Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from Davic Miller:

 1) Support busy polling generically, for all NAPI drivers.  From Eric
    Dumazet.

 2) Add byte/packet counter support to nft_ct, from Floriani Westphal.

 3) Add RSS/XPS support to mvneta driver, from Gregory Clement.

 4) Implement IPV6_HDRINCL socket option for raw sockets, from Hannes
    Frederic Sowa.

 5) Add support for T6 adapter to cxgb4 driver, from Hariprasad Shenai.

 6) Add support for VLAN device bridging to mlxsw switch driver, from
    Ido Schimmel.

 7) Add driver for Netronome NFP4000/NFP6000, from Jakub Kicinski.

 8) Provide hwmon interface to mlxsw switch driver, from Jiri Pirko.

 9) Reorganize wireless drivers into per-vendor directories just like we
    do for ethernet drivers.  From Kalle Valo.

10) Provide a way for administrators "destroy" connected sockets via the
    SOCK_DESTROY socket netlink diag operation.  From Lorenzo Colitti.

11) Add support to add/remove multicast routes via netlink, from Nikolay
    Aleksandrov.

12) Make TCP keepalive settings per-namespace, from Nikolay Borisov.

13) Add forwarding and packet duplication facilities to nf_tables, from
    Pablo Neira Ayuso.

14) Dead route support in MPLS, from Roopa Prabhu.

15) TSO support for thunderx chips, from Sunil Goutham.

16) Add driver for IBM's System i/p VNIC protocol, from Thomas Falcon.

17) Rationalize, consolidate, and more completely document the checksum
    offloading facilities in the networking stack.  From Tom Herbert.

18) Support aborting an ongoing scan in mac80211/cfg80211, from
    Vidyullatha Kanchanapally.

19) Use per-bucket spinlock for bpf hash facility, from Tom Leiming.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1375 commits)
  net: bnxt: always return values from _bnxt_get_max_rings
  net: bpf: reject invalid shifts
  phonet: properly unshare skbs in phonet_rcv()
  dwc_eth_qos: Fix dma address for multi-fragment skbs
  phy: remove an unneeded condition
  mdio: remove an unneed condition
  mdio_bus: NULL dereference on allocation error
  net: Fix typo in netdev_intersect_features
  net: freescale: mac-fec: Fix build error from phy_device API change
  net: freescale: ucc_geth: Fix build error from phy_device API change
  bonding: Prevent IPv6 link local address on enslaved devices
  IB/mlx5: Add flow steering support
  net/mlx5_core: Export flow steering API
  net/mlx5_core: Make ipv4/ipv6 location more clear
  net/mlx5_core: Enable flow steering support for the IB driver
  net/mlx5_core: Initialize namespaces only when supported by device
  net/mlx5_core: Set priority attributes
  net/mlx5_core: Connect flow tables
  net/mlx5_core: Introduce modify flow table command
  net/mlx5_core: Managing root flow table
  ...

