diff options
| author | Shashank Babu Chinta Venkata <quic_schintav@quicinc.com> | 2024-09-11 20:56:28 +0530 |
|---|---|---|
| committer | Krzysztof Wilczyński <kwilczynski@kernel.org> | 2024-09-13 14:44:57 +0000 |
| commit | d45736b5984954da71292d858f277bac9c70cd2e (patch) | |
| tree | 0fc202a917dc949a0b645ee662f57a2423d2add7 /drivers/pci/controller/dwc/pcie-designware.h | |
| parent | 19a69cbd9d436fe503e5cb6dade76fe371244d4f (diff) | |
PCI: qcom: Add equalization settings for 16.0 GT/s
During high data transmission rates such as 16.0 GT/s, there is an
increased risk of signal loss due to poor channel quality and
interference. This can impact receiver's ability to capture signals
accurately.
Hence, as signal compensation is achieved through appropriate lane
equalization, apply lane equalization settings at both transmitter
and receiver which results in an increase in the PCIe signal strength.
While at it, modify the pcie-tegra194 driver to make use of the
common GEN3_EQ_CONTROL_OFF definitions in pcie-designware.h.
Link: https://lore.kernel.org/linux-pci/20240911-pci-qcom-gen4-stability-v7-3-743f5c1fd027@linaro.org
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Shashank Babu Chinta Venkata <quic_schintav@quicinc.com>
[mani: dropped the code refactoring and minor changes]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Diffstat (limited to 'drivers/pci/controller/dwc/pcie-designware.h')
| -rw-r--r-- | drivers/pci/controller/dwc/pcie-designware.h | 13 |
1 files changed, 13 insertions, 0 deletions
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h index 1a1769244e83..67cc2677ab2e 100644 --- a/drivers/pci/controller/dwc/pcie-designware.h +++ b/drivers/pci/controller/dwc/pcie-designware.h @@ -125,6 +125,19 @@ #define GEN3_RELATED_OFF_GEN3_EQ_DISABLE BIT(16) #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT 24 #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK GENMASK(25, 24) +#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_16_0GT 0x1 + +#define GEN3_EQ_CONTROL_OFF 0x8A8 +#define GEN3_EQ_CONTROL_OFF_FB_MODE GENMASK(3, 0) +#define GEN3_EQ_CONTROL_OFF_PHASE23_EXIT_MODE BIT(4) +#define GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC GENMASK(23, 8) +#define GEN3_EQ_CONTROL_OFF_FOM_INC_INITIAL_EVAL BIT(24) + +#define GEN3_EQ_FB_MODE_DIR_CHANGE_OFF 0x8AC +#define GEN3_EQ_FMDC_T_MIN_PHASE23 GENMASK(4, 0) +#define GEN3_EQ_FMDC_N_EVALS GENMASK(9, 5) +#define GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA GENMASK(13, 10) +#define GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA GENMASK(17, 14) #define PCIE_PORT_MULTI_LANE_CTRL 0x8C0 #define PORT_MLTI_UPCFG_SUPPORT BIT(7) |