Merge tag 'gpio-omap-descriptors-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio into gpio/for-next

This removes all usage of global GPIO numbers from
arch/arm/mach-omap[12].

The patches have been reviewed and tested by everyone
who showed interest which was one person that tested
on OSK1 and Nokia 770, and we smoked out the bugs and
also addressed all review comments.

Any remaining problems can certainly be fixed in-tree.

6 files changed, 4 insertions, 29 deletions

diff --git a/include/linux/mfd/tps65010.h b/include/linux/mfd/tps65010.h
index a1fb9bc5311d..5edf1aef1118 100644
--- a/include/linux/mfd/tps65010.h
+++ b/include/linux/mfd/tps65010.h
@@ -28,6 +28,8 @@
 #ifndef __LINUX_I2C_TPS65010_H
 #define __LINUX_I2C_TPS65010_H
 
+struct gpio_chip;
+
 /*
  * ----------------------------------------------------------------------------
  * Registers, all 8 bits
@@ -176,12 +178,10 @@ struct i2c_client;
 
 /**
  * struct tps65010_board - packages GPIO and LED lines
- * @base: the GPIO number to assign to GPIO-1
  * @outmask: bit (N-1) is set to allow GPIO-N to be used as an
  *	(open drain) output
  * @setup: optional callback issued once the GPIOs are valid
  * @teardown: optional callback issued before the GPIOs are invalidated
- * @context: optional parameter passed to setup() and teardown()
  *
  * Board data may be used to package the GPIO (and LED) lines for use
  * in by the generic GPIO and LED frameworks.  The first four GPIOs
@@ -193,12 +193,9 @@ struct i2c_client;
  * devices in their initial states using these GPIOs.
  */
 struct tps65010_board {
-	int				base;
 	unsigned			outmask;
-
-	int		(*setup)(struct i2c_client *client, void *context);
-	int		(*teardown)(struct i2c_client *client, void *context);
-	void		*context;
+	int		(*setup)(struct i2c_client *client, struct gpio_chip *gc);
+	void		(*teardown)(struct i2c_client *client, struct gpio_chip *gc);
 };
 
 #endif /*  __LINUX_I2C_TPS65010_H */
diff --git a/include/linux/mfd/twl.h b/include/linux/mfd/twl.h
index 6e3d99b7a0ee..c062d91a67d9 100644
--- a/include/linux/mfd/twl.h
+++ b/include/linux/mfd/twl.h
@@ -593,9 +593,6 @@ struct twl4030_gpio_platform_data {
 	 */
 	u32		pullups;
 	u32		pulldowns;
-
-	int		(*setup)(struct device *dev,
-				unsigned gpio, unsigned ngpio);
 };
 
 struct twl4030_madc_platform_data {
diff --git a/include/linux/platform_data/lcd-mipid.h b/include/linux/platform_data/lcd-mipid.h
index 63f05eb23827..4927cfc5158c 100644
--- a/include/linux/platform_data/lcd-mipid.h
+++ b/include/linux/platform_data/lcd-mipid.h
@@ -15,10 +15,8 @@ enum mipid_test_result {
 #ifdef __KERNEL__
 
 struct mipid_platform_data {
-	int	nreset_gpio;
 	int	data_lines;
 
-	void	(*shutdown)(struct mipid_platform_data *pdata);
 	void	(*set_bklight_level)(struct mipid_platform_data *pdata,
 				     int level);
 	int	(*get_bklight_level)(struct mipid_platform_data *pdata);
diff --git a/include/linux/platform_data/mmc-omap.h b/include/linux/platform_data/mmc-omap.h
index 91051e9907f3..054d0c3c5ec5 100644
--- a/include/linux/platform_data/mmc-omap.h
+++ b/include/linux/platform_data/mmc-omap.h
@@ -20,8 +20,6 @@ struct omap_mmc_platform_data {
 	 * maximum frequency on the MMC bus */
 	unsigned int max_freq;
 
-	/* switch the bus to a new slot */
-	int (*switch_slot)(struct device *dev, int slot);
 	/* initialize board-specific MMC functionality, can be NULL if
 	 * not supported */
 	int (*init)(struct device *dev);
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
index d424c1aadf38..a04c1c34c344 100644
--- a/include/linux/spi/ads7846.h
+++ b/include/linux/spi/ads7846.h
@@ -35,8 +35,6 @@ struct ads7846_platform_data {
 	u16	debounce_tol;		/* tolerance used for filtering */
 	u16	debounce_rep;		/* additional consecutive good readings
 					 * required after the first two */
-	int	gpio_pendown;		/* the GPIO used to decide the pendown
-					 * state if get_pendown_state == NULL */
 	int	gpio_pendown_debounce;	/* platform specific debounce time for
 					 * the gpio_pendown */
 	int	(*get_pendown_state)(void);
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index e4a3ad3c800f..3963e55e88a3 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -99,9 +99,6 @@ struct musb_hdrc_platform_data {
 	/* (HOST or OTG) program PHY for external Vbus */
 	unsigned	extvbus:1;
 
-	/* Power the device on or off */
-	int		(*set_power)(int state);
-
 	/* MUSB configuration-specific details */
 	const struct musb_hdrc_config *config;
 
@@ -135,14 +132,4 @@ static inline int musb_mailbox(enum musb_vbus_id_status status)
 #define	TUSB6010_REFCLK_24	41667	/* psec/clk @ 24.0 MHz XI */
 #define	TUSB6010_REFCLK_19	52083	/* psec/clk @ 19.2 MHz CLKIN */
 
-#ifdef	CONFIG_ARCH_OMAP2
-
-extern int __init tusb6010_setup_interface(
-		struct musb_hdrc_platform_data *data,
-		unsigned ps_refclk, unsigned waitpin,
-		unsigned async_cs, unsigned sync_cs,
-		unsigned irq, unsigned dmachan);
-
-#endif	/* OMAP2 */
-
 #endif /* __LINUX_USB_MUSB_H */