Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

1 files changed, 257 insertions, 162 deletions

diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index f33370b75628..2d93d0c4f10d 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -489,7 +489,10 @@ struct hv_pcibus_device {
 	struct fwnode_handle *fwnode;
 	/* Protocol version negotiated with the host */
 	enum pci_protocol_version_t protocol_version;
+
+	struct mutex state_lock;
 	enum hv_pcibus_state state;
+
 	struct hv_device *hdev;
 	resource_size_t low_mmio_space;
 	resource_size_t high_mmio_space;
@@ -508,19 +511,11 @@ struct hv_pcibus_device {
 	struct msi_domain_info msi_info;
 	struct irq_domain *irq_domain;
 
-	spinlock_t retarget_msi_interrupt_lock;
-
 	struct workqueue_struct *wq;
 
 	/* Highest slot of child device with resources allocated */
 	int wslot_res_allocated;
-
-	/* hypercall arg, must not cross page boundary */
-	struct hv_retarget_device_interrupt retarget_msi_interrupt_params;
-
-	/*
-	 * Don't put anything here: retarget_msi_interrupt_params must be last
-	 */
+	bool use_calls; /* Use hypercalls to access mmio cfg space */
 };
 
 /*
@@ -553,19 +548,10 @@ struct hv_dr_state {
 	struct hv_pcidev_description func[];
 };
 
-enum hv_pcichild_state {
-	hv_pcichild_init = 0,
-	hv_pcichild_requirements,
-	hv_pcichild_resourced,
-	hv_pcichild_ejecting,
-	hv_pcichild_maximum
-};
-
 struct hv_pci_dev {
 	/* List protected by pci_rescan_remove_lock */
 	struct list_head list_entry;
 	refcount_t refs;
-	enum hv_pcichild_state state;
 	struct pci_slot *pci_slot;
 	struct hv_pcidev_description desc;
 	bool reported_missing;
@@ -643,10 +629,15 @@ static void hv_arch_irq_unmask(struct irq_data *data)
 	pbus = pdev->bus;
 	hbus = container_of(pbus->sysdata, struct hv_pcibus_device, sysdata);
 	int_desc = data->chip_data;
+	if (!int_desc) {
+		dev_warn(&hbus->hdev->device, "%s() can not unmask irq %u\n",
+			 __func__, data->irq);
+		return;
+	}
 
-	spin_lock_irqsave(&hbus->retarget_msi_interrupt_lock, flags);
+	local_irq_save(flags);
 
-	params = &hbus->retarget_msi_interrupt_params;
+	params = *this_cpu_ptr(hyperv_pcpu_input_arg);
 	memset(params, 0, sizeof(*params));
 	params->partition_id = HV_PARTITION_ID_SELF;
 	params->int_entry.source = HV_INTERRUPT_SOURCE_MSI;
@@ -679,7 +670,7 @@ static void hv_arch_irq_unmask(struct irq_data *data)
 
 		if (!alloc_cpumask_var(&tmp, GFP_ATOMIC)) {
 			res = 1;
-			goto exit_unlock;
+			goto out;
 		}
 
 		cpumask_and(tmp, dest, cpu_online_mask);
@@ -688,7 +679,7 @@ static void hv_arch_irq_unmask(struct irq_data *data)
 
 		if (nr_bank <= 0) {
 			res = 1;
-			goto exit_unlock;
+			goto out;
 		}
 
 		/*
@@ -707,8 +698,8 @@ static void hv_arch_irq_unmask(struct irq_data *data)
 	res = hv_do_hypercall(HVCALL_RETARGET_INTERRUPT | (var_size << 17),
 			      params, NULL);
 
-exit_unlock:
-	spin_unlock_irqrestore(&hbus->retarget_msi_interrupt_lock, flags);
+out:
+	local_irq_restore(flags);
 
 	/*
 	 * During hibernation, when a CPU is offlined, the kernel tries
@@ -1041,6 +1032,70 @@ static int wslot_to_devfn(u32 wslot)
 	return PCI_DEVFN(slot_no.bits.dev, slot_no.bits.func);
 }
 
