wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices

ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first
supporting QCN9274 and WCN7850 PCI devices.  QCN9274 supports both AP
and station; WCN7850 supports only station mode. Monitor mode is not
(yet) supported. Only PCI bus devices are supported.

ath12k is forked from an earlier version of ath11k. It was simpler to
have a "clean start" for the new generation and not try to share the
code with ath11k. This makes maintenance easier and avoids major
changes in ath11k, which would have significantly increased the risk
of regressions in existing setups.

ath12k uses le32 and cpu_to_le32() macros to handle endian
conversions, instead of using the firmware byte swap feature utilized
by ath11k. There is only one kernel module, named ath12k.ko.

Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but
work is ongoing to add EHT mode (IEEE 802.11be) support.

The size of the driver is ~41 kLOC and 45 files. To make the review
easier, this initial version of ath12k does not support Device Tree,
debugfs or any other extra features. Those will be added later, after
ath12k is accepted to upstream.

The driver is build tested by Intel's kernel test robot with both GCC
and Clang. Sparse reports no warnings. The driver is mostly free of
checkpatch warnings, albeit few of the warnings are omitted on
purpose, list of them here:

https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52

The driver has had multiple authors who are listed in alphabetical
order below.

Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com>
Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com>
Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com>
Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com>
Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com>
Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com>
Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Co-developed-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
Co-developed-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com>
Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com>
Co-developed-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>

