Merge drm/drm-next into drm-misc-next-fixes

Backmerging to update drm-misc-next-fixes for the final phase
of the release cycle.

Signed-off-by: Thomas Zimmermann <[email protected]>

13 files changed, 69 insertions, 205 deletions

diff --git a/include/linux/platform_data/adp5588.h b/include/linux/platform_data/adp5588.h
deleted file mode 100644
index 6d3f7d911a92..000000000000
--- a/include/linux/platform_data/adp5588.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Analog Devices ADP5588 I/O Expander and QWERTY Keypad Controller
- *
- * Copyright 2009-2010 Analog Devices Inc.
- */
-
-#ifndef _ADP5588_H
-#define _ADP5588_H
-
-#define DEV_ID 0x00		/* Device ID */
-#define CFG 0x01		/* Configuration Register1 */
-#define INT_STAT 0x02		/* Interrupt Status Register */
-#define KEY_LCK_EC_STAT 0x03	/* Key Lock and Event Counter Register */
-#define Key_EVENTA 0x04		/* Key Event Register A */
-#define Key_EVENTB 0x05		/* Key Event Register B */
-#define Key_EVENTC 0x06		/* Key Event Register C */
-#define Key_EVENTD 0x07		/* Key Event Register D */
-#define Key_EVENTE 0x08		/* Key Event Register E */
-#define Key_EVENTF 0x09		/* Key Event Register F */
-#define Key_EVENTG 0x0A		/* Key Event Register G */
-#define Key_EVENTH 0x0B		/* Key Event Register H */
-#define Key_EVENTI 0x0C		/* Key Event Register I */
-#define Key_EVENTJ 0x0D		/* Key Event Register J */
-#define KP_LCK_TMR 0x0E		/* Keypad Lock1 to Lock2 Timer */
-#define UNLOCK1 0x0F		/* Unlock Key1 */
-#define UNLOCK2 0x10		/* Unlock Key2 */
-#define GPIO_INT_STAT1 0x11	/* GPIO Interrupt Status */
-#define GPIO_INT_STAT2 0x12	/* GPIO Interrupt Status */
-#define GPIO_INT_STAT3 0x13	/* GPIO Interrupt Status */
-#define GPIO_DAT_STAT1 0x14	/* GPIO Data Status, Read twice to clear */
-#define GPIO_DAT_STAT2 0x15	/* GPIO Data Status, Read twice to clear */
-#define GPIO_DAT_STAT3 0x16	/* GPIO Data Status, Read twice to clear */
-#define GPIO_DAT_OUT1 0x17	/* GPIO DATA OUT */
-#define GPIO_DAT_OUT2 0x18	/* GPIO DATA OUT */
-#define GPIO_DAT_OUT3 0x19	/* GPIO DATA OUT */
-#define GPIO_INT_EN1 0x1A	/* GPIO Interrupt Enable */
-#define GPIO_INT_EN2 0x1B	/* GPIO Interrupt Enable */
-#define GPIO_INT_EN3 0x1C	/* GPIO Interrupt Enable */
-#define KP_GPIO1 0x1D		/* Keypad or GPIO Selection */
-#define KP_GPIO2 0x1E		/* Keypad or GPIO Selection */
-#define KP_GPIO3 0x1F		/* Keypad or GPIO Selection */
-#define GPI_EM1 0x20		/* GPI Event Mode 1 */
-#define GPI_EM2 0x21		/* GPI Event Mode 2 */
-#define GPI_EM3 0x22		/* GPI Event Mode 3 */
-#define GPIO_DIR1 0x23		/* GPIO Data Direction */
-#define GPIO_DIR2 0x24		/* GPIO Data Direction */
-#define GPIO_DIR3 0x25		/* GPIO Data Direction */
-#define GPIO_INT_LVL1 0x26	/* GPIO Edge/Level Detect */
-#define GPIO_INT_LVL2 0x27	/* GPIO Edge/Level Detect */
-#define GPIO_INT_LVL3 0x28	/* GPIO Edge/Level Detect */
-#define Debounce_DIS1 0x29	/* Debounce Disable */
-#define Debounce_DIS2 0x2A	/* Debounce Disable */
-#define Debounce_DIS3 0x2B	/* Debounce Disable */
-#define GPIO_PULL1 0x2C		/* GPIO Pull Disable */
-#define GPIO_PULL2 0x2D		/* GPIO Pull Disable */
-#define GPIO_PULL3 0x2E		/* GPIO Pull Disable */
-#define CMP_CFG_STAT 0x30	/* Comparator Configuration and Status Register */
-#define CMP_CONFG_SENS1 0x31	/* Sensor1 Comparator Configuration Register */
-#define CMP_CONFG_SENS2 0x32	/* L2 Light Sensor Reference Level, Output Falling for Sensor 1 */
-#define CMP1_LVL2_TRIP 0x33	/* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 1 */
-#define CMP1_LVL2_HYS 0x34	/* L3 Light Sensor Reference Level, Output Falling For Sensor 1 */
-#define CMP1_LVL3_TRIP 0x35	/* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 1 */
-#define CMP1_LVL3_HYS 0x36	/* Sensor 2 Comparator Configuration Register */
-#define CMP2_LVL2_TRIP 0x37	/* L2 Light Sensor Reference Level, Output Falling for Sensor 2 */