1 files changed, 504 insertions, 0 deletions

diff --git a/drivers/net/wireless/intersil/prism54/isl_oid.h b/drivers/net/wireless/intersil/prism54/isl_oid.h
new file mode 100644
index 000000000000..83fec557997e
--- /dev/null
+++ b/drivers/net/wireless/intersil/prism54/isl_oid.h
@@ -0,0 +1,504 @@
+/*
+ *  Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
+ *  Copyright (C) 2004 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
+ *  Copyright (C) 2004 Aurelien Alleaume <slts@free.fr>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#if !defined(_ISL_OID_H)
+#define _ISL_OID_H
+
+/*
+ * MIB related constant and structure definitions for communicating
+ * with the device firmware
+ */
+
+struct obj_ssid {
+	u8 length;
+	char octets[33];
+} __packed;
+
+struct obj_key {
+	u8 type;		/* dot11_priv_t */
+	u8 length;
+	char key[32];
+} __packed;
+
+struct obj_mlme {
+	u8 address[6];
+	u16 id;
+	u16 state;
+	u16 code;
+} __packed;
+
+struct obj_mlmeex {
+	u8 address[6];
+	u16 id;
+	u16 state;
+	u16 code;
+	u16 size;
+	u8 data[0];
+} __packed;
+
+struct obj_buffer {
+	u32 size;
+	u32 addr;		/* 32bit bus address */
+} __packed;
+
+struct obj_bss {
+	u8 address[6];
+	int:16;			/* padding */
+
+	char state;
+	char reserved;
+	short age;
+
+	char quality;
+	char rssi;
+
+	struct obj_ssid ssid;
+	short channel;
+	char beacon_period;
+	char dtim_period;
+	short capinfo;
+	short rates;
+	short basic_rates;
+	int:16;			/* padding */
+} __packed;
+
+struct obj_bsslist {
+	u32 nr;
+	struct obj_bss bsslist[0];
+} __packed;
+
+struct obj_frequencies {
+	u16 nr;
+	u16 mhz[0];
+} __packed;
+
+struct obj_attachment {
+	char type;
+	char reserved;
+	short id;
+	short size;
+	char data[0];
+} __packed;
+
+/*
+ * in case everything's ok, the inlined function below will be
+ * optimized away by the compiler...
+ */
+static inline void
+__bug_on_wrong_struct_sizes(void)
+{
+	BUILD_BUG_ON(sizeof (struct obj_ssid) != 34);
+	BUILD_BUG_ON(sizeof (struct obj_key) != 34);
+	BUILD_BUG_ON(sizeof (struct obj_mlme) != 12);
+	BUILD_BUG_ON(sizeof (struct obj_mlmeex) != 14);
+	BUILD_BUG_ON(sizeof (struct obj_buffer) != 8);
+	BUILD_BUG_ON(sizeof (struct obj_bss) != 60);
+	BUILD_BUG_ON(sizeof (struct obj_bsslist) != 4);
+	BUILD_BUG_ON(sizeof (struct obj_frequencies) != 2);
+}
+
+enum dot11_state_t {
+	DOT11_STATE_NONE = 0,
+	DOT11_STATE_AUTHING = 1,
+	DOT11_STATE_AUTH = 2,
+	DOT11_STATE_ASSOCING = 3,
+
+	DOT11_STATE_ASSOC = 5,
+	DOT11_STATE_IBSS = 6,
+	DOT11_STATE_WDS = 7
+};
+
+enum dot11_bsstype_t {
+	DOT11_BSSTYPE_NONE = 0,
+	DOT11_BSSTYPE_INFRA = 1,
