Merge drm/drm-next into drm-intel-next-queued

We need a backmerge to get DP_DPCD_REV_14 before we push other
i915 changes to dinq that could break compilation.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

1 files changed, 0 insertions, 394 deletions

diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c
deleted file mode 100644
index 1b7282e5b494..000000000000
--- a/drivers/pci/dwc/pcie-designware.c
+++ /dev/null
@@ -1,394 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Synopsys DesignWare PCIe host controller driver
- *
- * Copyright (C) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Author: Jingoo Han <jg1.han@samsung.com>
- */
-
-#include <linux/delay.h>
-#include <linux/of.h>
-#include <linux/types.h>
-
-#include "pcie-designware.h"
-
-/* PCIe Port Logic registers */
-#define PLR_OFFSET			0x700
-#define PCIE_PHY_DEBUG_R1		(PLR_OFFSET + 0x2c)
-#define PCIE_PHY_DEBUG_R1_LINK_UP	(0x1 << 4)
-#define PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING	(0x1 << 29)
-
-int dw_pcie_read(void __iomem *addr, int size, u32 *val)
-{
-	if ((uintptr_t)addr & (size - 1)) {
-		*val = 0;
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-	}
-
-	if (size == 4) {
-		*val = readl(addr);
-	} else if (size == 2) {
-		*val = readw(addr);
-	} else if (size == 1) {
-		*val = readb(addr);
-	} else {
-		*val = 0;
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int dw_pcie_write(void __iomem *addr, int size, u32 val)
-{
-	if ((uintptr_t)addr & (size - 1))
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	if (size == 4)
-		writel(val, addr);
-	else if (size == 2)
-		writew(val, addr);
-	else if (size == 1)
-		writeb(val, addr);
-	else
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-u32 __dw_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
-		       size_t size)
-{
-	int ret;
-	u32 val;
-
-	if (pci->ops->read_dbi)
-		return pci->ops->read_dbi(pci, base, reg, size);
-
-	ret = dw_pcie_read(base + reg, size, &val);
-	if (ret)
-		dev_err(pci->dev, "read DBI address failed\n");
-
-	return val;
-}
-
-void __dw_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
-			 size_t size, u32 val)
-{
-	int ret;
-
-	if (pci->ops->write_dbi) {
-		pci->ops->write_dbi(pci, base, reg, size, val);
-		return;
-	}
-
-	ret = dw_pcie_write(base + reg, size, val);
-	if (ret)
-		dev_err(pci->dev, "write DBI address failed\n");
-}
-
-static u32 dw_pcie_readl_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg)
-{
-	u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
-
-	return dw_pcie_readl_dbi(pci, offset + reg);
-}
-
-static void dw_pcie_writel_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg,
-				     u32 val)
-{
-	u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
-
-	dw_pcie_writel_dbi(pci, offset + reg, val);
-}
-
-static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index,
-					     int type, u64 cpu_addr,
-					     u64 pci_addr, u32 size)
-{
-	u32 retries, val;
-
-	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE,
-				 lower_32_bits(cpu_addr));
-	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_BASE,
-				 upper_32_bits(cpu_addr));
-	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LIMIT,
-				 lower_32_bits(cpu_addr + size - 1));
-	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
-				 lower_32_bits(pci_addr));
-	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
-				 upper_32_bits(pci_addr));
-	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1,
-				 type);
-	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
-				 PCIE_ATU_ENABLE);
-
-	/*
-	 * Make sure ATU enable takes effect before any subsequent config
-	 * and I/O accesses.
-	 */
-	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
-		val = dw_pcie_readl_ob_unroll(pci, index,
-					      PCIE_ATU_UNR_REGION_CTRL2);
-		if (val & PCIE_ATU_ENABLE)
-			return;
-
-		usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
-	}
-	dev_err(pci->dev, "outbound iATU is not being enabled\n");
-}
-
-void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
-			       u64 cpu_addr, u64 pci_addr, u32 size)
-{
-	u32 retries, val;
-
-	if (pci->ops->cpu_addr_fixup)
-		cpu_addr = pci->ops->cpu_addr_fixup(pci, cpu_addr);
-
-	if (pci->iatu_unroll_enabled) {
-		dw_pcie_prog_outbound_atu_unroll(pci, index, type, cpu_addr,
-						 pci_addr, size);
-		return;
-	}
-
-	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
-			   PCIE_ATU_REGION_OUTBOUND | index);
-	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_BASE,
-			   lower_32_bits(cpu_addr));
-	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_BASE,
-			   upper_32_bits(cpu_addr));
-	dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
-			   lower_32_bits(cpu_addr + size - 1));
-	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
-			   lower_32_bits(pci_addr));
-	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
-			   upper_32_bits(pci_addr));
-	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
-	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
-
-	/*
-	 * Make sure ATU enable takes effect before any subsequent config
-	 * and I/O accesses.
-	 */
-	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
-		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
-		if (val & PCIE_ATU_ENABLE)
-			return;
-