-#define CMP2_LVL2_HYS 0x38	/* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 2 */
-#define CMP2_LVL3_TRIP 0x39	/* L3 Light Sensor Reference Level, Output Falling For Sensor 2 */
-#define CMP2_LVL3_HYS 0x3A	/* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 2 */
-#define CMP1_ADC_DAT_R1 0x3B	/* Comparator 1 ADC data Register1 */
-#define CMP1_ADC_DAT_R2 0x3C	/* Comparator 1 ADC data Register2 */
-#define CMP2_ADC_DAT_R1 0x3D	/* Comparator 2 ADC data Register1 */
-#define CMP2_ADC_DAT_R2 0x3E	/* Comparator 2 ADC data Register2 */
-
-#define ADP5588_DEVICE_ID_MASK	0xF
-
- /* Configuration Register1 */
-#define ADP5588_AUTO_INC	(1 << 7)
-#define ADP5588_GPIEM_CFG	(1 << 6)
-#define ADP5588_OVR_FLOW_M	(1 << 5)
-#define ADP5588_INT_CFG		(1 << 4)
-#define ADP5588_OVR_FLOW_IEN	(1 << 3)
-#define ADP5588_K_LCK_IM	(1 << 2)
-#define ADP5588_GPI_IEN		(1 << 1)
-#define ADP5588_KE_IEN		(1 << 0)
-
-/* Interrupt Status Register */
-#define ADP5588_CMP2_INT	(1 << 5)
-#define ADP5588_CMP1_INT	(1 << 4)
-#define ADP5588_OVR_FLOW_INT	(1 << 3)
-#define ADP5588_K_LCK_INT	(1 << 2)
-#define ADP5588_GPI_INT		(1 << 1)
-#define ADP5588_KE_INT		(1 << 0)
-
-/* Key Lock and Event Counter Register */
-#define ADP5588_K_LCK_EN	(1 << 6)
-#define ADP5588_LCK21		0x30
-#define ADP5588_KEC		0xF
-
-#define ADP5588_MAXGPIO		18
-#define ADP5588_BANK(offs)	((offs) >> 3)
-#define ADP5588_BIT(offs)	(1u << ((offs) & 0x7))
-
-/* Put one of these structures in i2c_board_info platform_data */
-
-#define ADP5588_KEYMAPSIZE	80
-
-#define GPI_PIN_ROW0 97
-#define GPI_PIN_ROW1 98
-#define GPI_PIN_ROW2 99
-#define GPI_PIN_ROW3 100
-#define GPI_PIN_ROW4 101
-#define GPI_PIN_ROW5 102
-#define GPI_PIN_ROW6 103
-#define GPI_PIN_ROW7 104
-#define GPI_PIN_COL0 105
-#define GPI_PIN_COL1 106
-#define GPI_PIN_COL2 107
-#define GPI_PIN_COL3 108
-#define GPI_PIN_COL4 109
-#define GPI_PIN_COL5 110
-#define GPI_PIN_COL6 111
-#define GPI_PIN_COL7 112
-#define GPI_PIN_COL8 113
-#define GPI_PIN_COL9 114
-
-#define GPI_PIN_ROW_BASE GPI_PIN_ROW0
-#define GPI_PIN_ROW_END GPI_PIN_ROW7
-#define GPI_PIN_COL_BASE GPI_PIN_COL0
-#define GPI_PIN_COL_END GPI_PIN_COL9
-
-#define GPI_PIN_BASE GPI_PIN_ROW_BASE
-#define GPI_PIN_END GPI_PIN_COL_END
-
-#define ADP5588_GPIMAPSIZE_MAX (GPI_PIN_END - GPI_PIN_BASE + 1)
-
-struct adp5588_gpi_map {
-	unsigned short pin;
-	unsigned short sw_evt;
-};
-
-struct adp5588_kpad_platform_data {
-	int rows;			/* Number of rows */
-	int cols;			/* Number of columns */
-	const unsigned short *keymap;	/* Pointer to keymap */
-	unsigned short keymapsize;	/* Keymap size */
-	unsigned repeat:1;		/* Enable key repeat */
-	unsigned en_keylock:1;		/* Enable Key Lock feature */
-	unsigned short unlock_key1;	/* Unlock Key 1 */
-	unsigned short unlock_key2;	/* Unlock Key 2 */
-	const struct adp5588_gpi_map *gpimap;
-	unsigned short gpimapsize;
-	const struct adp5588_gpio_platform_data *gpio_data;
-};
-
-struct i2c_client; /* forward declaration */
-
-struct adp5588_gpio_platform_data {
-	int gpio_start;		/* GPIO Chip base # */
-	const char *const *names;
-	unsigned irq_base;	/* interrupt base # */
-	unsigned pullup_dis_mask; /* Pull-Up Disable Mask */
-	int	(*setup)(struct i2c_client *client,
-				unsigned gpio, unsigned ngpio,
-				void *context);
-	int	(*teardown)(struct i2c_client *client,
-				unsigned gpio, unsigned ngpio,
-				void *context);
-	void	*context;
-};
-
-#endif
diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h
index 8b1b795867a1..5744a2d746aa 100644
--- a/include/linux/platform_data/cros_ec_commands.h
+++ b/include/linux/platform_data/cros_ec_commands.h
@@ -5724,8 +5724,21 @@ enum typec_control_command {
 	TYPEC_CONTROL_COMMAND_EXIT_MODES,
 	TYPEC_CONTROL_COMMAND_CLEAR_EVENTS,
 	TYPEC_CONTROL_COMMAND_ENTER_MODE,
+	TYPEC_CONTROL_COMMAND_TBT_UFP_REPLY,
+	TYPEC_CONTROL_COMMAND_USB_MUX_SET,
 };
 