+	DOT11_BSSTYPE_IBSS = 2,
+	DOT11_BSSTYPE_ANY = 3
+};
+
+enum dot11_auth_t {
+	DOT11_AUTH_NONE = 0,
+	DOT11_AUTH_OS = 1,
+	DOT11_AUTH_SK = 2,
+	DOT11_AUTH_BOTH = 3
+};
+
+enum dot11_mlme_t {
+	DOT11_MLME_AUTO = 0,
+	DOT11_MLME_INTERMEDIATE = 1,
+	DOT11_MLME_EXTENDED = 2
+};
+
+enum dot11_priv_t {
+	DOT11_PRIV_WEP = 0,
+	DOT11_PRIV_TKIP = 1
+};
+
+/* Prism "Nitro" / Frameburst / "Packet Frame Grouping"
+ * Value is in microseconds. Represents the # microseconds
+ * the firmware will take to group frames before sending out then out
+ * together with a CSMA contention. Without this all frames are
+ * sent with a CSMA contention.
+ * Bibliography:
+ * http://www.hpl.hp.com/personal/Jean_Tourrilhes/Papers/Packet.Frame.Grouping.html
+ */
+enum dot11_maxframeburst_t {
+	/* Values for DOT11_OID_MAXFRAMEBURST */
+	DOT11_MAXFRAMEBURST_OFF = 0, /* Card firmware default */
+	DOT11_MAXFRAMEBURST_MIXED_SAFE = 650, /* 802.11 a,b,g safe */
+	DOT11_MAXFRAMEBURST_IDEAL = 1300, /* Theoretical ideal level */
+	DOT11_MAXFRAMEBURST_MAX = 5000, /* Use this as max,
+		* Note: firmware allows for greater values. This is a
+		* recommended max. I'll update this as I find
+		* out what the real MAX is. Also note that you don't necessarily
+		* get better results with a greater value here.
+		*/
+};
+
+/* Support for 802.11 long and short frame preambles.
+ * Long	 preamble uses 128-bit sync field, 8-bit  CRC
+ * Short preamble uses 56-bit  sync field, 16-bit CRC
+ *
+ * 802.11a -- not sure, both optionally ?
+ * 802.11b supports long and optionally short
+ * 802.11g supports both */
+enum dot11_preamblesettings_t {
+	DOT11_PREAMBLESETTING_LONG = 0,
+		/* Allows *only* long 802.11 preambles */
+	DOT11_PREAMBLESETTING_SHORT = 1,
+		/* Allows *only* short 802.11 preambles */
+	DOT11_PREAMBLESETTING_DYNAMIC = 2
+		/* AutomatiGically set */
+};
+
+/* Support for 802.11 slot timing (time between packets).
+ *
+ * Long uses 802.11a slot timing  (9 usec ?)
+ * Short uses 802.11b slot timing (20 use ?) */
+enum dot11_slotsettings_t {
+	DOT11_SLOTSETTINGS_LONG = 0,
+		/* Allows *only* long 802.11b slot timing */
+	DOT11_SLOTSETTINGS_SHORT = 1,
+		/* Allows *only* long 802.11a slot timing */
+	DOT11_SLOTSETTINGS_DYNAMIC = 2
+		/* AutomatiGically set */
+};
+
+/* All you need to know, ERP is "Extended Rate PHY".
+ * An Extended Rate PHY (ERP) STA or AP shall support three different
+ * preamble and header formats:
+ * Long  preamble (refer to above)
+ * Short preamble (refer to above)
+ * OFDM  preamble ( ? )
+ *
+ * I'm assuming here Protection tells the AP
