Merge tag 'spi-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "This is quite a quiet release for SPI. The one new core feature here
  is support for configuring the state of the MOSI pin when the bus is
  idle, there are some devices which are very fragile in this regard
  even when the chip select signal is not asserted. Otherwise we have
  some new driver support, a bunch of small fixes and some general
  cleanup work.

   - Support for configuring the state of the MOSI pin when the the bus
     is idle

   - Add the Elgin JG0309-01 in spidev

   - Support for Marvell xSPI, Mediatek MTK7981, Microchip PIC64GX, NXP
     i.MX8ULP, and Rockchip RK3576 controllers

  I also accidentally pulled in an IIO DT bindings update due to a typo
  when applying the MOSI idle state patches"

* tag 'spi-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (65 commits)
  spi: geni-qcom: Use devm functions to simplify code
  spi: remove spi_controller_is_slave() and spi_slave_abort()
  platform/olpc: olpc-xo175-ec: switch to use spi_target_abort().
  spi: slave-mt27xx: switch to use target_abort
  spi: spidev: switch to use spi_target_abort()
  spi: slave-system-control: switch to use spi_target_abort()
  spi: slave-time: switch to use spi_target_abort()
  spi: switch to use spi_controller_is_target()
  spi: fspi: add support for imx8ulp
  spi: fspi: involve lut_num for struct nxp_fspi_devtype_data
  dt-bindings: spi: nxp-fspi: add imx8ulp support
  spi: spidev_fdx: Fix the wrong format specifier
  spi: mxs: Switch to RUNTIME/SYSTEM_SLEEP_PM_OPS()
  spi: dt-bindings: Add rockchip,rk3576-spi compatible
  spi: Revert "spi: Insert the missing pci_dev_put()before return"
  spi: zynq-qspi: Replace kzalloc with kmalloc for buffer allocation
  spi: ppc4xx: Sort headers
  spi: ppc4xx: Revert "handle irq_of_parse_and_map() errors"
  spi: zynqmp-gqspi: Simplify with dev_err_probe()
  spi: zynqmp-gqspi: Use devm_spi_alloc_host()
  ...

1 files changed, 36 insertions, 21 deletions

diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
index 6585b19a4866..5a1e55a01c52 100644
--- a/drivers/spi/spi-nxp-fspi.c
+++ b/drivers/spi/spi-nxp-fspi.c
@@ -57,13 +57,6 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/spi-mem.h>
 
-/*
- * The driver only uses one single LUT entry, that is updated on
- * each call of exec_op(). Index 0 is preset at boot with a basic
- * read operation, so let's use the last entry (31).
- */
-#define	SEQID_LUT			31
-
 /* Registers used by the driver */
 #define FSPI_MCR0			0x00
 #define FSPI_MCR0_AHB_TIMEOUT(x)	((x) << 24)
@@ -263,9 +256,6 @@
 #define FSPI_TFDR			0x180
 
 #define FSPI_LUT_BASE			0x200
-#define FSPI_LUT_OFFSET			(SEQID_LUT * 4 * 4)
-#define FSPI_LUT_REG(idx) \
-	(FSPI_LUT_BASE + FSPI_LUT_OFFSET + (idx) * 4)
 
 /* register map end */
 
@@ -341,6 +331,7 @@ struct nxp_fspi_devtype_data {
 	unsigned int txfifo;
 	unsigned int ahb_buf_size;
 	unsigned int quirks;
+	unsigned int lut_num;
 	bool little_endian;
 };
 
@@ -349,6 +340,7 @@ static struct nxp_fspi_devtype_data lx2160a_data = {
 	.txfifo = SZ_1K,        /* (128 * 64 bits)  */
 	.ahb_buf_size = SZ_2K,  /* (256 * 64 bits)  */
 	.quirks = 0,
+	.lut_num = 32,
 	.little_endian = true,  /* little-endian    */
 };
 
@@ -357,6 +349,7 @@ static struct nxp_fspi_devtype_data imx8mm_data = {
 	.txfifo = SZ_1K,        /* (128 * 64 bits)  */
 	.ahb_buf_size = SZ_2K,  /* (256 * 64 bits)  */
 	.quirks = 0,
+	.lut_num = 32,
 	.little_endian = true,  /* little-endian    */
 };
 
@@ -365,6 +358,7 @@ static struct nxp_fspi_devtype_data imx8qxp_data = {
 	.txfifo = SZ_1K,        /* (128 * 64 bits)  */
 	.ahb_buf_size = SZ_2K,  /* (256 * 64 bits)  */
 	.quirks = 0,
+	.lut_num = 32,
 	.little_endian = true,  /* little-endian    */
 };
 
@@ -373,6 +367,16 @@ static struct nxp_fspi_devtype_data imx8dxl_data = {
 	.txfifo = SZ_1K,        /* (128 * 64 bits)  */
 	.ahb_buf_size = SZ_2K,  /* (256 * 64 bits)  */
 	.quirks = FSPI_QUIRK_USE_IP_ONLY,
+	.lut_num = 32,
+	.little_endian = true,  /* little-endian    */
+};
+
+static struct nxp_fspi_devtype_data imx8ulp_data = {
+	.rxfifo = SZ_512,       /* (64  * 64 bits)  */
+	.txfifo = SZ_1K,        /* (128 * 64 bits)  */
+	.ahb_buf_size = SZ_2K,  /* (256 * 64 bits)  */
+	.quirks = 0,
+	.lut_num = 16,
 	.little_endian = true,  /* little-endian    */
 };
 