+/* Replies the AP may specify to the TBT EnterMode command as a UFP */
+enum typec_tbt_ufp_reply {
+	TYPEC_TBT_UFP_REPLY_NAK,
+	TYPEC_TBT_UFP_REPLY_ACK,
+};
+
+struct typec_usb_mux_set {
+	uint8_t mux_index;	/* Index of the mux to set in the chain */
+	uint8_t mux_flags;	/* USB_PD_MUX_*-encoded USB mux state to set */
+} __ec_align1;
+
 struct ec_params_typec_control {
 	uint8_t port;
 	uint8_t command;	/* enum typec_control_command */
@@ -5739,6 +5752,8 @@ struct ec_params_typec_control {
 	union {
 		uint32_t clear_events_mask;
 		uint8_t mode_to_enter;      /* enum typec_mode */
+		uint8_t tbt_ufp_reply;      /* enum typec_tbt_ufp_reply */
+		struct typec_usb_mux_set mux_params;
 		uint8_t placeholder[128];
 	};
 } __ec_align1;
@@ -5817,6 +5832,9 @@ enum tcpc_cc_polarity {
 #define PD_STATUS_EVENT_SOP_DISC_DONE		BIT(0)
 #define PD_STATUS_EVENT_SOP_PRIME_DISC_DONE	BIT(1)
 #define PD_STATUS_EVENT_HARD_RESET		BIT(2)
+#define PD_STATUS_EVENT_DISCONNECTED		BIT(3)
+#define PD_STATUS_EVENT_MUX_0_SET_DONE		BIT(4)
+#define PD_STATUS_EVENT_MUX_1_SET_DONE		BIT(5)
 
 struct ec_params_typec_status {
 	uint8_t port;
diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h
index 408b29ca4004..e43107e0bee1 100644
--- a/include/linux/platform_data/cros_ec_proto.h
+++ b/include/linux/platform_data/cros_ec_proto.h
@@ -169,6 +169,7 @@ struct cros_ec_device {
 	int event_size;
 	u32 host_event_wake_mask;
 	u32 last_resume_result;
+	u16 suspend_timeout_ms;
 	ktime_t last_event_time;
 	struct notifier_block notifier_ready;
 
diff --git a/include/linux/platform_data/dma-hsu.h b/include/linux/platform_data/dma-hsu.h
index c65b412b2b33..611bae193c1c 100644
--- a/include/linux/platform_data/dma-hsu.h
+++ b/include/linux/platform_data/dma-hsu.h
@@ -8,7 +8,7 @@
 #ifndef _PLATFORM_DATA_DMA_HSU_H
 #define _PLATFORM_DATA_DMA_HSU_H
 