+static void hv_pci_read_mmio(struct device *dev, phys_addr_t gpa, int size, u32 *val)
+{
+	struct hv_mmio_read_input *in;
+	struct hv_mmio_read_output *out;
+	u64 ret;
+
+	/*
+	 * Must be called with interrupts disabled so it is safe
+	 * to use the per-cpu input argument page.  Use it for
+	 * both input and output.
+	 */
+	in = *this_cpu_ptr(hyperv_pcpu_input_arg);
+	out = *this_cpu_ptr(hyperv_pcpu_input_arg) + sizeof(*in);
+	in->gpa = gpa;
+	in->size = size;
+
+	ret = hv_do_hypercall(HVCALL_MMIO_READ, in, out);
+	if (hv_result_success(ret)) {
+		switch (size) {
+		case 1:
+			*val = *(u8 *)(out->data);
+			break;
+		case 2:
+			*val = *(u16 *)(out->data);
+			break;
+		default:
+			*val = *(u32 *)(out->data);
+			break;
+		}
+	} else
+		dev_err(dev, "MMIO read hypercall error %llx addr %llx size %d\n",
+				ret, gpa, size);
+}
+
+static void hv_pci_write_mmio(struct device *dev, phys_addr_t gpa, int size, u32 val)
+{
+	struct hv_mmio_write_input *in;
+	u64 ret;
+
+	/*
+	 * Must be called with interrupts disabled so it is safe
+	 * to use the per-cpu input argument memory.
+	 */
+	in = *this_cpu_ptr(hyperv_pcpu_input_arg);
+	in->gpa = gpa;
+	in->size = size;
+	switch (size) {
+	case 1:
+		*(u8 *)(in->data) = val;
+		break;
+	case 2:
+		*(u16 *)(in->data) = val;
+		break;
+	default:
+		*(u32 *)(in->data) = val;
+		break;
+	}
+
+	ret = hv_do_hypercall(HVCALL_MMIO_WRITE, in, NULL);
+	if (!hv_result_success(ret))
+		dev_err(dev, "MMIO write hypercall error %llx addr %llx size %d\n",
+				ret, gpa, size);
+}
+
 /*
  * PCI Configuration Space for these root PCI buses is implemented as a pair
  * of pages in memory-mapped I/O space.  Writing to the first page chooses
@@ -1059,8 +1114,10 @@ static int wslot_to_devfn(u32 wslot)
 static void _hv_pcifront_read_config(struct hv_pci_dev *hpdev, int where,
 				     int size, u32 *val)
 {
+	struct hv_pcibus_device *hbus = hpdev->hbus;
+	struct device *dev = &hbus->hdev->device;
+	int offset = where + CFG_PAGE_OFFSET;
 	unsigned long flags;
-	void __iomem *addr = hpdev->hbus->cfg_addr + CFG_PAGE_OFFSET + where;
 
 	/*
 	 * If the attempt is to read the IDs or the ROM BAR, simulate that.
@@ -1088,56 +1145,79 @@ static void _hv_pcifront_read_config(struct hv_pci_dev *hpdev, int where,
 		 */
 		*val = 0;
 	} else if (where + size <= CFG_PAGE_SIZE) {
-		spin_lock_irqsave(&hpdev->hbus->config_lock, flags);
-		/* Choose the function to be read. (See comment above) */
-		writel(hpdev->desc.win_slot.slot, hpdev->hbus->cfg_addr);
-		/* Make sure the function was chosen before we start reading. */
-		mb();
-		/* Read from that function's config space. */
-		switch (size) {
-		case 1:
-			*val = readb(addr);
-			break;
-		case 2:
-			*val = readw(addr);
-			break;
-		default:
-			*val = readl(addr);
-			break;
+
+		spin_lock_irqsave(&hbus->config_lock, flags);
+		if (hbus->use_calls) {
+			phys_addr_t addr = hbus->mem_config->start + offset;
+
+			hv_pci_write_mmio(dev, hbus->mem_config->start, 4,
+						hpdev->desc.win_slot.slot);
+			hv_pci_read_mmio(dev, addr, size, val);
+		} else {
+			void __iomem *addr = hbus->cfg_addr + offset;
+
+			/* Choose the function to be read. (See comment above) */
+			writel(hpdev->desc.win_slot.slot, hbus->cfg_addr);
+			/* Make sure the function was chosen before reading. */
+			mb();
+			/* Read from that function's config space. */
+			switch (size) {
+			case 1:
+				*val = readb(addr);
+				break;
+			case 2:
+				*val = readw(addr);
+				break;
+			default:
+				*val = readl(addr);
+				break;
+			}
+			/*
+			 * Make sure the read was done before we release the
+			 * spinlock allowing consecutive reads/writes.
+			 */
+			mb();
 		}
-		/*
-		 * Make sure the read was done before we release the spinlock
-		 * allowing consecutive reads/writes.
-		 */
-		mb();
-		spin_unlock_irqrestore(&hpdev->hbus->config_lock, flags);
+		spin_unlock_irqrestore(&hbus->config_lock, flags);
 	} else {
-		dev_err(&hpdev->hbus->hdev->device,
-			"Attempt to read beyond a function's config space.\n");
+		dev_err(dev, "Attempt to read beyond a function's config space.\n");
 	}
 }
 
