converts the driver to use devm_platform_ioremap_resource_byname().
And a patch by me which removes the unused support for custom bit
timing.

Andy Shevchenko contributes 2 patches for the mcp251xfd driver to
prepare the driver for ACPI support. A patch by me adds support for
shared IRQ handlers.

Zhen Lei contributes 3 patches to convert the esd_usb2, janz-ican3 and
the at91_can driver to make use of the DEVICE_ATTR_RO/RW() macros.

The next 8 patches are by Peng Li and provide general cleanups for the
at91_can driver.

The next 7 patches target the peak driver. Frist 2 cleanup patches by
me for the peak_pci driver, followed by Stephane Grosjean' patch to
print the name and firmware version of the detected hardware. The
peak_usb driver gets a cleanup patch, loopback and one-shot mode and
an upgrading of the bus state change handling in Stephane Grosjean's
patches.

Vincent Mailhol provides 6 cleanup patches for the etas_es58x driver.

In the last 3 patches Angelo Dureghello add support for the mcf5441x
SoC to the flexcan driver.
====================

Signed-off-by: David S. Miller <[email protected]>

3 files changed, 28 insertions, 7 deletions

diff --git a/include/linux/can/bittiming.h b/include/linux/can/bittiming.h
index ae7a3411167c..9de6e9053e34 100644
--- a/include/linux/can/bittiming.h
+++ b/include/linux/can/bittiming.h
@@ -37,7 +37,7 @@
  *	quanta, from when the bit is sent on the TX pin to when it is
  *	received on the RX pin of the transmitter. Possible options:
  *
- *	  O: automatic mode. The controller dynamically measure @tdcv
+ *	  0: automatic mode. The controller dynamically measures @tdcv
  *	  for each transmitted CAN FD frame.
  *
  *	  Other values: manual mode. Use the fixed provided value.
@@ -45,7 +45,7 @@
  * @tdco: Transmitter Delay Compensation Offset. Offset value, in time
  *	quanta, defining the distance between the start of the bit
  *	reception on the RX pin of the transceiver and the SSP
- *	position such as SSP = @tdcv + @tdco.
+ *	position such that SSP = @tdcv + @tdco.
  *
  *	If @tdco is zero, then TDC is disabled and both @tdcv and
  *	@tdcf should be ignored.
diff --git a/include/linux/can/platform/flexcan.h b/include/linux/can/platform/flexcan.h
new file mode 100644
index 000000000000..1b536fb999de
--- /dev/null
+++ b/include/linux/can/platform/flexcan.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021  Angelo Dureghello <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CAN_PLATFORM_FLEXCAN_H
+#define _CAN_PLATFORM_FLEXCAN_H
+
+struct flexcan_platform_data {
+	u32 clock_frequency;
+	u8 clk_src;
+};
+
+#endif /* _CAN_PLATFORM_FLEXCAN_H */
diff --git a/include/linux/can/rx-offload.h b/include/linux/can/rx-offload.h
index 40882df7105e..c11477620403 100644
--- a/include/linux/can/rx-offload.h
+++ b/include/linux/can/rx-offload.h
@@ -20,6 +20,7 @@ struct can_rx_offload {
 					bool drop);
 
 	struct sk_buff_head skb_queue;
+	struct sk_buff_head skb_irq_queue;
 	u32 skb_queue_len_max;
 
 	unsigned int mb_first;
@@ -48,14 +49,11 @@ unsigned int can_rx_offload_get_echo_skb(struct can_rx_offload *offload,
 					 unsigned int *frame_len_ptr);
 int can_rx_offload_queue_tail(struct can_rx_offload *offload,
 			      struct sk_buff *skb);
+void can_rx_offload_irq_finish(struct can_rx_offload *offload);
+void can_rx_offload_threaded_irq_finish(struct can_rx_offload *offload);
 void can_rx_offload_del(struct can_rx_offload *offload);
 void can_rx_offload_enable(struct can_rx_offload *offload);
 
-static inline void can_rx_offload_schedule(struct can_rx_offload *offload)
-{
-	napi_schedule(&offload->napi);
-}
-
 static inline void can_rx_offload_disable(struct can_rx_offload *offload)
 {
 	napi_disable(&offload->napi);