-#include <linux/device.h>
+struct device;
 
 struct hsu_dma_slave {
 	struct device	*dma_dev;
diff --git a/include/linux/platform_data/emc2305.h b/include/linux/platform_data/emc2305.h
new file mode 100644
index 000000000000..54d672dd6f7d
--- /dev/null
+++ b/include/linux/platform_data/emc2305.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __LINUX_PLATFORM_DATA_EMC2305__
+#define __LINUX_PLATFORM_DATA_EMC2305__
+
+#define EMC2305_PWM_MAX	5
+
+/**
+ * struct emc2305_platform_data - EMC2305 driver platform data
+ * @max_state: maximum cooling state of the cooling device;
+ * @pwm_num: number of active channels;
+ * @pwm_separate: separate PWM settings for every channel;
+ * @pwm_min: array of minimum PWM per channel;
+ */
+struct emc2305_platform_data {
+	u8 max_state;
+	u8 pwm_num;
+	bool pwm_separate;
+	u8 pwm_min[EMC2305_PWM_MAX];
+};
+
+#endif
diff --git a/include/linux/platform_data/pca953x.h b/include/linux/platform_data/pca953x.h
index 4eb53e023997..96c1a14ab365 100644
--- a/include/linux/platform_data/pca953x.h
+++ b/include/linux/platform_data/pca953x.h
@@ -22,7 +22,7 @@ struct pca953x_platform_data {
 	int		(*setup)(struct i2c_client *client,
 				unsigned gpio, unsigned ngpio,
 				void *context);
-	int		(*teardown)(struct i2c_client *client,
+	void		(*teardown)(struct i2c_client *client,
 				unsigned gpio, unsigned ngpio,
 				void *context);
 	const char	*const *names;
diff --git a/include/linux/platform_data/ssm2518.h b/include/linux/platform_data/ssm2518.h
deleted file mode 100644
index 3f9e632d6f63..000000000000
--- a/include/linux/platform_data/ssm2518.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * SSM2518 amplifier audio driver
- *
- * Copyright 2013 Analog Devices Inc.
- *  Author: Lars-Peter Clausen <[email protected]>
- */
-
-#ifndef __LINUX_PLATFORM_DATA_SSM2518_H__
-#define __LINUX_PLATFORM_DATA_SSM2518_H__
-
-/**
- * struct ssm2518_platform_data - Platform data for the ssm2518 driver
- * @enable_gpio: GPIO connected to the nSD pin. Set to -1 if the nSD pin is
- *            hardwired.
- */
-struct ssm2518_platform_data {
-	int enable_gpio;
-};
-
-#endif
diff --git a/include/linux/platform_data/tps68470.h b/include/linux/platform_data/tps68470.h
index 126d082c3f2e..e605a2cab07f 100644
--- a/include/linux/platform_data/tps68470.h
+++ b/include/linux/platform_data/tps68470.h
@@ -27,9 +27,14 @@ struct tps68470_regulator_platform_data {
 	const struct regulator_init_data *reg_init_data[TPS68470_NUM_REGULATORS];
 };
 
-struct tps68470_clk_platform_data {
+struct tps68470_clk_consumer {
 	const char *consumer_dev_name;
 	const char *consumer_con_id;
 };
 
+struct tps68470_clk_platform_data {
+	unsigned int n_consumers;
+	struct tps68470_clk_consumer consumers[];
+};
+
 #endif
diff --git a/include/linux/platform_data/usb-s3c2410_udc.h b/include/linux/platform_data/usb-s3c2410_udc.h
index 07394819d03b..c0fbe1fe3426 100644
--- a/include/linux/platform_data/usb-s3c2410_udc.h
+++ b/include/linux/platform_data/usb-s3c2410_udc.h
@@ -22,12 +22,6 @@ enum s3c2410_udc_cmd_e {
 struct s3c2410_udc_mach_info {
 	void	(*udc_command)(enum s3c2410_udc_cmd_e);
 	void	(*vbus_draw)(unsigned int ma);
-
-	unsigned int pullup_pin;
-	unsigned int pullup_pin_inverted;
-
-	unsigned int vbus_pin;
-	unsigned char vbus_pin_inverted;
 };
 
 extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h
index 98f2b2f20f3e..28234dc9fa6a 100644
--- a/include/linux/platform_data/x86/asus-wmi.h
+++ b/include/linux/platform_data/x86/asus-wmi.h
@@ -65,6 +65,7 @@
 #define ASUS_WMI_DEVID_PANEL_OD		0x00050019
 #define ASUS_WMI_DEVID_CAMERA		0x00060013
 #define ASUS_WMI_DEVID_LID_FLIP		0x00060062
+#define ASUS_WMI_DEVID_LID_FLIP_ROG	0x00060077
 