+ * to be careful, a STA which cannot handle the long pre-amble
+ * has joined.
+ */
+enum do11_nonerpstatus_t {
+	DOT11_ERPSTAT_NONEPRESENT = 0,
+	DOT11_ERPSTAT_USEPROTECTION = 1
+};
+
+/* (ERP is "Extended Rate PHY") Way to read NONERP is NON-ERP-*
+ * The key here is DOT11 NON ERP NEVER protects against
+ * NON ERP STA's. You *don't* want this unless
+ * you know what you are doing. It means you will only
+ * get Extended Rate capabilities */
+enum dot11_nonerpprotection_t {
+	DOT11_NONERP_NEVER = 0,
+	DOT11_NONERP_ALWAYS = 1,
+	DOT11_NONERP_DYNAMIC = 2
+};
+
+/* Preset OID configuration for 802.11 modes
+ * Note: DOT11_OID_CW[MIN|MAX] hold the values of the
+ * DCS MIN|MAX backoff used */
+enum dot11_profile_t { /* And set/allowed values */
+	/* Allowed values for DOT11_OID_PROFILES */
+	DOT11_PROFILE_B_ONLY = 0,
+		/* DOT11_OID_RATES: 1, 2, 5.5, 11Mbps
+		 * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_DYNAMIC
+		 * DOT11_OID_CWMIN: 31
+		 * DOT11_OID_NONEPROTECTION: DOT11_NOERP_DYNAMIC
+		 * DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_LONG
+		 */
+	DOT11_PROFILE_MIXED_G_WIFI = 1,
+		/* DOT11_OID_RATES: 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54Mbs
+		 * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_DYNAMIC
+		 * DOT11_OID_CWMIN: 15
+		 * DOT11_OID_NONEPROTECTION: DOT11_NOERP_DYNAMIC
+		 * DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_DYNAMIC
+		 */
+	DOT11_PROFILE_MIXED_LONG = 2, /* "Long range" */
+		/* Same as Profile MIXED_G_WIFI */
+	DOT11_PROFILE_G_ONLY = 3,
+		/* Same as Profile MIXED_G_WIFI */
+	DOT11_PROFILE_TEST = 4,
+		/* Same as Profile MIXED_G_WIFI except:
+		 * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_SHORT
+		 * DOT11_OID_NONEPROTECTION: DOT11_NOERP_NEVER
+		 * DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_SHORT
+		 */
+	DOT11_PROFILE_B_WIFI = 5,
+		/* Same as Profile B_ONLY */
+	DOT11_PROFILE_A_ONLY = 6,
+		/* Same as Profile MIXED_G_WIFI except:
+		 * DOT11_OID_RATES: 6, 9, 12, 18, 24, 36, 48, 54Mbs
+		 */
+	DOT11_PROFILE_MIXED_SHORT = 7
+		/* Same as MIXED_G_WIFI */
+};
+
+
+/* The dot11d conformance level configures the 802.11d conformance levels.
+ * The following conformance levels exist:*/
+enum oid_inl_conformance_t {
+	OID_INL_CONFORMANCE_NONE = 0,	/* Perform active scanning */
+	OID_INL_CONFORMANCE_STRICT = 1,	/* Strictly adhere to 802.11d */
+	OID_INL_CONFORMANCE_FLEXIBLE = 2,	/* Use passed 802.11d info to
+		* determine channel AND/OR just make assumption that active
+		* channels are valid  channels */
+};
