Merge tag 'perf-tools-fixes-for-v6.4-2-2023-05-30' into perf-tools-next

perf tools fixes for v6.4: 2nd batch

- Fix BPF CO-RE naming convention for checking the availability of fields on
  'union perf_mem_data_src' on the running kernel.

- Remove the use of llvm-strip on BPF skel object files, not needed, fixes a
  build breakage when the llvm package, that contains it in most distros, isn't
  installed.

- Fix tools that use both evsel->{bpf_counter_list,bpf_filters}, removing them from a
  union.

- Remove extra "--" from the 'perf ftrace latency' --use-nsec option,
  previously it was working only when using the '-n' alternative.

- Don't stop building when both binutils-devel and a C++ compiler isn't
  available to compile the alternative C++ demangle support code, disable that
  feature instead.

- Sync the linux/in.h and coresight-pmu.h header copies with the kernel sources.

- Fix relative include path to cs-etm.h.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

6 files changed, 36 insertions, 10 deletions

diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c
index f801b1f5b46c..af0e1c070187 100644
--- a/drivers/tty/serial/8250/8250_bcm7271.c
+++ b/drivers/tty/serial/8250/8250_bcm7271.c
@@ -1012,7 +1012,7 @@ static int brcmuart_probe(struct platform_device *pdev)
 	of_property_read_u32(np, "clock-frequency", &clk_rate);
 
 	/* See if a Baud clock has been specified */
-	baud_mux_clk = of_clk_get_by_name(np, "sw_baud");
+	baud_mux_clk = devm_clk_get(dev, "sw_baud");
 	if (IS_ERR(baud_mux_clk)) {
 		if (PTR_ERR(baud_mux_clk) == -EPROBE_DEFER) {
 			ret = -EPROBE_DEFER;
@@ -1032,7 +1032,7 @@ static int brcmuart_probe(struct platform_device *pdev)
 	if (clk_rate == 0) {
 		dev_err(dev, "clock-frequency or clk not defined\n");
 		ret = -EINVAL;
-		goto release_dma;
+		goto err_clk_disable;
 	}
 
 	dev_dbg(dev, "DMA is %senabled\n", priv->dma_enabled ? "" : "not ");
@@ -1119,6 +1119,8 @@ err1:
 	serial8250_unregister_port(priv->line);
 err:
 	brcmuart_free_bufs(dev, priv);
+err_clk_disable:
+	clk_disable_unprepare(baud_mux_clk);
 release_dma:
 	if (priv->dma_enabled)
 		brcmuart_arbitration(priv, 0);
@@ -1133,6 +1135,7 @@ static int brcmuart_remove(struct platform_device *pdev)
 	hrtimer_cancel(&priv->hrt);
 	serial8250_unregister_port(priv->line);
 	brcmuart_free_bufs(&pdev->dev, priv);
+	clk_disable_unprepare(priv->baud_mux_clk);
 	if (priv->dma_enabled)
 		brcmuart_arbitration(priv, 0);
 	return 0;
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 64770c62bbec..b406cba10b0e 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -40,9 +40,13 @@
 #define PCI_DEVICE_ID_COMMTECH_4224PCIE		0x0020
 #define PCI_DEVICE_ID_COMMTECH_4228PCIE		0x0021
 #define PCI_DEVICE_ID_COMMTECH_4222PCIE		0x0022
+
 #define PCI_DEVICE_ID_EXAR_XR17V4358		0x4358
 #define PCI_DEVICE_ID_EXAR_XR17V8358		0x8358
 
+#define PCI_SUBDEVICE_ID_USR_2980		0x0128
+#define PCI_SUBDEVICE_ID_USR_2981		0x0129
+
 #define PCI_DEVICE_ID_SEALEVEL_710xC		0x1001
 #define PCI_DEVICE_ID_SEALEVEL_720xC		0x1002
 #define PCI_DEVICE_ID_SEALEVEL_740xC		0x1004
@@ -829,6 +833,15 @@ static const struct exar8250_board pbn_exar_XR17V8358 = {
 		(kernel_ulong_t)&bd			\
 	}
 