 static u16 hv_pcifront_get_vendor_id(struct hv_pci_dev *hpdev)
 {
+	struct hv_pcibus_device *hbus = hpdev->hbus;
+	struct device *dev = &hbus->hdev->device;
+	u32 val;
 	u16 ret;
 	unsigned long flags;
-	void __iomem *addr = hpdev->hbus->cfg_addr + CFG_PAGE_OFFSET +
-			     PCI_VENDOR_ID;
 
-	spin_lock_irqsave(&hpdev->hbus->config_lock, flags);
+	spin_lock_irqsave(&hbus->config_lock, flags);
 
-	/* Choose the function to be read. (See comment above) */
-	writel(hpdev->desc.win_slot.slot, hpdev->hbus->cfg_addr);
-	/* Make sure the function was chosen before we start reading. */
-	mb();
-	/* Read from that function's config space. */
-	ret = readw(addr);
-	/*
-	 * mb() is not required here, because the spin_unlock_irqrestore()
-	 * is a barrier.
-	 */
+	if (hbus->use_calls) {
+		phys_addr_t addr = hbus->mem_config->start +
+					 CFG_PAGE_OFFSET + PCI_VENDOR_ID;
+
+		hv_pci_write_mmio(dev, hbus->mem_config->start, 4,
+					hpdev->desc.win_slot.slot);
+		hv_pci_read_mmio(dev, addr, 2, &val);
+		ret = val;  /* Truncates to 16 bits */
+	} else {
+		void __iomem *addr = hbus->cfg_addr + CFG_PAGE_OFFSET +
+					     PCI_VENDOR_ID;
+		/* Choose the function to be read. (See comment above) */
+		writel(hpdev->desc.win_slot.slot, hbus->cfg_addr);
+		/* Make sure the function was chosen before we start reading. */
+		mb();
+		/* Read from that function's config space. */
+		ret = readw(addr);
+		/*
+		 * mb() is not required here, because the
+		 * spin_unlock_irqrestore() is a barrier.
+		 */
+	}
 
-	spin_unlock_irqrestore(&hpdev->hbus->config_lock, flags);
+	spin_unlock_irqrestore(&hbus->config_lock, flags);
 
 	return ret;
 }
@@ -1152,39 +1232,51 @@ static u16 hv_pcifront_get_vendor_id(struct hv_pci_dev *hpdev)
 static void _hv_pcifront_write_config(struct hv_pci_dev *hpdev, int where,
 				      int size, u32 val)
 {
+	struct hv_pcibus_device *hbus = hpdev->hbus;
+	struct device *dev = &hbus->hdev->device;
+	int offset = where + CFG_PAGE_OFFSET;
 	unsigned long flags;
-	void __iomem *addr = hpdev->hbus->cfg_addr + CFG_PAGE_OFFSET + where;
 
 	if (where >= PCI_SUBSYSTEM_VENDOR_ID &&
 	    where + size <= PCI_CAPABILITY_LIST) {
 		/* SSIDs and ROM BARs are read-only */
 	} else if (where >= PCI_COMMAND && where + size <= CFG_PAGE_SIZE) {
-		spin_lock_irqsave(&hpdev->hbus->config_lock, flags);
-		/* Choose the function to be written. (See comment above) */
-		writel(hpdev->desc.win_slot.slot, hpdev->hbus->cfg_addr);
-		/* Make sure the function was chosen before we start writing. */
-		wmb();
-		/* Write to that function's config space. */
-		switch (size) {
-		case 1:
-			writeb(val, addr);
-			break;
-		case 2:
-			writew(val, addr);
-			break;
-		default:
-			writel(val, addr);
-			break;
+		spin_lock_irqsave(&hbus->config_lock, flags);
+
+		if (hbus->use_calls) {
+			phys_addr_t addr = hbus->mem_config->start + offset;
+
+			hv_pci_write_mmio(dev, hbus->mem_config->start, 4,
+						hpdev->desc.win_slot.slot);
+			hv_pci_write_mmio(dev, addr, size, val);
+		} else {
+			void __iomem *addr = hbus->cfg_addr + offset;
+
+			/* Choose the function to write. (See comment above) */
+			writel(hpdev->desc.win_slot.slot, hbus->cfg_addr);
+			/* Make sure the function was chosen before writing. */
+			wmb();
+			/* Write to that function's config space. */
+			switch (size) {
+			case 1:
+				writeb(val, addr);
+				break;
+			case 2:
+				writew(val, addr);
+				break;
+			default:
+				writel(val, addr);
+				break;
+			}
+			/*
+			 * Make sure the write was done before we release the
+			 * spinlock allowing consecutive reads/writes.
+			 */
+			mb();
 		}
-		/*
-		 * Make sure the write was done before we release the spinlock
-		 * allowing consecutive reads/writes.
-		 */
-		mb();
-		spin_unlock_irqrestore(&hpdev->hbus->config_lock, flags);
+		spin_unlock_irqrestore(&hbus->config_lock, flags);
 	} else {
-		dev_err(&hpdev->hbus->hdev->device,
-			"Attempt to write beyond a function's config space.\n");
+		dev_err(dev, "Attempt to write beyond a function's config space.\n");
 	}
 }
 
