Merge 5.7-rc3 into tty-next

We need the tty/serial fixes in here too.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 files changed, 19 insertions, 11 deletions

diff --git a/drivers/soc/fsl/dpio/dpio-service.c b/drivers/soc/fsl/dpio/dpio-service.c
index cd4f6410e8c2..bcdcd3e7d7f1 100644
--- a/drivers/soc/fsl/dpio/dpio-service.c
+++ b/drivers/soc/fsl/dpio/dpio-service.c
@@ -478,12 +478,18 @@ int dpaa2_io_service_enqueue_multiple_desc_fq(struct dpaa2_io *d,
 				const struct dpaa2_fd *fd,
 				int nb)
 {
-	int i;
-	struct qbman_eq_desc ed[32];
+	struct qbman_eq_desc *ed;
+	int i, ret;
+
+	ed = kcalloc(sizeof(struct qbman_eq_desc), 32, GFP_KERNEL);
+	if (!ed)
+		return -ENOMEM;
 
 	d = service_select(d);
-	if (!d)
-		return -ENODEV;
+	if (!d) {
+		ret = -ENODEV;
+		goto out;
+	}
 
 	for (i = 0; i < nb; i++) {
 		qbman_eq_desc_clear(&ed[i]);
@@ -491,7 +497,10 @@ int dpaa2_io_service_enqueue_multiple_desc_fq(struct dpaa2_io *d,
 		qbman_eq_desc_set_fq(&ed[i], fqid[i]);
 	}
 
-	return qbman_swp_enqueue_multiple_desc(d->swp, &ed[0], fd, nb);
+	ret = qbman_swp_enqueue_multiple_desc(d->swp, &ed[0], fd, nb);
+out:
+	kfree(ed);
+	return ret;
 }
 EXPORT_SYMBOL(dpaa2_io_service_enqueue_multiple_desc_fq);
 
diff --git a/drivers/soc/fsl/dpio/qbman-portal.c b/drivers/soc/fsl/dpio/qbman-portal.c
index d1f49caa5b13..804b8ba9bf5c 100644
--- a/drivers/soc/fsl/dpio/qbman-portal.c
+++ b/drivers/soc/fsl/dpio/qbman-portal.c
@@ -753,7 +753,7 @@ int qbman_swp_enqueue_multiple_mem_back(struct qbman_swp *s,
 	if (!s->eqcr.available) {
 		eqcr_ci = s->eqcr.ci;
 		p = s->addr_cena + QBMAN_CENA_SWP_EQCR_CI_MEMBACK;
-		s->eqcr.ci = __raw_readl(p) & full_mask;
+		s->eqcr.ci = *p & full_mask;
 		s->eqcr.available = qm_cyc_diff(s->eqcr.pi_ring_size,
 					eqcr_ci, s->eqcr.ci);
 		if (!s->eqcr.available) {
@@ -823,7 +823,6 @@ int qbman_swp_enqueue_multiple_desc_direct(struct qbman_swp *s,
 	const uint32_t *cl;
 	uint32_t eqcr_ci, eqcr_pi, half_mask, full_mask;
 	int i, num_enqueued = 0;
-	uint64_t addr_cena;
 
 	half_mask = (s->eqcr.pi_ci_mask>>1);
 	full_mask = s->eqcr.pi_ci_mask;
@@ -867,7 +866,6 @@ int qbman_swp_enqueue_multiple_desc_direct(struct qbman_swp *s,
 
 	/* Flush all the cacheline without load/store in between */
 	eqcr_pi = s->eqcr.pi;
-	addr_cena = (uint64_t)s->addr_cena;
 	for (i = 0; i < num_enqueued; i++)
 		eqcr_pi++;
 	s->eqcr.pi = eqcr_pi & full_mask;
@@ -901,7 +899,7 @@ int qbman_swp_enqueue_multiple_desc_mem_back(struct qbman_swp *s,
 	if (!s->eqcr.available) {
 		eqcr_ci = s->eqcr.ci;
 		p = s->addr_cena + QBMAN_CENA_SWP_EQCR_CI_MEMBACK;
-		s->eqcr.ci = __raw_readl(p) & full_mask;
+		s->eqcr.ci = *p & full_mask;
 		s->eqcr.available = qm_cyc_diff(s->eqcr.pi_ring_size,
 					eqcr_ci, s->eqcr.ci);
 		if (!s->eqcr.available)
diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig
index 67aa94b2481b..d515d2cc20ed 100644
--- a/drivers/soc/imx/Kconfig
+++ b/drivers/soc/imx/Kconfig
@@ -21,6 +21,7 @@ config SOC_IMX8M
 	bool "i.MX8M SoC family support"
 	depends on ARCH_MXC || COMPILE_TEST
 	default ARCH_MXC && ARM64
+	select SOC_BUS
 	help
 	  If you say yes here you get support for the NXP i.MX8M family
 	  support, it will provide the SoC info like SoC family,
diff --git a/drivers/soc/xilinx/Kconfig b/drivers/soc/xilinx/Kconfig
index 223f1f9d0922..646512d7276f 100644
--- a/drivers/soc/xilinx/Kconfig
+++ b/drivers/soc/xilinx/Kconfig
@@ -19,7 +19,7 @@ config XILINX_VCU
 
 config ZYNQMP_POWER
 	bool "Enable Xilinx Zynq MPSoC Power Management driver"
-	depends on PM && ARCH_ZYNQMP
+	depends on PM && ZYNQMP_FIRMWARE
 	default y
 	select MAILBOX
 	select ZYNQMP_IPI_MBOX
@@ -35,7 +35,7 @@ config ZYNQMP_POWER
 config ZYNQMP_PM_DOMAINS
 	bool "Enable Zynq MPSoC generic PM domains"
 	default y
-	depends on PM && ARCH_ZYNQMP && ZYNQMP_FIRMWARE
+	depends on PM && ZYNQMP_FIRMWARE
 	select PM_GENERIC_DOMAINS
 	help
 	  Say yes to enable device power management through PM domains