Merge tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC drivers from Arnd Bergmann:
 "The SoC driver updates contain changes to improve support for
  additional SoC variants, as well as cleanups an minor bugfixes
  in a number of existing drivers.

  Notable updates this time include:

   - Support for Qualcomm MSM8909 (Snapdragon 210) in various drivers

   - Updates for interconnect drivers on Qualcomm Snapdragon

   - A new driver support for NMI interrupts on Fujitsu A64fx

   - A rework of Broadcom BCMBCA Kconfig dependencies

   - Improved support for BCM2711 (Raspberry Pi 4) power management to
     allow the use of the V3D GPU

   - Cleanups to the NXP guts driver

   - Arm SCMI firmware driver updates to add tracing support, and use
     the firmware interfaces for system power control and for power
     capping"

* tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (125 commits)
  soc: a64fx-diag: disable modular build
  dt-bindings: soc: qcom: qcom,smd-rpm: add power-controller
  dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp
  dt-bindings: soc: qcom,rpmh-rsc: simplify qcom,tcs-config
  ARM: mach-qcom: Add support for MSM8909
  dt-bindings: arm: cpus: Document "qcom,msm8909-smp" enable-method
  soc: qcom: spm: Add CPU data for MSM8909
  dt-bindings: soc: qcom: spm: Add MSM8909 CPU compatible
  soc: qcom: rpmpd: Add compatible for MSM8909
  dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains
  soc: qcom: smd-rpm: Add compatible for MSM8909
  dt-bindings: soc: qcom: smd-rpm: Add MSM8909
  soc: qcom: icc-bwmon: Remove unnecessary print function dev_err()
  soc: fujitsu: Add A64FX diagnostic interrupt driver
  soc: qcom: socinfo: Fix the id of SA8540P SoC
  soc: qcom: Make QCOM_RPMPD depend on PM
  tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  ...

3 files changed, 162 insertions, 0 deletions

diff --git a/include/linux/mfd/bcm2835-pm.h b/include/linux/mfd/bcm2835-pm.h
index ed37dc40e82a..f70a810c55f7 100644
--- a/include/linux/mfd/bcm2835-pm.h
+++ b/include/linux/mfd/bcm2835-pm.h
@@ -9,6 +9,7 @@ struct bcm2835_pm {
 	struct device *dev;
 	void __iomem *base;
 	void __iomem *asb;
+	void __iomem *rpivid_asb;
 };
 
 #endif /* BCM2835_MFD_PM_H */
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index 704111f63993..7f4f9df1b20f 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -561,6 +561,116 @@ struct scmi_voltage_proto_ops {
 };
 
