Merge branch 'for-5.7/appleir' into for-linus

- small code cleanups in hid-appleir from Lucas Tanure

1 files changed, 55 insertions, 0 deletions

diff --git a/include/linux/fsl/enetc_mdio.h b/include/linux/fsl/enetc_mdio.h
new file mode 100644
index 000000000000..4875dd38af7e
--- /dev/null
+++ b/include/linux/fsl/enetc_mdio.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/* Copyright 2019 NXP */
+
+#ifndef _FSL_ENETC_MDIO_H_
+#define _FSL_ENETC_MDIO_H_
+
+#include <linux/phy.h>
+
+/* PCS registers */
+#define ENETC_PCS_LINK_TIMER1			0x12
+#define ENETC_PCS_LINK_TIMER1_VAL		0x06a0
+#define ENETC_PCS_LINK_TIMER2			0x13
+#define ENETC_PCS_LINK_TIMER2_VAL		0x0003
+#define ENETC_PCS_IF_MODE			0x14
+#define ENETC_PCS_IF_MODE_SGMII_EN		BIT(0)
+#define ENETC_PCS_IF_MODE_USE_SGMII_AN		BIT(1)
+#define ENETC_PCS_IF_MODE_SGMII_SPEED(x)	(((x) << 2) & GENMASK(3, 2))
+
+/* Not a mistake, the SerDes PLL needs to be set at 3.125 GHz by Reset
+ * Configuration Word (RCW, outside Linux control) for 2.5G SGMII mode. The PCS
+ * still thinks it's at gigabit.
+ */
+enum enetc_pcs_speed {
+	ENETC_PCS_SPEED_10	= 0,
+	ENETC_PCS_SPEED_100	= 1,
+	ENETC_PCS_SPEED_1000	= 2,
+	ENETC_PCS_SPEED_2500	= 2,
+};
+
+struct enetc_hw;
+
+struct enetc_mdio_priv {
+	struct enetc_hw *hw;
+	int mdio_base;
+};
+
+#if IS_REACHABLE(CONFIG_FSL_ENETC_MDIO)
+
+int enetc_mdio_read(struct mii_bus *bus, int phy_id, int regnum);
+int enetc_mdio_write(struct mii_bus *bus, int phy_id, int regnum, u16 value);
+struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs);
+
+#else
+
+static inline int enetc_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
+{ return -EINVAL; }
+static inline int enetc_mdio_write(struct mii_bus *bus, int phy_id, int regnum,
+				   u16 value)
+{ return -EINVAL; }
+struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
+{ return ERR_PTR(-EINVAL); }
+
+#endif
+
+#endif