diff options
| author | Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> | 2024-04-23 12:32:06 +0300 |
|---|---|---|
| committer | Kalle Valo <quic_kvalo@quicinc.com> | 2024-04-24 18:34:10 +0300 |
| commit | ae6ec4a38aa4da73f5d80f61138e03500f00f898 (patch) | |
| tree | b9da83ba13635c528f23ad9517dab5b7a7d7488a /drivers/net/wireless/ath/ath12k | |
| parent | b0afabc4d7e0bb435f63990eff72dd9f2591bf5a (diff) | |
wifi: ath12k: read single_chip_mlo_support parameter from QMI PHY capability
New parameter 'single_chip_mlo_support' was added in QMI PHY
capability response message. This is an optional parameter added
in QCN9274 firmware. This parameter states if the firmware
supports Single-Link Operation (SLO) and Multi-Link Operation (MLO)
within the same device.
If single_chip_mlo_support = 1, then intra device SLO/MLO is supported
in the firmware.
If single_chip_mlo_support = 0, then intra device SLO/MLO is not
supported in the firmware.
Hence, add support to read 'single_chip_mlo_support' parameter from
the QMI PHY capability response message.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240418125609.3867730-2-quic_rajkbhag@quicinc.com
Diffstat (limited to 'drivers/net/wireless/ath/ath12k')
| -rw-r--r-- | drivers/net/wireless/ath/ath12k/qmi.c | 24 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath12k/qmi.h | 2 |
2 files changed, 24 insertions, 2 deletions
diff --git a/drivers/net/wireless/ath/ath12k/qmi.c b/drivers/net/wireless/ath/ath12k/qmi.c index 223637797175..ee24a2f39bc0 100644 --- a/drivers/net/wireless/ath/ath12k/qmi.c +++ b/drivers/net/wireless/ath/ath12k/qmi.c @@ -583,6 +583,24 @@ static const struct qmi_elem_info qmi_wlanfw_phy_cap_resp_msg_v01_ei[] = { board_id), }, { + .data_type = QMI_OPT_FLAG, + .elem_len = 1, + .elem_size = sizeof(u8), + .array_type = NO_ARRAY, + .tlv_type = 0x13, + .offset = offsetof(struct qmi_wlanfw_phy_cap_resp_msg_v01, + single_chip_mlo_support_valid), + }, + { + .data_type = QMI_UNSIGNED_1_BYTE, + .elem_len = 1, + .elem_size = sizeof(u8), + .array_type = NO_ARRAY, + .tlv_type = 0x13, + .offset = offsetof(struct qmi_wlanfw_phy_cap_resp_msg_v01, + single_chip_mlo_support), + }, + { .data_type = QMI_EOTI, .array_type = NO_ARRAY, .tlv_type = QMI_COMMON_TLV_TYPE, @@ -2160,9 +2178,11 @@ static void ath12k_qmi_phy_cap_send(struct ath12k_base *ab) ab->qmi.num_radios = resp.num_phy; - ath12k_dbg(ab, ATH12K_DBG_QMI, "phy capability resp valid %d num_phy %d valid %d board_id %d\n", + ath12k_dbg(ab, ATH12K_DBG_QMI, + "phy capability resp valid %d num_phy %d valid %d board_id %d valid %d single_chip_mlo_support %d\n", resp.num_phy_valid, resp.num_phy, - resp.board_id_valid, resp.board_id); + resp.board_id_valid, resp.board_id, + resp.single_chip_mlo_support_valid, resp.single_chip_mlo_support); return; diff --git a/drivers/net/wireless/ath/ath12k/qmi.h b/drivers/net/wireless/ath/ath12k/qmi.h index f34263d4bee8..0dfcbd8cb59b 100644 --- a/drivers/net/wireless/ath/ath12k/qmi.h +++ b/drivers/net/wireless/ath/ath12k/qmi.h @@ -267,6 +267,8 @@ struct qmi_wlanfw_phy_cap_resp_msg_v01 { u8 num_phy; u8 board_id_valid; u32 board_id; + u8 single_chip_mlo_support_valid; + u8 single_chip_mlo_support; }; #define QMI_WLANFW_IND_REGISTER_REQ_MSG_V01_MAX_LEN 54 |