 /**
+ * struct scmi_powercap_info  - Describe one available Powercap domain
+ *
+ * @id: Domain ID as advertised by the platform.
+ * @notify_powercap_cap_change: CAP change notification support.
+ * @notify_powercap_measurement_change: MEASUREMENTS change notifications
+ *				       support.
+ * @async_powercap_cap_set: Asynchronous CAP set support.
+ * @powercap_cap_config: CAP configuration support.
+ * @powercap_monitoring: Monitoring (measurements) support.
+ * @powercap_pai_config: PAI configuration support.
+ * @powercap_scale_mw: Domain reports power data in milliwatt units.
+ * @powercap_scale_uw: Domain reports power data in microwatt units.
+ *		       Note that, when both @powercap_scale_mw and
+ *		       @powercap_scale_uw are set to false, the domain
+ *		       reports power data on an abstract linear scale.
+ * @name: name assigned to the Powercap Domain by platform.
+ * @min_pai: Minimum configurable PAI.
+ * @max_pai: Maximum configurable PAI.
+ * @pai_step: Step size between two consecutive PAI values.
+ * @min_power_cap: Minimum configurable CAP.
+ * @max_power_cap: Maximum configurable CAP.
+ * @power_cap_step: Step size between two consecutive CAP values.
+ * @sustainable_power: Maximum sustainable power consumption for this domain
+ *		       under normal conditions.
+ * @accuracy: The accuracy with which the power is measured and reported in
+ *	      integral multiples of 0.001 percent.
+ * @parent_id: Identifier of the containing parent power capping domain, or the
+ *	       value 0xFFFFFFFF if this powercap domain is a root domain not
+ *	       contained in any other domain.
+ */
+struct scmi_powercap_info {
+	unsigned int id;
+	bool notify_powercap_cap_change;
+	bool notify_powercap_measurement_change;
+	bool async_powercap_cap_set;
+	bool powercap_cap_config;
+	bool powercap_monitoring;
+	bool powercap_pai_config;
+	bool powercap_scale_mw;
+	bool powercap_scale_uw;
+	bool fastchannels;
+	char name[SCMI_MAX_STR_SIZE];
+	unsigned int min_pai;
+	unsigned int max_pai;
+	unsigned int pai_step;
+	unsigned int min_power_cap;
+	unsigned int max_power_cap;
+	unsigned int power_cap_step;
+	unsigned int sustainable_power;
+	unsigned int accuracy;
+#define SCMI_POWERCAP_ROOT_ZONE_ID     0xFFFFFFFFUL
+	unsigned int parent_id;
+	struct scmi_fc_info *fc_info;
+};
+
+/**
+ * struct scmi_powercap_proto_ops - represents the various operations provided
+ * by SCMI Powercap Protocol
+ *
+ * @num_domains_get: get the count of powercap domains provided by SCMI.
+ * @info_get: get the information for the specified domain.
+ * @cap_get: get the current CAP value for the specified domain.
+ * @cap_set: set the CAP value for the specified domain to the provided value;
+ *	     if the domain supports setting the CAP with an asynchronous command
+ *	     this request will finally trigger an asynchronous transfer, but, if
+ *	     @ignore_dresp here is set to true, this call will anyway return
+ *	     immediately without waiting for the related delayed response.
+ * @pai_get: get the current PAI value for the specified domain.
+ * @pai_set: set the PAI value for the specified domain to the provided value.
+ * @measurements_get: retrieve the current average power measurements for the
+ *		      specified domain and the related PAI upon which is
+ *		      calculated.
+ * @measurements_threshold_set: set the desired low and high power thresholds
+ *				to be used when registering for notification
+ *				of type POWERCAP_MEASUREMENTS_NOTIFY with this
+ *				powercap domain.
+ *				Note that this must be called at least once
+ *				before registering any callback with the usual
+ *				@scmi_notify_ops; moreover, in case this method
+ *				is called with measurement notifications already
+ *				enabled it will also trigger, transparently, a
+ *				proper update of the power thresholds configured
+ *				in the SCMI backend server.
+ * @measurements_threshold_get: get the currently configured low and high power
+ *				thresholds used when registering callbacks for
+ *				notification POWERCAP_MEASUREMENTS_NOTIFY.
+ */
+struct scmi_powercap_proto_ops {
+	int (*num_domains_get)(const struct scmi_protocol_handle *ph);
+	const struct scmi_powercap_info __must_check *(*info_get)
+		(const struct scmi_protocol_handle *ph, u32 domain_id);
+	int (*cap_get)(const struct scmi_protocol_handle *ph, u32 domain_id,
+		       u32 *power_cap);
+	int (*cap_set)(const struct scmi_protocol_handle *ph, u32 domain_id,
+		       u32 power_cap, bool ignore_dresp);
+	int (*pai_get)(const struct scmi_protocol_handle *ph, u32 domain_id,
+		       u32 *pai);
+	int (*pai_set)(const struct scmi_protocol_handle *ph, u32 domain_id,
+		       u32 pai);
+	int (*measurements_get)(const struct scmi_protocol_handle *ph,
+				u32 domain_id, u32 *average_power, u32 *pai);
+	int (*measurements_threshold_set)(const struct scmi_protocol_handle *ph,
+					  u32 domain_id, u32 power_thresh_low,
+					  u32 power_thresh_high);
+	int (*measurements_threshold_get)(const struct scmi_protocol_handle *ph,
+					  u32 domain_id, u32 *power_thresh_low,
+					  u32 *power_thresh_high);
+};
+
+/**
  * struct scmi_notify_ops  - represents notifications' operations provided by
  * SCMI core
  * @devm_event_notifier_register: Managed registration of a notifier_block for
@@ -624,6 +734,9 @@ struct scmi_notify_ops {
  *
  * @dev: pointer to the SCMI device
  * @version: pointer to the structure containing SCMI version information
+ * @devm_protocol_acquire: devres managed method to get hold of a protocol,
+ *			   causing its initialization and related resource
+ *			   accounting
  * @devm_protocol_get: devres managed method to acquire a protocol and get specific
  *		       operations and a dedicated protocol handler
  * @devm_protocol_put: devres managed method to release a protocol
@@ -642,6 +755,8 @@ struct scmi_handle {
 	struct device *dev;
 	struct scmi_revision_info *version;
 