1 files changed, 732 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath12k/reg.c b/drivers/net/wireless/ath/ath12k/reg.c
new file mode 100644
index 000000000000..6ede91ebc8e1
--- /dev/null
+++ b/drivers/net/wireless/ath/ath12k/reg.c
@@ -0,0 +1,732 @@
+// SPDX-License-Identifier: BSD-3-Clause-Clear
+/*
+ * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+#include <linux/rtnetlink.h>
+#include "core.h"
+#include "debug.h"
+
+/* World regdom to be used in case default regd from fw is unavailable */
+#define ATH12K_2GHZ_CH01_11      REG_RULE(2412 - 10, 2462 + 10, 40, 0, 20, 0)
+#define ATH12K_5GHZ_5150_5350    REG_RULE(5150 - 10, 5350 + 10, 80, 0, 30,\
+					  NL80211_RRF_NO_IR)
+#define ATH12K_5GHZ_5725_5850    REG_RULE(5725 - 10, 5850 + 10, 80, 0, 30,\
+					  NL80211_RRF_NO_IR)
+
+#define ETSI_WEATHER_RADAR_BAND_LOW		5590
+#define ETSI_WEATHER_RADAR_BAND_HIGH		5650
+#define ETSI_WEATHER_RADAR_BAND_CAC_TIMEOUT	600000
+
+static const struct ieee80211_regdomain ath12k_world_regd = {
+	.n_reg_rules = 3,
+	.alpha2 = "00",
+	.reg_rules = {
+		ATH12K_2GHZ_CH01_11,
+		ATH12K_5GHZ_5150_5350,
+		ATH12K_5GHZ_5725_5850,
+	}
+};
+
+static bool ath12k_regdom_changes(struct ath12k *ar, char *alpha2)
+{
+	const struct ieee80211_regdomain *regd;
+
+	regd = rcu_dereference_rtnl(ar->hw->wiphy->regd);
+	/* This can happen during wiphy registration where the previous
+	 * user request is received before we update the regd received
+	 * from firmware.
+	 */
+	if (!regd)
+		return true;
+
+	return memcmp(regd->alpha2, alpha2, 2) != 0;
+}
+
+static void
+ath12k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
+{
+	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
+	struct ath12k_wmi_init_country_arg arg;
+	struct ath12k *ar = hw->priv;
+	int ret;
+
+	ath12k_dbg(ar->ab, ATH12K_DBG_REG,
+		   "Regulatory Notification received for %s\n", wiphy_name(wiphy));
+
+	/* Currently supporting only General User Hints. Cell base user
+	 * hints to be handled later.
+	 * Hints from other sources like Core, Beacons are not expected for
+	 * self managed wiphy's
+	 */
+	if (!(request->initiator == NL80211_REGDOM_SET_BY_USER &&
+	      request->user_reg_hint_type == NL80211_USER_REG_HINT_USER)) {
+		ath12k_warn(ar->ab, "Unexpected Regulatory event for this wiphy\n");
+		return;
+	}
+
+	if (!IS_ENABLED(CONFIG_ATH_REG_DYNAMIC_USER_REG_HINTS)) {
+		ath12k_dbg(ar->ab, ATH12K_DBG_REG,
+			   "Country Setting is not allowed\n");
+		return;
+	}
+
+	if (!ath12k_regdom_changes(ar, request->alpha2)) {
+		ath12k_dbg(ar->ab, ATH12K_DBG_REG, "Country is already set\n");
+		return;
+	}
+
+	/* Set the country code to the firmware and wait for
+	 * the WMI_REG_CHAN_LIST_CC EVENT for updating the
+	 * reg info
+	 */
+	arg.flags = ALPHA_IS_SET;
+	memcpy(&arg.cc_info.alpha2, request->alpha2, 2);
+	arg.cc_info.alpha2[2] = 0;
+
+	ret = ath12k_wmi_send_init_country_cmd(ar, &arg);
+	if (ret)
+		ath12k_warn(ar->ab,
+			    "INIT Country code set to fw failed : %d\n", ret);
+}
+
+int ath12k_reg_update_chan_list(struct ath12k *ar)
+{
+	struct ieee80211_supported_band **bands;
+	struct ath12k_wmi_scan_chan_list_arg *arg;
+	struct ieee80211_channel *channel;
+	struct ieee80211_hw *hw = ar->hw;
+	struct ath12k_wmi_channel_arg *ch;