-		usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
-	}
-	dev_err(pci->dev, "outbound iATU is not being enabled\n");
-}
-
-static u32 dw_pcie_readl_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg)
-{
-	u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index);
-
-	return dw_pcie_readl_dbi(pci, offset + reg);
-}
-
-static void dw_pcie_writel_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg,
-				     u32 val)
-{
-	u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index);
-
-	dw_pcie_writel_dbi(pci, offset + reg, val);
-}
-
-static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index,
-					   int bar, u64 cpu_addr,
-					   enum dw_pcie_as_type as_type)
-{
-	int type;
-	u32 retries, val;
-
-	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
-				 lower_32_bits(cpu_addr));
-	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
-				 upper_32_bits(cpu_addr));
-
-	switch (as_type) {
-	case DW_PCIE_AS_MEM:
-		type = PCIE_ATU_TYPE_MEM;
-		break;
-	case DW_PCIE_AS_IO:
-		type = PCIE_ATU_TYPE_IO;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, type);
-	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
-				 PCIE_ATU_ENABLE |
-				 PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
-
-	/*
-	 * Make sure ATU enable takes effect before any subsequent config
-	 * and I/O accesses.
-	 */
-	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
-		val = dw_pcie_readl_ib_unroll(pci, index,
-					      PCIE_ATU_UNR_REGION_CTRL2);
-		if (val & PCIE_ATU_ENABLE)
-			return 0;
-
-		usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
-	}
-	dev_err(pci->dev, "inbound iATU is not being enabled\n");
-
-	return -EBUSY;
-}
-
-int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
-			     u64 cpu_addr, enum dw_pcie_as_type as_type)
-{
-	int type;
-	u32 retries, val;
-
-	if (pci->iatu_unroll_enabled)
-		return dw_pcie_prog_inbound_atu_unroll(pci, index, bar,
-						       cpu_addr, as_type);
-
-	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, PCIE_ATU_REGION_INBOUND |
-			   index);
-	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET, lower_32_bits(cpu_addr));
-	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET, upper_32_bits(cpu_addr));
-
-	switch (as_type) {
-	case DW_PCIE_AS_MEM:
-		type = PCIE_ATU_TYPE_MEM;
-		break;
-	case DW_PCIE_AS_IO:
-		type = PCIE_ATU_TYPE_IO;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
-	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE
-			   | PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
-
-	/*
-	 * Make sure ATU enable takes effect before any subsequent config
-	 * and I/O accesses.
-	 */
-	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
-		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
-		if (val & PCIE_ATU_ENABLE)
-			return 0;
-
-		usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
-	}
-	dev_err(pci->dev, "inbound iATU is not being enabled\n");
-
-	return -EBUSY;
-}
-
-void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
-			 enum dw_pcie_region_type type)
-{
-	int region;
-
-	switch (type) {
-	case DW_PCIE_REGION_INBOUND:
-		region = PCIE_ATU_REGION_INBOUND;
-		break;
-	case DW_PCIE_REGION_OUTBOUND:
-		region = PCIE_ATU_REGION_OUTBOUND;
-		break;
-	default:
-		return;
-	}
-
-	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, region | index);
-	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, ~PCIE_ATU_ENABLE);
-}
-
-int dw_pcie_wait_for_link(struct dw_pcie *pci)
-{
-	int retries;
-
-	/* check if the link is up or not */
-	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
-		if (dw_pcie_link_up(pci)) {
-			dev_info(pci->dev, "link up\n");
-			return 0;
-		}
-		usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
-	}
-
-	dev_err(pci->dev, "phy link never came up\n");
-
-	return -ETIMEDOUT;
-}
-
-int dw_pcie_link_up(struct dw_pcie *pci)
-{
-	u32 val;
-
-	if (pci->ops->link_up)
-		return pci->ops->link_up(pci);
-
-	val = readl(pci->dbi_base + PCIE_PHY_DEBUG_R1);
-	return ((val & PCIE_PHY_DEBUG_R1_LINK_UP) &&
-		(!(val & PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING)));
-}
-
-void dw_pcie_setup(struct dw_pcie *pci)
-{
-	int ret;
-	u32 val;
-	u32 lanes;
-	struct device *dev = pci->dev;
-	struct device_node *np = dev->of_node;
-
-	ret = of_property_read_u32(np, "num-lanes", &lanes);
-	if (ret)
-		lanes = 0;
-
-	/* set the number of lanes */
-	val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL);
-	val &= ~PORT_LINK_MODE_MASK;
-	switch (lanes) {
-	case 1:
-		val |= PORT_LINK_MODE_1_LANES;
-		break;
-	case 2:
-		val |= PORT_LINK_MODE_2_LANES;
-		break;
-	case 4:
-		val |= PORT_LINK_MODE_4_LANES;
-		break;
-	case 8:
-		val |= PORT_LINK_MODE_8_LANES;
-		break;
-	default:
-		dev_err(pci->dev, "num-lanes %u: invalid value\n", lanes);
-		return;
-	}
-	dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val);
-
-	/* set link width speed control register */
-	val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
-	val &= ~PORT_LOGIC_LINK_WIDTH_MASK;
-	switch (lanes) {
-	case 1:
-		val |= PORT_LOGIC_LINK_WIDTH_1_LANES;
-		break;
-	case 2:
-		val |= PORT_LOGIC_LINK_WIDTH_2_LANES;
-		break;
-	case 4:
-		val |= PORT_LOGIC_LINK_WIDTH_4_LANES;
-		break;
-	case 8:
-		val |= PORT_LOGIC_LINK_WIDTH_8_LANES;
-		break;
-	}
-	dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
-}