 /* Storage */
 #define ASUS_WMI_DEVID_CARDREADER	0x00080013
@@ -78,6 +79,7 @@
 #define ASUS_WMI_DEVID_THERMAL_CTRL	0x00110011
 #define ASUS_WMI_DEVID_FAN_CTRL		0x00110012 /* deprecated */
 #define ASUS_WMI_DEVID_CPU_FAN_CTRL	0x00110013
+#define ASUS_WMI_DEVID_GPU_FAN_CTRL	0x00110014
 #define ASUS_WMI_DEVID_CPU_FAN_CURVE	0x00110024
 #define ASUS_WMI_DEVID_GPU_FAN_CURVE	0x00110025
 
@@ -99,6 +101,15 @@
 /* dgpu on/off */
 #define ASUS_WMI_DEVID_DGPU		0x00090020
 
+/* gpu mux switch, 0 = dGPU, 1 = Optimus */
+#define ASUS_WMI_DEVID_GPU_MUX		0x00090016
+
+/* TUF laptop RGB modes/colours */
+#define ASUS_WMI_DEVID_TUF_RGB_MODE	0x00100056
+
+/* TUF laptop RGB power/state */
+#define ASUS_WMI_DEVID_TUF_RGB_STATE	0x00100057
+
 /* DSTS masks */
 #define ASUS_WMI_DSTS_STATUS_BIT	0x00000001
 #define ASUS_WMI_DSTS_UNKNOWN_BIT	0x00000002
diff --git a/include/linux/platform_data/x86/pmc_atom.h b/include/linux/platform_data/x86/pmc_atom.h
index 3edfb6d4e67a..b8a701c77fd0 100644
--- a/include/linux/platform_data/x86/pmc_atom.h
+++ b/include/linux/platform_data/x86/pmc_atom.h
@@ -1,12 +1,14 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Intel Atom SOC Power Management Controller Header File
- * Copyright (c) 2014, Intel Corporation.
+ * Intel Atom SoC Power Management Controller Header File
+ * Copyright (c) 2014-2015,2022 Intel Corporation.
  */
 
 #ifndef PMC_ATOM_H
 #define PMC_ATOM_H
 
+#include <linux/bits.h>
+
 /* ValleyView Power Control Unit PCI Device ID */
 #define	PCI_DEVICE_ID_VLV_PMC	0x0F1C
 /* CherryTrail Power Control Unit PCI Device ID */
@@ -139,9 +141,9 @@
 #define	ACPI_MMIO_REG_LEN	0x100
 
 #define	PM1_CNT			0x4
-#define	SLEEP_TYPE_MASK		0xFFFFECFF
+#define	SLEEP_TYPE_MASK		GENMASK(12, 10)
 #define	SLEEP_TYPE_S5		0x1C00
-#define	SLEEP_ENABLE		0x2000
+#define	SLEEP_ENABLE		BIT(13)
 
 extern int pmc_atom_read(int offset, u32 *value);
 
diff --git a/include/linux/platform_data/x86/simatic-ipc-base.h b/include/linux/platform_data/x86/simatic-ipc-base.h
index 39fefd48cf4d..57d6a10dfc9e 100644
--- a/include/linux/platform_data/x86/simatic-ipc-base.h
+++ b/include/linux/platform_data/x86/simatic-ipc-base.h
@@ -19,6 +19,7 @@
 #define SIMATIC_IPC_DEVICE_427E 2
 #define SIMATIC_IPC_DEVICE_127E 3
 #define SIMATIC_IPC_DEVICE_227E 4
+#define SIMATIC_IPC_DEVICE_227G 5
 
 struct simatic_ipc_platform {
 	u8	devmode;
diff --git a/include/linux/platform_data/x86/simatic-ipc.h b/include/linux/platform_data/x86/simatic-ipc.h
index f3b76b39776b..632320ec8f08 100644
--- a/include/linux/platform_data/x86/simatic-ipc.h
+++ b/include/linux/platform_data/x86/simatic-ipc.h
@@ -31,6 +31,8 @@ enum simatic_ipc_station_ids {
 	SIMATIC_IPC_IPC427E = 0x00000A01,
 	SIMATIC_IPC_IPC477E = 0x00000A02,
 	SIMATIC_IPC_IPC127E = 0x00000D01,
+	SIMATIC_IPC_IPC227G = 0x00000F01,
+	SIMATIC_IPC_IPC427G = 0x00001001,
 };
 
 static inline u32 simatic_ipc_get_station_id(u8 *data, int max_len)