+	enum nl80211_band band;
+	int num_channels = 0;
+	int i, ret;
+
+	bands = hw->wiphy->bands;
+	for (band = 0; band < NUM_NL80211_BANDS; band++) {
+		if (!bands[band])
+			continue;
+
+		for (i = 0; i < bands[band]->n_channels; i++) {
+			if (bands[band]->channels[i].flags &
+			    IEEE80211_CHAN_DISABLED)
+				continue;
+
+			num_channels++;
+		}
+	}
+
+	if (WARN_ON(!num_channels))
+		return -EINVAL;
+
+	arg = kzalloc(struct_size(arg, channel, num_channels), GFP_KERNEL);
+
+	if (!arg)
+		return -ENOMEM;
+
+	arg->pdev_id = ar->pdev->pdev_id;
+	arg->nallchans = num_channels;
+
+	ch = arg->channel;
+
+	for (band = 0; band < NUM_NL80211_BANDS; band++) {
+		if (!bands[band])
+			continue;
+
+		for (i = 0; i < bands[band]->n_channels; i++) {
+			channel = &bands[band]->channels[i];
+
+			if (channel->flags & IEEE80211_CHAN_DISABLED)
+				continue;
+
+			/* TODO: Set to true/false based on some condition? */
+			ch->allow_ht = true;
+			ch->allow_vht = true;
+			ch->allow_he = true;
+
+			ch->dfs_set =
+				!!(channel->flags & IEEE80211_CHAN_RADAR);
+			ch->is_chan_passive = !!(channel->flags &
+						IEEE80211_CHAN_NO_IR);
+			ch->is_chan_passive |= ch->dfs_set;
+			ch->mhz = channel->center_freq;
+			ch->cfreq1 = channel->center_freq;
+			ch->minpower = 0;
+			ch->maxpower = channel->max_power * 2;
+			ch->maxregpower = channel->max_reg_power * 2;
+			ch->antennamax = channel->max_antenna_gain * 2;
+
+			/* TODO: Use appropriate phymodes */
+			if (channel->band == NL80211_BAND_2GHZ)
+				ch->phy_mode = MODE_11G;
+			else
+				ch->phy_mode = MODE_11A;
+
+			if (channel->band == NL80211_BAND_6GHZ &&
+			    cfg80211_channel_is_psc(channel))
+				ch->psc_channel = true;
+
+			ath12k_dbg(ar->ab, ATH12K_DBG_WMI,
+				   "mac channel [%d/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
+				   i, arg->nallchans,
+				   ch->mhz, ch->maxpower, ch->maxregpower,
+				   ch->antennamax, ch->phy_mode);
+
+			ch++;
+			/* TODO: use quarrter/half rate, cfreq12, dfs_cfreq2
+			 * set_agile, reg_class_idx
+			 */
+		}
+	}
+
+	ret = ath12k_wmi_send_scan_chan_list_cmd(ar, arg);
+	kfree(arg);
+
+	return ret;
+}
+
+static void ath12k_copy_regd(struct ieee80211_regdomain *regd_orig,
+			     struct ieee80211_regdomain *regd_copy)
+{
+	u8 i;
+
+	/* The caller should have checked error conditions */
+	memcpy(regd_copy, regd_orig, sizeof(*regd_orig));
+
+	for (i = 0; i < regd_orig->n_reg_rules; i++)
+		memcpy(&regd_copy->reg_rules[i], &regd_orig->reg_rules[i],
+		       sizeof(struct ieee80211_reg_rule));
+}
+
+int ath12k_regd_update(struct ath12k *ar, bool init)
+{
+	struct ieee80211_regdomain *regd, *regd_copy = NULL;
+	int ret, regd_len, pdev_id;
+	struct ath12k_base *ab;
+
+	ab = ar->ab;
+	pdev_id = ar->pdev_idx;
+
+	spin_lock_bh(&ab->base_lock);
+
+	if (init) {
+		/* Apply the regd received during init through
+		 * WMI_REG_CHAN_LIST_CC event. In case of failure to
+		 * receive the regd, initialize with a default world
+		 * regulatory.
+		 */
+		if (ab->default_regd[pdev_id]) {
+			regd = ab->default_regd[pdev_id];
+		} else {
+			ath12k_warn(ab,
+				    "failed to receive default regd during init\n");
+			regd = (struct ieee80211_regdomain *)&ath12k_world_regd;
+		}
+	} else {
+		regd = ab->new_regd[pdev_id];
