diff options
| author | Shashank Babu Chinta Venkata <quic_schintav@quicinc.com> | 2024-09-11 20:56:28 +0530 |
|---|---|---|
| committer | Krzysztof Wilczyński <kwilczynski@kernel.org> | 2024-09-13 14:44:57 +0000 |
| commit | d45736b5984954da71292d858f277bac9c70cd2e (patch) | |
| tree | 0fc202a917dc949a0b645ee662f57a2423d2add7 /drivers/pci/controller/dwc/pcie-qcom-ep.c | |
| parent | 19a69cbd9d436fe503e5cb6dade76fe371244d4f (diff) | |
PCI: qcom: Add equalization settings for 16.0 GT/s
During high data transmission rates such as 16.0 GT/s, there is an
increased risk of signal loss due to poor channel quality and
interference. This can impact receiver's ability to capture signals
accurately.
Hence, as signal compensation is achieved through appropriate lane
equalization, apply lane equalization settings at both transmitter
and receiver which results in an increase in the PCIe signal strength.
While at it, modify the pcie-tegra194 driver to make use of the
common GEN3_EQ_CONTROL_OFF definitions in pcie-designware.h.
Link: https://lore.kernel.org/linux-pci/20240911-pci-qcom-gen4-stability-v7-3-743f5c1fd027@linaro.org
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Shashank Babu Chinta Venkata <quic_schintav@quicinc.com>
[mani: dropped the code refactoring and minor changes]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Diffstat (limited to 'drivers/pci/controller/dwc/pcie-qcom-ep.c')
| -rw-r--r-- | drivers/pci/controller/dwc/pcie-qcom-ep.c | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c index 3c1b695638f3..310d52393392 100644 --- a/drivers/pci/controller/dwc/pcie-qcom-ep.c +++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c @@ -25,6 +25,7 @@ #include "../../pci.h" #include "pcie-designware.h" +#include "pcie-qcom-common.h" /* PARF registers */ #define PARF_SYS_CTRL 0x00 @@ -486,6 +487,9 @@ static int qcom_pcie_perst_deassert(struct dw_pcie *pci) goto err_disable_resources; } + if (pcie_link_speed[pci->max_link_speed] == PCIE_SPEED_16_0GT) + qcom_pcie_common_set_16gt_equalization(pci); + /* * The physical address of the MMIO region which is exposed as the BAR * should be written to MHI BASE registers. |