diff options
| author | Christian Marangi <ansuelsmth@gmail.com> | 2022-07-09 00:27:43 +0200 |
|---|---|---|
| committer | Bjorn Helgaas <bhelgaas@google.com> | 2022-07-13 14:53:02 -0500 |
| commit | 38f897ae3d44900f627cad708a15db498ce2ca31 (patch) | |
| tree | 966f142f5afa762fe820b6178a271945b203ae43 /drivers/pci/controller/dwc/pcie-qcom.c | |
| parent | 553d12b20c10953617cc195f9e447a177c776f9d (diff) | |
PCI: qcom: Set up rev 2.1.0 PARF_PHY before enabling clocks
We currently enable clocks BEFORE we write to PARF_PHY_CTRL reg to enable
clocks and resets. This causes the driver to never set to a ready state
with the error 'Phy link never came up'.
This is caused by the PHY clock getting enabled before setting the required
bits in the PARF regs.
A workaround for this was set but with this new discovery we can drop
the workaround and use a proper solution to the problem by just enabling
the clock only AFTER the PARF_PHY_CTRL bit is set.
This correctly sets up the PCIe link and makes it usable even when a
bootloader leaves the PCIe link in an undefined state.
Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
Link: https://lore.kernel.org/r/20220708222743.27019-1-ansuelsmth@gmail.com
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Diffstat (limited to 'drivers/pci/controller/dwc/pcie-qcom.c')
| -rw-r--r-- | drivers/pci/controller/dwc/pcie-qcom.c | 10 |
1 files changed, 4 insertions, 6 deletions
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 2ea13750b492..da13a66ced14 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -337,8 +337,6 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie) reset_control_assert(res->ext_reset); reset_control_assert(res->phy_reset); - writel(1, pcie->parf + PCIE20_PARF_PHY_CTRL); - ret = regulator_bulk_enable(ARRAY_SIZE(res->supplies), res->supplies); if (ret < 0) { dev_err(dev, "cannot enable regulators\n"); @@ -381,15 +379,15 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie) goto err_deassert_axi; } - ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); - if (ret) - goto err_clks; - /* enable PCIe clocks and resets */ val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); val &= ~BIT(0); writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); + ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); + if (ret) + goto err_clks; + if (of_device_is_compatible(node, "qcom,pcie-ipq8064") || of_device_is_compatible(node, "qcom,pcie-ipq8064-v2")) { writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) | |