+#define USR_DEVICE(devid, sdevid, bd) {			\
+	PCI_DEVICE_SUB(					\
+		PCI_VENDOR_ID_USR,			\
+		PCI_DEVICE_ID_EXAR_##devid,		\
+		PCI_VENDOR_ID_EXAR,			\
+		PCI_SUBDEVICE_ID_USR_##sdevid), 0, 0,	\
+		(kernel_ulong_t)&bd			\
+	}
+
 static const struct pci_device_id exar_pci_tbl[] = {
 	EXAR_DEVICE(ACCESSIO, COM_2S, pbn_exar_XR17C15x),
 	EXAR_DEVICE(ACCESSIO, COM_4S, pbn_exar_XR17C15x),
@@ -853,6 +866,10 @@ static const struct pci_device_id exar_pci_tbl[] = {
 
 	IBM_DEVICE(XR17C152, SATURN_SERIAL_ONE_PORT, pbn_exar_ibm_saturn),
 
+	/* USRobotics USR298x-OEM PCI Modems */
+	USR_DEVICE(XR17C152, 2980, pbn_exar_XR17C15x),
+	USR_DEVICE(XR17C152, 2981, pbn_exar_XR17C15x),
+
 	/* Exar Corp. XR17C15[248] Dual/Quad/Octal UART */
 	EXAR_DEVICE(EXAR, XR17C152, pbn_exar_XR17C15x),
 	EXAR_DEVICE(EXAR, XR17C154, pbn_exar_XR17C15x),
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index c55be6fda0ca..e80c4f6551a1 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1920,6 +1920,8 @@ pci_moxa_setup(struct serial_private *priv,
 #define PCI_SUBDEVICE_ID_SIIG_DUAL_30	0x2530
 #define PCI_VENDOR_ID_ADVANTECH		0x13fe
 #define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66
+#define PCI_DEVICE_ID_ADVANTECH_PCI1600	0x1600
+#define PCI_DEVICE_ID_ADVANTECH_PCI1600_1611	0x1611
 #define PCI_DEVICE_ID_ADVANTECH_PCI3620	0x3620
 #define PCI_DEVICE_ID_ADVANTECH_PCI3618	0x3618
 #define PCI_DEVICE_ID_ADVANTECH_PCIf618	0xf618
@@ -4085,6 +4087,9 @@ static SIMPLE_DEV_PM_OPS(pciserial_pm_ops, pciserial_suspend_one,
 			 pciserial_resume_one);
 
 static const struct pci_device_id serial_pci_tbl[] = {
+	{	PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI1600,
+		PCI_DEVICE_ID_ADVANTECH_PCI1600_1611, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
 	/* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */
 	{	PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
 		PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0,
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index fe8d79c4ae95..c153ba3a018a 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -669,6 +669,7 @@ EXPORT_SYMBOL_GPL(serial8250_em485_supported);
 /**
  * serial8250_em485_config() - generic ->rs485_config() callback
  * @port: uart port
+ * @termios: termios structure
  * @rs485: rs485 settings
  *
  * Generic callback usable by 8250 uart drivers to activate rs485 settings
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c
index 59e25f2b6632..4b2512eef577 100644
--- a/drivers/tty/serial/arc_uart.c
+++ b/drivers/tty/serial/arc_uart.c
@@ -606,10 +606,11 @@ static int arc_serial_probe(struct platform_device *pdev)
 	}
 	uart->baud = val;
 
-	port->membase = of_iomap(np, 0);
-	if (!port->membase)
+	port->membase = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(port->membase)) {
 		/* No point of dev_err since UART itself is hosed here */
-		return -ENXIO;
+		return PTR_ERR(port->membase);
+	}
 
 	port->irq = irq_of_parse_and_map(np, 0);
 
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 08dc3e2a729c..8582479f0211 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1664,19 +1664,18 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 	uport->private_data = &port->private_data;
 	platform_set_drvdata(pdev, port);
 
-	ret = uart_add_one_port(drv, uport);
-	if (ret)
-		return ret;
-
 	irq_set_status_flags(uport->irq, IRQ_NOAUTOEN);
 	ret = devm_request_irq(uport->dev, uport->irq, qcom_geni_serial_isr,
 			IRQF_TRIGGER_HIGH, port->name, uport);
 	if (ret) {
 		dev_err(uport->dev, "Failed to get IRQ ret %d\n", ret);
-		uart_remove_one_port(drv, uport);
 		return ret;
 	}
 
+	ret = uart_add_one_port(drv, uport);
+	if (ret)
+		return ret;
+
 	/*
 	 * Set pm_runtime status as ACTIVE so that wakeup_irq gets
 	 * enabled/disabled from dev_pm_arm_wake_irq during system