regulator: Merge up v6.8-rc5

There are dependencies on the PWM fixes for some new work on the PWM
driver.

3 files changed, 63 insertions, 4 deletions

diff --git a/drivers/regulator/max5970-regulator.c b/drivers/regulator/max5970-regulator.c
index bc88a40a88d4..830a1c4cd705 100644
--- a/drivers/regulator/max5970-regulator.c
+++ b/drivers/regulator/max5970-regulator.c
@@ -392,7 +392,7 @@ static int max597x_regmap_read_clear(struct regmap *map, unsigned int reg,
 		return ret;
 
 	if (*val)
-		return regmap_write(map, reg, *val);
+		return regmap_write(map, reg, 0);
 
 	return 0;
 }
diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index 698c420e0869..60cfcd741c2a 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -157,7 +157,17 @@ static int pwm_regulator_get_voltage(struct regulator_dev *rdev)
 
 	pwm_get_state(drvdata->pwm, &pstate);
 
+	if (!pstate.enabled) {
+		if (pstate.polarity == PWM_POLARITY_INVERSED)
+			pstate.duty_cycle = pstate.period;
+		else
+			pstate.duty_cycle = 0;
+	}
+
 	voltage = pwm_get_relative_duty_cycle(&pstate, duty_unit);
+	if (voltage < min(max_uV_duty, min_uV_duty) ||
+	    voltage > max(max_uV_duty, min_uV_duty))
+		return -ENOTRECOVERABLE;
 
 	/*
 	 * The dutycycle for min_uV might be greater than the one for max_uV.
@@ -313,6 +323,32 @@ static int pwm_regulator_init_continuous(struct platform_device *pdev,
 	return 0;
 }
 
+static int pwm_regulator_init_boot_on(struct platform_device *pdev,
+				      struct pwm_regulator_data *drvdata,
+				      const struct regulator_init_data *init_data)
+{
+	struct pwm_state pstate;
+
+	if (!init_data->constraints.boot_on || drvdata->enb_gpio)
+		return 0;
+
+	pwm_get_state(drvdata->pwm, &pstate);
+	if (pstate.enabled)
+		return 0;
+
+	/*
+	 * Update the duty cycle so the output does not change
+	 * when the regulator core enables the regulator (and
+	 * thus the PWM channel).
+	 */
+	if (pstate.polarity == PWM_POLARITY_INVERSED)
+		pstate.duty_cycle = pstate.period;
+	else
+		pstate.duty_cycle = 0;
+
+	return pwm_apply_might_sleep(drvdata->pwm, &pstate);
+}
+
 static int pwm_regulator_probe(struct platform_device *pdev)
 {
 	const struct regulator_init_data *init_data;
@@ -372,6 +408,13 @@ static int pwm_regulator_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	ret = pwm_regulator_init_boot_on(pdev, drvdata, init_data);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to apply boot_on settings: %d\n",
+			ret);
+		return ret;
+	}
+
 	regulator = devm_regulator_register(&pdev->dev,
 					    &drvdata->desc, &config);
 	if (IS_ERR(regulator)) {
diff --git a/drivers/regulator/ti-abb-regulator.c b/drivers/regulator/ti-abb-regulator.c
index f48214e2c3b4..04133510e5af 100644
--- a/drivers/regulator/ti-abb-regulator.c
+++ b/drivers/regulator/ti-abb-regulator.c
@@ -726,9 +726,25 @@ static int ti_abb_probe(struct platform_device *pdev)
 			return PTR_ERR(abb->setup_reg);
 	}
 
-	abb->int_base = devm_platform_ioremap_resource_byname(pdev, "int-address");
-	if (IS_ERR(abb->int_base))
-		return PTR_ERR(abb->int_base);
+	pname = "int-address";
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname);
+	if (!res) {
+		dev_err(dev, "Missing '%s' IO resource\n", pname);
+		return -ENODEV;
+	}
+	/*
+	 * The MPU interrupt status register (PRM_IRQSTATUS_MPU) is
+	 * shared between regulator-abb-{ivahd,dspeve,gpu} driver
+	 * instances. Therefore use devm_ioremap() rather than
+	 * devm_platform_ioremap_resource_byname() to avoid busy
+	 * resource region conflicts.
+	 */
+	abb->int_base = devm_ioremap(dev, res->start,
+					     resource_size(res));
+	if (!abb->int_base) {
+		dev_err(dev, "Unable to map '%s'\n", pname);
+		return -ENOMEM;
+	}
 
 	/* Map Optional resources */
 	pname = "efuse-address";