@@ -544,6 +548,8 @@ static void nxp_fspi_prepare_lut(struct nxp_fspi *f,
 	void __iomem *base = f->iobase;
 	u32 lutval[4] = {};
 	int lutidx = 1, i;
+	u32 lut_offset = (f->devtype_data->lut_num - 1) * 4 * 4;
+	u32 target_lut_reg;
 
 	/* cmd */
 	lutval[0] |= LUT_DEF(0, LUT_CMD, LUT_PAD(op->cmd.buswidth),
@@ -588,8 +594,10 @@ static void nxp_fspi_prepare_lut(struct nxp_fspi *f,
 	fspi_writel(f, FSPI_LCKER_UNLOCK, f->iobase + FSPI_LCKCR);
 
 	/* fill LUT */
-	for (i = 0; i < ARRAY_SIZE(lutval); i++)
-		fspi_writel(f, lutval[i], base + FSPI_LUT_REG(i));
+	for (i = 0; i < ARRAY_SIZE(lutval); i++) {
+		target_lut_reg = FSPI_LUT_BASE + lut_offset + i * 4;
+		fspi_writel(f, lutval[i], base + target_lut_reg);
+	}
 
 	dev_dbg(f->dev, "CMD[%02x] lutval[0:%08x 1:%08x 2:%08x 3:%08x], size: 0x%08x\n",
 		op->cmd.opcode, lutval[0], lutval[1], lutval[2], lutval[3], op->data.nbytes);
@@ -756,8 +764,7 @@ static int nxp_fspi_read_ahb(struct nxp_fspi *f, const struct spi_mem_op *op)
 			iounmap(f->ahb_addr);
 
 		f->memmap_start = start;
-		f->memmap_len = len > NXP_FSPI_MIN_IOMAP ?
-				len : NXP_FSPI_MIN_IOMAP;
+		f->memmap_len = max_t(u32, len, NXP_FSPI_MIN_IOMAP);
 
 		f->ahb_addr = ioremap(f->memmap_phy + f->memmap_start,
 					 f->memmap_len);
@@ -876,7 +883,7 @@ static int nxp_fspi_do_op(struct nxp_fspi *f, const struct spi_mem_op *op)
 	void __iomem *base = f->iobase;
 	int seqnum = 0;
 	int err = 0;
-	u32 reg;
+	u32 reg, seqid_lut;
 
 	reg = fspi_readl(f, base + FSPI_IPRXFCR);
 	/* invalid RXFIFO first */
@@ -892,8 +899,9 @@ static int nxp_fspi_do_op(struct nxp_fspi *f, const struct spi_mem_op *op)
 	 * the LUT at each exec_op() call. And also specify the DATA
 	 * length, since it's has not been specified in the LUT.
 	 */
+	seqid_lut = f->devtype_data->lut_num - 1;
 	fspi_writel(f, op->data.nbytes |
-		 (SEQID_LUT << FSPI_IPCR1_SEQID_SHIFT) |
+		 (seqid_lut << FSPI_IPCR1_SEQID_SHIFT) |
 		 (seqnum << FSPI_IPCR1_SEQNUM_SHIFT),
 		 base + FSPI_IPCR1);
 
@@ -1017,7 +1025,7 @@ static int nxp_fspi_default_setup(struct nxp_fspi *f)
 {
 	void __iomem *base = f->iobase;
 	int ret, i;
-	u32 reg;
+	u32 reg, seqid_lut;
 
 	/* disable and unprepare clock to avoid glitch pass to controller */
 	nxp_fspi_clk_disable_unprep(f);
@@ -1092,11 +1100,17 @@ static int nxp_fspi_default_setup(struct nxp_fspi *f)
 	fspi_writel(f, reg, base + FSPI_FLSHB1CR1);
 	fspi_writel(f, reg, base + FSPI_FLSHB2CR1);
 
+	/*
+	 * The driver only uses one single LUT entry, that is updated on
+	 * each call of exec_op(). Index 0 is preset at boot with a basic
+	 * read operation, so let's use the last entry.
+	 */
+	seqid_lut = f->devtype_data->lut_num - 1;
 	/* AHB Read - Set lut sequence ID for all CS. */
-	fspi_writel(f, SEQID_LUT, base + FSPI_FLSHA1CR2);
-	fspi_writel(f, SEQID_LUT, base + FSPI_FLSHA2CR2);
-	fspi_writel(f, SEQID_LUT, base + FSPI_FLSHB1CR2);
-	fspi_writel(f, SEQID_LUT, base + FSPI_FLSHB2CR2);
+	fspi_writel(f, seqid_lut, base + FSPI_FLSHA1CR2);
+	fspi_writel(f, seqid_lut, base + FSPI_FLSHA2CR2);
+	fspi_writel(f, seqid_lut, base + FSPI_FLSHB1CR2);
+	fspi_writel(f, seqid_lut, base + FSPI_FLSHB2CR2);
 
 	f->selected = -1;
 
@@ -1291,6 +1305,7 @@ static const struct of_device_id nxp_fspi_dt_ids[] = {
 	{ .compatible = "nxp,imx8mp-fspi", .data = (void *)&imx8mm_data, },
 	{ .compatible = "nxp,imx8qxp-fspi", .data = (void *)&imx8qxp_data, },
 	{ .compatible = "nxp,imx8dxl-fspi", .data = (void *)&imx8dxl_data, },
+	{ .compatible = "nxp,imx8ulp-fspi", .data = (void *)&imx8ulp_data, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, nxp_fspi_dt_ids);