@@ -1911,12 +2003,6 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 		hv_pci_onchannelcallback(hbus);
 		spin_unlock_irqrestore(&channel->sched_lock, flags);
 
-		if (hpdev->state == hv_pcichild_ejecting) {
-			dev_err_once(&hbus->hdev->device,
-				     "the device is being ejected\n");
-			goto enable_tasklet;
-		}
-
 		udelay(100);
 	}
 
@@ -2522,6 +2608,8 @@ static void pci_devices_present_work(struct work_struct *work)
 	if (!dr)
 		return;
 
+	mutex_lock(&hbus->state_lock);
+
 	/* First, mark all existing children as reported missing. */
 	spin_lock_irqsave(&hbus->device_list_lock, flags);
 	list_for_each_entry(hpdev, &hbus->children, list_entry) {
@@ -2603,6 +2691,8 @@ static void pci_devices_present_work(struct work_struct *work)
 		break;
 	}
 
+	mutex_unlock(&hbus->state_lock);
+
 	kfree(dr);
 }
 
@@ -2751,7 +2841,7 @@ static void hv_eject_device_work(struct work_struct *work)
 	hpdev = container_of(work, struct hv_pci_dev, wrk);
 	hbus = hpdev->hbus;
 
-	WARN_ON(hpdev->state != hv_pcichild_ejecting);
+	mutex_lock(&hbus->state_lock);
 
 	/*
 	 * Ejection can come before or after the PCI bus has been set up, so
@@ -2789,6 +2879,8 @@ static void hv_eject_device_work(struct work_struct *work)
 	put_pcichild(hpdev);
 	put_pcichild(hpdev);
 	/* hpdev has been freed. Do not use it any more. */
+
+	mutex_unlock(&hbus->state_lock);
 }
 
 /**
@@ -2809,7 +2901,6 @@ static void hv_pci_eject_device(struct hv_pci_dev *hpdev)
 		return;
 	}
 
-	hpdev->state = hv_pcichild_ejecting;
 	get_pcichild(hpdev);
 	INIT_WORK(&hpdev->wrk, hv_eject_device_work);
 	queue_work(hbus->wq, &hpdev->wrk);
@@ -3238,8 +3329,10 @@ static int hv_pci_enter_d0(struct hv_device *hdev)
 	struct pci_bus_d0_entry *d0_entry;
 	struct hv_pci_compl comp_pkt;
 	struct pci_packet *pkt;
+	bool retry = true;
 	int ret;
 
+enter_d0_retry:
 	/*
 	 * Tell the host that the bus is ready to use, and moved into the
 	 * powered-on state.  This includes telling the host which region
@@ -3266,6 +3359,38 @@ static int hv_pci_enter_d0(struct hv_device *hdev)
 	if (ret)
 		goto exit;
 