+	}
+
+	if (!regd) {
+		ret = -EINVAL;
+		spin_unlock_bh(&ab->base_lock);
+		goto err;
+	}
+
+	regd_len = sizeof(*regd) + (regd->n_reg_rules *
+		sizeof(struct ieee80211_reg_rule));
+
+	regd_copy = kzalloc(regd_len, GFP_ATOMIC);
+	if (regd_copy)
+		ath12k_copy_regd(regd, regd_copy);
+
+	spin_unlock_bh(&ab->base_lock);
+
+	if (!regd_copy) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	rtnl_lock();
+	wiphy_lock(ar->hw->wiphy);
+	ret = regulatory_set_wiphy_regd_sync(ar->hw->wiphy, regd_copy);
+	wiphy_unlock(ar->hw->wiphy);
+	rtnl_unlock();
+
+	kfree(regd_copy);
+
+	if (ret)
+		goto err;
+
+	if (ar->state == ATH12K_STATE_ON) {
+		ret = ath12k_reg_update_chan_list(ar);
+		if (ret)
+			goto err;
+	}
+
+	return 0;
+err:
+	ath12k_warn(ab, "failed to perform regd update : %d\n", ret);
+	return ret;
+}
+
+static enum nl80211_dfs_regions
+ath12k_map_fw_dfs_region(enum ath12k_dfs_region dfs_region)
+{
+	switch (dfs_region) {
+	case ATH12K_DFS_REG_FCC:
+	case ATH12K_DFS_REG_CN:
+		return NL80211_DFS_FCC;
+	case ATH12K_DFS_REG_ETSI:
+	case ATH12K_DFS_REG_KR:
+		return NL80211_DFS_ETSI;
+	case ATH12K_DFS_REG_MKK:
+	case ATH12K_DFS_REG_MKK_N:
+		return NL80211_DFS_JP;
+	default:
+		return NL80211_DFS_UNSET;
+	}
+}
+
+static u32 ath12k_map_fw_reg_flags(u16 reg_flags)
+{
+	u32 flags = 0;
+
+	if (reg_flags & REGULATORY_CHAN_NO_IR)
+		flags = NL80211_RRF_NO_IR;
+
+	if (reg_flags & REGULATORY_CHAN_RADAR)
+		flags |= NL80211_RRF_DFS;
+
+	if (reg_flags & REGULATORY_CHAN_NO_OFDM)
+		flags |= NL80211_RRF_NO_OFDM;
+
+	if (reg_flags & REGULATORY_CHAN_INDOOR_ONLY)
+		flags |= NL80211_RRF_NO_OUTDOOR;
+
+	if (reg_flags & REGULATORY_CHAN_NO_HT40)
+		flags |= NL80211_RRF_NO_HT40;
+
+	if (reg_flags & REGULATORY_CHAN_NO_80MHZ)
+		flags |= NL80211_RRF_NO_80MHZ;
+
+	if (reg_flags & REGULATORY_CHAN_NO_160MHZ)
+		flags |= NL80211_RRF_NO_160MHZ;
+
+	return flags;
+}
+
+static bool
+ath12k_reg_can_intersect(struct ieee80211_reg_rule *rule1,
+			 struct ieee80211_reg_rule *rule2)
+{
+	u32 start_freq1, end_freq1;
+	u32 start_freq2, end_freq2;
+
+	start_freq1 = rule1->freq_range.start_freq_khz;
+	start_freq2 = rule2->freq_range.start_freq_khz;
+
+	end_freq1 = rule1->freq_range.end_freq_khz;
+	end_freq2 = rule2->freq_range.end_freq_khz;
+
+	if ((start_freq1 >= start_freq2 &&
+	     start_freq1 < end_freq2) ||
+	    (start_freq2 > start_freq1 &&
+	     start_freq2 < end_freq1))
+		return true;
+
+	/* TODO: Should we restrict intersection feasibility
+	 *  based on min bandwidth of the intersected region also,
+	 *  say the intersected rule should have a  min bandwidth
+	 * of 20MHz?
+	 */
+
+	return false;
+}
+
+static void ath12k_reg_intersect_rules(struct ieee80211_reg_rule *rule1,
+				       struct ieee80211_reg_rule *rule2,
+				       struct ieee80211_reg_rule *new_rule)
+{
+	u32 start_freq1, end_freq1;
+	u32 start_freq2, end_freq2;
+	u32 freq_diff, max_bw;
+
+	start_freq1 = rule1->freq_range.start_freq_khz;
+	start_freq2 = rule2->freq_range.start_freq_khz;
+
+	end_freq1 = rule1->freq_range.end_freq_khz;
+	end_freq2 = rule2->freq_range.end_freq_khz;
+
+	new_rule->freq_range.start_freq_khz = max_t(u32, start_freq1,
+						    start_freq2);
+	new_rule->freq_range.end_freq_khz = min_t(u32, end_freq1, end_freq2);
