Merge tag 'usb-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big USB patch set for the 3.6-rc1 merge window.

  Lots of little changes in here, primarily for gadget controllers and
  drivers.  There's some scsi changes that I think also went in through
  the scsi tree, but they merge just fine.  All of these patches have
  been in the linux-next tree for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up trivial conflicts in include/scsi/scsi_device.h (same libata
conflict that Jeff had already encountered)

* tag 'usb-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits)
  usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  usb: Add quirk detection based on interface information
  usb: s3c-hsotg: Add header file protection macros in s3c-hsotg.h
  USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer
  USB: add USB_VENDOR_AND_INTERFACE_INFO() macro
  USB: notify phy when root hub port connect change
  USB: remove 8 bytes of padding from usb_host_interface on 64 bit builds
  USB: option: add ZTE MF821D
  USB: sierra: QMI mode MC7710 moved to qcserial
  USB: qcserial: adding Sierra Wireless devices
  USB: qcserial: support generic Qualcomm serial ports
  USB: qcserial: make probe more flexible
  USB: qcserial: centralize probe exit path
  USB: qcserial: consolidate usb_set_interface calls
  USB: ehci-s5p: Add support for device tree
  USB: ohci-exynos: Add support for device tree
  USB: ehci-omap: fix compile failure(v1)
  usb: host: tegra: pass correct pointer in ehci_setup()
  USB: ehci-fsl: Update ifdef check to work on 64-bit ppc
  USB: serial: keyspan: Removed unrequired parentheses.
  ...

1 files changed, 62 insertions, 5 deletions

diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index 38ab3f46346f..45824be0a2f9 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -43,6 +43,13 @@ enum usb_phy_events {
 	USB_EVENT_ENUMERATED,   /* gadget driver enumerated */
 };
 
+/* associate a type with PHY */
+enum usb_phy_type {
+	USB_PHY_TYPE_UNDEFINED,
+	USB_PHY_TYPE_USB2,
+	USB_PHY_TYPE_USB3,
+};
+
 struct usb_phy;
 
 /* for transceivers connected thru an ULPI interface, the user must
@@ -89,6 +96,7 @@ struct usb_phy {
 	const char		*label;
 	unsigned int		 flags;
 
+	enum usb_phy_type	type;
 	enum usb_otg_state	state;
 	enum usb_phy_events	last_event;
 
@@ -105,6 +113,9 @@ struct usb_phy {
 	u16			port_status;
 	u16			port_change;
 
+	/* to support controllers that have multiple transceivers */
+	struct list_head	head;
+
 	/* initialize/shutdown the OTG controller */
 	int	(*init)(struct usb_phy *x);
 	void	(*shutdown)(struct usb_phy *x);
@@ -117,11 +128,15 @@ struct usb_phy {
 	int	(*set_suspend)(struct usb_phy *x,
 				int suspend);
 
+	/* notify phy connect status change */
+	int	(*notify_connect)(struct usb_phy *x, int port);
+	int	(*notify_disconnect)(struct usb_phy *x, int port);
 };
 
 
 /* for board-specific init logic */
-extern int usb_set_transceiver(struct usb_phy *);
+extern int usb_add_phy(struct usb_phy *, enum usb_phy_type type);
+extern void usb_remove_phy(struct usb_phy *);
 
 #if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))
 /* sometimes transceivers are accessed only through e.g. ULPI */
@@ -172,16 +187,29 @@ usb_phy_shutdown(struct usb_phy *x)
 
 /* for usb host and peripheral controller drivers */
 #ifdef CONFIG_USB_OTG_UTILS
-extern struct usb_phy *usb_get_transceiver(void);
-extern void usb_put_transceiver(struct usb_phy *);
+extern struct usb_phy *usb_get_phy(enum usb_phy_type type);
+extern struct usb_phy *devm_usb_get_phy(struct device *dev,
+	enum usb_phy_type type);
+extern void usb_put_phy(struct usb_phy *);
+extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x);
 extern const char *otg_state_string(enum usb_otg_state state);
 #else
-static inline struct usb_phy *usb_get_transceiver(void)
+static inline struct usb_phy *usb_get_phy(enum usb_phy_type type)
+{
+	return NULL;
+}
+
+static inline struct usb_phy *devm_usb_get_phy(struct device *dev,
+	enum usb_phy_type type)
 {
 	return NULL;
 }
 
-static inline void usb_put_transceiver(struct usb_phy *x)
+static inline void usb_put_phy(struct usb_phy *x)
+{
+}
+
+static inline void devm_usb_put_phy(struct device *dev, struct usb_phy *x)
 {
 }
 
@@ -252,6 +280,24 @@ usb_phy_set_suspend(struct usb_phy *x, int suspend)
 }
 
 static inline int
+usb_phy_notify_connect(struct usb_phy *x, int port)
+{
+	if (x->notify_connect)
+		return x->notify_connect(x, port);
+	else
+		return 0;
+}
+
+static inline int
+usb_phy_notify_disconnect(struct usb_phy *x, int port)
+{
+	if (x->notify_disconnect)
+		return x->notify_disconnect(x, port);
+	else
+		return 0;
+}
+
+static inline int
 otg_start_srp(struct usb_otg *otg)
 {
 	if (otg && otg->start_srp)
@@ -276,4 +322,15 @@ usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb)
 /* for OTG controller drivers (and maybe other stuff) */
 extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
 
+static inline const char *usb_phy_type_string(enum usb_phy_type type)
+{
+	switch (type) {
+	case USB_PHY_TYPE_USB2:
+		return "USB2 PHY";
+	case USB_PHY_TYPE_USB3:
+		return "USB3 PHY";
+	default:
+		return "UNKNOWN PHY TYPE";
+	}
+}
 #endif /* __LINUX_USB_OTG_H */