+	/*
+	 * In certain case (Kdump) the pci device of interest was
+	 * not cleanly shut down and resource is still held on host
+	 * side, the host could return invalid device status.
+	 * We need to explicitly request host to release the resource
+	 * and try to enter D0 again.
+	 */
+	if (comp_pkt.completion_status < 0 && retry) {
+		retry = false;
+
+		dev_err(&hdev->device, "Retrying D0 Entry\n");
+
+		/*
+		 * Hv_pci_bus_exit() calls hv_send_resource_released()
+		 * to free up resources of its child devices.
+		 * In the kdump kernel we need to set the
+		 * wslot_res_allocated to 255 so it scans all child
+		 * devices to release resources allocated in the
+		 * normal kernel before panic happened.
+		 */
+		hbus->wslot_res_allocated = 255;
+
+		ret = hv_pci_bus_exit(hdev, true);
+
+		if (ret == 0) {
+			kfree(pkt);
+			goto enter_d0_retry;
+		}
+		dev_err(&hdev->device,
+			"Retrying D0 failed with ret %d\n", ret);
+	}
+
 	if (comp_pkt.completion_status < 0) {
 		dev_err(&hdev->device,
 			"PCI Pass-through VSP failed D0 Entry with status %x\n",
@@ -3308,6 +3433,24 @@ static int hv_pci_query_relations(struct hv_device *hdev)
 	if (!ret)
 		ret = wait_for_response(hdev, &comp);
 
+	/*
+	 * In the case of fast device addition/removal, it's possible that
+	 * vmbus_sendpacket() or wait_for_response() returns -ENODEV but we
+	 * already got a PCI_BUS_RELATIONS* message from the host and the
+	 * channel callback already scheduled a work to hbus->wq, which can be
+	 * running pci_devices_present_work() -> survey_child_resources() ->
+	 * complete(&hbus->survey_event), even after hv_pci_query_relations()
+	 * exits and the stack variable 'comp' is no longer valid; as a result,
+	 * a hang or a page fault may happen when the complete() calls
+	 * raw_spin_lock_irqsave(). Flush hbus->wq before we exit from
+	 * hv_pci_query_relations() to avoid the issues. Note: if 'ret' is
+	 * -ENODEV, there can't be any more work item scheduled to hbus->wq
+	 * after the flush_workqueue(): see vmbus_onoffer_rescind() ->
+	 * vmbus_reset_channel_cb(), vmbus_rescind_cleanup() ->
+	 * channel->rescind = true.
+	 */
+	flush_workqueue(hbus->wq);
+
 	return ret;
 }
 
@@ -3493,42 +3636,18 @@ static int hv_pci_probe(struct hv_device *hdev,
 	struct hv_pcibus_device *hbus;
 	u16 dom_req, dom;
 	char *name;
-	bool enter_d0_retry = true;
 	int ret;
 
-	/*
-	 * hv_pcibus_device contains the hypercall arguments for retargeting in
-	 * hv_irq_unmask(). Those must not cross a page boundary.
-	 */
-	BUILD_BUG_ON(sizeof(*hbus) > HV_HYP_PAGE_SIZE);
-
 	bridge = devm_pci_alloc_host_bridge(&hdev->device, 0);
 	if (!bridge)
 		return -ENOMEM;
 
-	/*
-	 * With the recent 59bb47985c1d ("mm, sl[aou]b: guarantee natural
-	 * alignment for kmalloc(power-of-two)"), kzalloc() is able to allocate
-	 * a 4KB buffer that is guaranteed to be 4KB-aligned. Here the size and
-	 * alignment of hbus is important because hbus's field
-	 * retarget_msi_interrupt_params must not cross a 4KB page boundary.
-	 *
-	 * Here we prefer kzalloc to get_zeroed_page(), because a buffer
-	 * allocated by the latter is not tracked and scanned by kmemleak, and
-	 * hence kmemleak reports the pointer contained in the hbus buffer
-	 * (i.e. the hpdev struct, which is created in new_pcichild_device() and
-	 * is tracked by hbus->children) as memory leak (false positive).
-	 *
-	 * If the kernel doesn't have 59bb47985c1d, get_zeroed_page() *must* be
-	 * used to allocate the hbus buffer and we can avoid the kmemleak false
-	 * positive by using kmemleak_alloc() and kmemleak_free() to ask
-	 * kmemleak to track and scan the hbus buffer.
-	 */
-	hbus = kzalloc(HV_HYP_PAGE_SIZE, GFP_KERNEL);
+	hbus = kzalloc(sizeof(*hbus), GFP_KERNEL);
 	if (!hbus)
 		return -ENOMEM;
 
 	hbus->bridge = bridge;
+	mutex_init(&hbus->state_lock);
 	hbus->state = hv_pcibus_init;
 	hbus->wslot_res_allocated = -1;
 