+
+enum oid_inl_mode_t {
+	INL_MODE_NONE = -1,
+	INL_MODE_PROMISCUOUS = 0,
+	INL_MODE_CLIENT = 1,
+	INL_MODE_AP = 2,
+	INL_MODE_SNIFFER = 3
+};
+
+enum oid_inl_config_t {
+	INL_CONFIG_NOTHING = 0x00,
+	INL_CONFIG_MANUALRUN = 0x01,
+	INL_CONFIG_FRAMETRAP = 0x02,
+	INL_CONFIG_RXANNEX = 0x04,
+	INL_CONFIG_TXANNEX = 0x08,
+	INL_CONFIG_WDS = 0x10
+};
+
+enum oid_inl_phycap_t {
+	INL_PHYCAP_2400MHZ = 1,
+	INL_PHYCAP_5000MHZ = 2,
+	INL_PHYCAP_FAA = 0x80000000,	/* Means card supports the FAA switch */
+};
+
+
+enum oid_num_t {
+	GEN_OID_MACADDRESS = 0,
+	GEN_OID_LINKSTATE,
+	GEN_OID_WATCHDOG,
+	GEN_OID_MIBOP,
+	GEN_OID_OPTIONS,
+	GEN_OID_LEDCONFIG,
+
+	/* 802.11 */
+	DOT11_OID_BSSTYPE,
+	DOT11_OID_BSSID,
+	DOT11_OID_SSID,
+	DOT11_OID_STATE,
+	DOT11_OID_AID,
+	DOT11_OID_COUNTRYSTRING,
+	DOT11_OID_SSIDOVERRIDE,
+
+	DOT11_OID_MEDIUMLIMIT,
+	DOT11_OID_BEACONPERIOD,
+	DOT11_OID_DTIMPERIOD,
+	DOT11_OID_ATIMWINDOW,
+	DOT11_OID_LISTENINTERVAL,
+	DOT11_OID_CFPPERIOD,
+	DOT11_OID_CFPDURATION,
+
+	DOT11_OID_AUTHENABLE,
+	DOT11_OID_PRIVACYINVOKED,
+	DOT11_OID_EXUNENCRYPTED,
+	DOT11_OID_DEFKEYID,
+	DOT11_OID_DEFKEYX,	/* DOT11_OID_DEFKEY1,...DOT11_OID_DEFKEY4 */
+	DOT11_OID_STAKEY,
+	DOT11_OID_REKEYTHRESHOLD,
+	DOT11_OID_STASC,
+
+	DOT11_OID_PRIVTXREJECTED,
+	DOT11_OID_PRIVRXPLAIN,
+	DOT11_OID_PRIVRXFAILED,
+	DOT11_OID_PRIVRXNOKEY,
+
+	DOT11_OID_RTSTHRESH,
+	DOT11_OID_FRAGTHRESH,
+	DOT11_OID_SHORTRETRIES,
+	DOT11_OID_LONGRETRIES,
+	DOT11_OID_MAXTXLIFETIME,
+	DOT11_OID_MAXRXLIFETIME,
+	DOT11_OID_AUTHRESPTIMEOUT,
+	DOT11_OID_ASSOCRESPTIMEOUT,
+
+	DOT11_OID_ALOFT_TABLE,
+	DOT11_OID_ALOFT_CTRL_TABLE,
+	DOT11_OID_ALOFT_RETREAT,
+	DOT11_OID_ALOFT_PROGRESS,
+	DOT11_OID_ALOFT_FIXEDRATE,
+	DOT11_OID_ALOFT_RSSIGRAPH,
+	DOT11_OID_ALOFT_CONFIG,
+
+	DOT11_OID_VDCFX,
+	DOT11_OID_MAXFRAMEBURST,
+
+	DOT11_OID_PSM,
+	DOT11_OID_CAMTIMEOUT,
+	DOT11_OID_RECEIVEDTIMS,
+	DOT11_OID_ROAMPREFERENCE,
+
+	DOT11_OID_BRIDGELOCAL,
+	DOT11_OID_CLIENTS,
+	DOT11_OID_CLIENTSASSOCIATED,
+	DOT11_OID_CLIENTX,	/* DOT11_OID_CLIENTX,...DOT11_OID_CLIENT2007 */
+
+	DOT11_OID_CLIENTFIND,
+	DOT11_OID_WDSLINKADD,
+	DOT11_OID_WDSLINKREMOVE,
+	DOT11_OID_EAPAUTHSTA,
+	DOT11_OID_EAPUNAUTHSTA,
+	DOT11_OID_DOT1XENABLE,
+	DOT11_OID_MICFAILURE,
+	DOT11_OID_REKEYINDICATE,
+
+	DOT11_OID_MPDUTXSUCCESSFUL,
+	DOT11_OID_MPDUTXONERETRY,
+	DOT11_OID_MPDUTXMULTIPLERETRIES,
+	DOT11_OID_MPDUTXFAILED,
+	DOT11_OID_MPDURXSUCCESSFUL,
+	DOT11_OID_MPDURXDUPS,
+	DOT11_OID_RTSSUCCESSFUL,
+	DOT11_OID_RTSFAILED,
+	DOT11_OID_ACKFAILED,
+	DOT11_OID_FRAMERECEIVES,
+	DOT11_OID_FRAMEERRORS,
+	DOT11_OID_FRAMEABORTS,