+	int __must_check (*devm_protocol_acquire)(struct scmi_device *sdev,
+						  u8 proto);
 	const void __must_check *
 		(*devm_protocol_get)(struct scmi_device *sdev, u8 proto,
 				     struct scmi_protocol_handle **ph);
@@ -661,6 +776,7 @@ enum scmi_std_protocol {
 	SCMI_PROTOCOL_SENSOR = 0x15,
 	SCMI_PROTOCOL_RESET = 0x16,
 	SCMI_PROTOCOL_VOLTAGE = 0x17,
+	SCMI_PROTOCOL_POWERCAP = 0x18,
 };
 
 enum scmi_system_events {
@@ -762,6 +878,8 @@ enum scmi_notification_events {
 	SCMI_EVENT_RESET_ISSUED = 0x0,
 	SCMI_EVENT_BASE_ERROR_EVENT = 0x0,
 	SCMI_EVENT_SYSTEM_POWER_STATE_NOTIFIER = 0x0,
+	SCMI_EVENT_POWERCAP_CAP_CHANGED = 0x0,
+	SCMI_EVENT_POWERCAP_MEASUREMENTS_CHANGED = 0x1,
 };
 
 struct scmi_power_state_changed_report {
@@ -781,8 +899,10 @@ struct scmi_clock_rate_notif_report {
 struct scmi_system_power_state_notifier_report {
 	ktime_t		timestamp;
 	unsigned int	agent_id;
+#define SCMI_SYSPOWER_IS_REQUEST_GRACEFUL(flags)	((flags) & BIT(0))
 	unsigned int	flags;
 	unsigned int	system_state;
+	unsigned int	timeout;
 };
 
 struct scmi_perf_limits_report {
@@ -830,4 +950,18 @@ struct scmi_base_error_report {
 	unsigned long long	reports[];
 };
 
+struct scmi_powercap_cap_changed_report {
+	ktime_t		timestamp;
+	unsigned int	agent_id;
+	unsigned int	domain_id;
+	unsigned int	power_cap;
+	unsigned int	pai;
+};
+
+struct scmi_powercap_meas_changed_report {
+	ktime_t		timestamp;
+	unsigned int	agent_id;
+	unsigned int	domain_id;
+	unsigned int	power;
+};
 #endif /* _LINUX_SCMI_PROTOCOL_H */
diff --git a/include/linux/soc/mediatek/mtk-mutex.h b/include/linux/soc/mediatek/mtk-mutex.h
index 6fe4ffbde290..a0f4f51a3b45 100644
--- a/include/linux/soc/mediatek/mtk-mutex.h
+++ b/include/linux/soc/mediatek/mtk-mutex.h
@@ -10,11 +10,33 @@ struct regmap;
 struct device;
 struct mtk_mutex;
 
+enum mtk_mutex_mod_index {
+	/* MDP table index */
+	MUTEX_MOD_IDX_MDP_RDMA0,
+	MUTEX_MOD_IDX_MDP_RSZ0,
+	MUTEX_MOD_IDX_MDP_RSZ1,
+	MUTEX_MOD_IDX_MDP_TDSHP0,
+	MUTEX_MOD_IDX_MDP_WROT0,
+	MUTEX_MOD_IDX_MDP_WDMA,
+	MUTEX_MOD_IDX_MDP_AAL0,
+	MUTEX_MOD_IDX_MDP_CCORR0,
+
+	MUTEX_MOD_IDX_MAX		/* ALWAYS keep at the end */
+};
+
+enum mtk_mutex_sof_index {
+	MUTEX_SOF_IDX_SINGLE_MODE,
+
+	MUTEX_SOF_IDX_MAX		/* ALWAYS keep at the end */
+};
+
 struct mtk_mutex *mtk_mutex_get(struct device *dev);
 int mtk_mutex_prepare(struct mtk_mutex *mutex);
 void mtk_mutex_add_comp(struct mtk_mutex *mutex,
 			enum mtk_ddp_comp_id id);
 void mtk_mutex_enable(struct mtk_mutex *mutex);
+int mtk_mutex_enable_by_cmdq(struct mtk_mutex *mutex,
+			     void *pkt);
 void mtk_mutex_disable(struct mtk_mutex *mutex);
 void mtk_mutex_remove_comp(struct mtk_mutex *mutex,
 			   enum mtk_ddp_comp_id id);
@@ -22,5 +44,10 @@ void mtk_mutex_unprepare(struct mtk_mutex *mutex);
 void mtk_mutex_put(struct mtk_mutex *mutex);
 void mtk_mutex_acquire(struct mtk_mutex *mutex);
 void mtk_mutex_release(struct mtk_mutex *mutex);
+int mtk_mutex_write_mod(struct mtk_mutex *mutex,
+			enum mtk_mutex_mod_index idx,
+			bool clear);
+int mtk_mutex_write_sof(struct mtk_mutex *mutex,
+			enum mtk_mutex_sof_index idx);
 
 #endif /* MTK_MUTEX_H */