@@ -3563,6 +3682,7 @@ static int hv_pci_probe(struct hv_device *hdev,
 	hbus->bridge->domain_nr = dom;
 #ifdef CONFIG_X86
 	hbus->sysdata.domain = dom;
+	hbus->use_calls = !!(ms_hyperv.hints & HV_X64_USE_MMIO_HYPERCALLS);
 #elif defined(CONFIG_ARM64)
 	/*
 	 * Set the PCI bus parent to be the corresponding VMbus
@@ -3572,6 +3692,7 @@ static int hv_pci_probe(struct hv_device *hdev,
 	 * information to devices created on the bus.
 	 */
 	hbus->sysdata.parent = hdev->device.parent;
+	hbus->use_calls = false;
 #endif
 
 	hbus->hdev = hdev;
@@ -3579,7 +3700,6 @@ static int hv_pci_probe(struct hv_device *hdev,
 	INIT_LIST_HEAD(&hbus->dr_list);
 	spin_lock_init(&hbus->config_lock);
 	spin_lock_init(&hbus->device_list_lock);
-	spin_lock_init(&hbus->retarget_msi_interrupt_lock);
 	hbus->wq = alloc_ordered_workqueue("hv_pci_%x", 0,
 					   hbus->bridge->domain_nr);
 	if (!hbus->wq) {
@@ -3633,49 +3753,15 @@ static int hv_pci_probe(struct hv_device *hdev,
 	if (ret)
 		goto free_fwnode;
 
-retry:
 	ret = hv_pci_query_relations(hdev);
 	if (ret)
 		goto free_irq_domain;
 
-	ret = hv_pci_enter_d0(hdev);
-	/*
-	 * In certain case (Kdump) the pci device of interest was
-	 * not cleanly shut down and resource is still held on host
-	 * side, the host could return invalid device status.
-	 * We need to explicitly request host to release the resource
-	 * and try to enter D0 again.
-	 * Since the hv_pci_bus_exit() call releases structures
-	 * of all its child devices, we need to start the retry from
-	 * hv_pci_query_relations() call, requesting host to send
-	 * the synchronous child device relations message before this
-	 * information is needed in hv_send_resources_allocated()
-	 * call later.
-	 */
-	if (ret == -EPROTO && enter_d0_retry) {
-		enter_d0_retry = false;
-
-		dev_err(&hdev->device, "Retrying D0 Entry\n");
-
-		/*
-		 * Hv_pci_bus_exit() calls hv_send_resources_released()
-		 * to free up resources of its child devices.
-		 * In the kdump kernel we need to set the
-		 * wslot_res_allocated to 255 so it scans all child
-		 * devices to release resources allocated in the
-		 * normal kernel before panic happened.
-		 */
-		hbus->wslot_res_allocated = 255;
-		ret = hv_pci_bus_exit(hdev, true);
+	mutex_lock(&hbus->state_lock);
 
-		if (ret == 0)
-			goto retry;
-
-		dev_err(&hdev->device,
-			"Retrying D0 failed with ret %d\n", ret);
-	}
+	ret = hv_pci_enter_d0(hdev);
 	if (ret)
-		goto free_irq_domain;
+		goto release_state_lock;
 
 	ret = hv_pci_allocate_bridge_windows(hbus);
 	if (ret)
@@ -3693,12 +3779,15 @@ retry:
 	if (ret)
 		goto free_windows;
 
+	mutex_unlock(&hbus->state_lock);
 	return 0;
 
 free_windows:
 	hv_pci_free_bridge_windows(hbus);
 exit_d0:
 	(void) hv_pci_bus_exit(hdev, true);
+release_state_lock:
+	mutex_unlock(&hbus->state_lock);
 free_irq_domain:
 	irq_domain_remove(hbus->irq_domain);
 free_fwnode:
@@ -3948,20 +4037,26 @@ static int hv_pci_resume(struct hv_device *hdev)
 	if (ret)
 		goto out;
 
+	mutex_lock(&hbus->state_lock);
+
 	ret = hv_pci_enter_d0(hdev);
 	if (ret)
-		goto out;
+		goto release_state_lock;
 
 	ret = hv_send_resources_allocated(hdev);
 	if (ret)
-		goto out;
+		goto release_state_lock;
 
 	prepopulate_bars(hbus);
 
 	hv_pci_restore_msi_state(hbus);
 
 	hbus->state = hv_pcibus_installed;
+	mutex_unlock(&hbus->state_lock);
 	return 0;
+
+release_state_lock:
+	mutex_unlock(&hbus->state_lock);
 out:
 	vmbus_close(hdev->channel);
 	return ret;