+	DOT11_OID_FRAMEABORTSPHY,
+
+	DOT11_OID_SLOTTIME,
+	DOT11_OID_CWMIN, /* MIN DCS backoff */
+	DOT11_OID_CWMAX, /* MAX DCS backoff */
+	DOT11_OID_ACKWINDOW,
+	DOT11_OID_ANTENNARX,
+	DOT11_OID_ANTENNATX,
+	DOT11_OID_ANTENNADIVERSITY,
+	DOT11_OID_CHANNEL,
+	DOT11_OID_EDTHRESHOLD,
+	DOT11_OID_PREAMBLESETTINGS,
+	DOT11_OID_RATES,
+	DOT11_OID_CCAMODESUPPORTED,
+	DOT11_OID_CCAMODE,
+	DOT11_OID_RSSIVECTOR,
+	DOT11_OID_OUTPUTPOWERTABLE,
+	DOT11_OID_OUTPUTPOWER,
+	DOT11_OID_SUPPORTEDRATES,
+	DOT11_OID_FREQUENCY,
+	DOT11_OID_SUPPORTEDFREQUENCIES,
+	DOT11_OID_NOISEFLOOR,
+	DOT11_OID_FREQUENCYACTIVITY,
+	DOT11_OID_IQCALIBRATIONTABLE,
+	DOT11_OID_NONERPPROTECTION,
+	DOT11_OID_SLOTSETTINGS,
+	DOT11_OID_NONERPTIMEOUT,
+	DOT11_OID_PROFILES,
+	DOT11_OID_EXTENDEDRATES,
+
+	DOT11_OID_DEAUTHENTICATE,
+	DOT11_OID_AUTHENTICATE,
+	DOT11_OID_DISASSOCIATE,
+	DOT11_OID_ASSOCIATE,
+	DOT11_OID_SCAN,
+	DOT11_OID_BEACON,
+	DOT11_OID_PROBE,
+	DOT11_OID_DEAUTHENTICATEEX,
+	DOT11_OID_AUTHENTICATEEX,
+	DOT11_OID_DISASSOCIATEEX,
+	DOT11_OID_ASSOCIATEEX,
+	DOT11_OID_REASSOCIATE,
+	DOT11_OID_REASSOCIATEEX,
+
+	DOT11_OID_NONERPSTATUS,
+
+	DOT11_OID_STATIMEOUT,
+	DOT11_OID_MLMEAUTOLEVEL,
+	DOT11_OID_BSSTIMEOUT,
+	DOT11_OID_ATTACHMENT,
+	DOT11_OID_PSMBUFFER,
+
+	DOT11_OID_BSSS,
+	DOT11_OID_BSSX,		/*DOT11_OID_BSS1,...,DOT11_OID_BSS64 */
+	DOT11_OID_BSSFIND,
+	DOT11_OID_BSSLIST,
+
+	OID_INL_TUNNEL,
+	OID_INL_MEMADDR,
+	OID_INL_MEMORY,
+	OID_INL_MODE,
+	OID_INL_COMPONENT_NR,
+	OID_INL_VERSION,
+	OID_INL_INTERFACE_ID,
+	OID_INL_COMPONENT_ID,
+	OID_INL_CONFIG,
+	OID_INL_DOT11D_CONFORMANCE,
+	OID_INL_PHYCAPABILITIES,
+	OID_INL_OUTPUTPOWER,
+
+	OID_NUM_LAST
+};
+
+#define OID_FLAG_CACHED		0x80
+#define OID_FLAG_TYPE		0x7f
+
+#define OID_TYPE_U32		0x01
+#define OID_TYPE_SSID		0x02
+#define OID_TYPE_KEY		0x03
+#define OID_TYPE_BUFFER		0x04
+#define OID_TYPE_BSS		0x05
+#define OID_TYPE_BSSLIST	0x06
+#define OID_TYPE_FREQUENCIES	0x07
+#define OID_TYPE_MLME		0x08
+#define OID_TYPE_MLMEEX		0x09
+#define OID_TYPE_ADDR		0x0A
+#define OID_TYPE_RAW		0x0B
+#define OID_TYPE_ATTACH		0x0C
+
+/* OID_TYPE_MLMEEX is special because of a variable size field when sending.
+ * Not yet implemented (not used in driver anyway).
+ */
+
+struct oid_t {
+	enum oid_num_t oid;
+	short range;		/* to define a range of oid */
+	short size;		/* max size of the associated data */
+	char flags;
+};
+
+union oid_res_t {
+	void *ptr;
+	u32 u;
+};
+
+#define	IWMAX_BITRATES	20
+#define	IWMAX_BSS	24
+#define IWMAX_FREQ	30
+#define PRIV_STR_SIZE	1024
+
+#endif				/* !defined(_ISL_OID_H) */
+/* EOF */