+
+	freq_diff = new_rule->freq_range.end_freq_khz -
+			new_rule->freq_range.start_freq_khz;
+	max_bw = min_t(u32, rule1->freq_range.max_bandwidth_khz,
+		       rule2->freq_range.max_bandwidth_khz);
+	new_rule->freq_range.max_bandwidth_khz = min_t(u32, max_bw, freq_diff);
+
+	new_rule->power_rule.max_antenna_gain =
+		min_t(u32, rule1->power_rule.max_antenna_gain,
+		      rule2->power_rule.max_antenna_gain);
+
+	new_rule->power_rule.max_eirp = min_t(u32, rule1->power_rule.max_eirp,
+					      rule2->power_rule.max_eirp);
+
+	/* Use the flags of both the rules */
+	new_rule->flags = rule1->flags | rule2->flags;
+
+	/* To be safe, lts use the max cac timeout of both rules */
+	new_rule->dfs_cac_ms = max_t(u32, rule1->dfs_cac_ms,
+				     rule2->dfs_cac_ms);
+}
+
+static struct ieee80211_regdomain *
+ath12k_regd_intersect(struct ieee80211_regdomain *default_regd,
+		      struct ieee80211_regdomain *curr_regd)
+{
+	u8 num_old_regd_rules, num_curr_regd_rules, num_new_regd_rules;
+	struct ieee80211_reg_rule *old_rule, *curr_rule, *new_rule;
+	struct ieee80211_regdomain *new_regd = NULL;
+	u8 i, j, k;
+
+	num_old_regd_rules = default_regd->n_reg_rules;
+	num_curr_regd_rules = curr_regd->n_reg_rules;
+	num_new_regd_rules = 0;
+
+	/* Find the number of intersecting rules to allocate new regd memory */
+	for (i = 0; i < num_old_regd_rules; i++) {
+		old_rule = default_regd->reg_rules + i;
+		for (j = 0; j < num_curr_regd_rules; j++) {
+			curr_rule = curr_regd->reg_rules + j;
+
+			if (ath12k_reg_can_intersect(old_rule, curr_rule))
+				num_new_regd_rules++;
+		}
+	}
+
+	if (!num_new_regd_rules)
+		return NULL;
+
+	new_regd = kzalloc(sizeof(*new_regd) + (num_new_regd_rules *
+			sizeof(struct ieee80211_reg_rule)),
+			GFP_ATOMIC);
+
+	if (!new_regd)
+		return NULL;
+
+	/* We set the new country and dfs region directly and only trim
+	 * the freq, power, antenna gain by intersecting with the
+	 * default regdomain. Also MAX of the dfs cac timeout is selected.
+	 */
+	new_regd->n_reg_rules = num_new_regd_rules;
+	memcpy(new_regd->alpha2, curr_regd->alpha2, sizeof(new_regd->alpha2));
+	new_regd->dfs_region = curr_regd->dfs_region;
+	new_rule = new_regd->reg_rules;
+
+	for (i = 0, k = 0; i < num_old_regd_rules; i++) {
+		old_rule = default_regd->reg_rules + i;
+		for (j = 0; j < num_curr_regd_rules; j++) {
+			curr_rule = curr_regd->reg_rules + j;
+
+			if (ath12k_reg_can_intersect(old_rule, curr_rule))
+				ath12k_reg_intersect_rules(old_rule, curr_rule,
+							   (new_rule + k++));
+		}
+	}
+	return new_regd;
+}
+
+static const char *
+ath12k_reg_get_regdom_str(enum nl80211_dfs_regions dfs_region)
+{
+	switch (dfs_region) {
+	case NL80211_DFS_FCC:
+		return "FCC";
+	case NL80211_DFS_ETSI:
+		return "ETSI";
+	case NL80211_DFS_JP:
+		return "JP";
+	default:
+		return "UNSET";
+	}
+}
+
+static u16
+ath12k_reg_adjust_bw(u16 start_freq, u16 end_freq, u16 max_bw)
+{
+	u16 bw;
+
+	bw = end_freq - start_freq;
+	bw = min_t(u16, bw, max_bw);
+
+	if (bw >= 80 && bw < 160)
+		bw = 80;
+	else if (bw >= 40 && bw < 80)
+		bw = 40;
+	else if (bw < 40)
+		bw = 20;
+
+	return bw;
+}
+
+static void
+ath12k_reg_update_rule(struct ieee80211_reg_rule *reg_rule, u32 start_freq,
+		       u32 end_freq, u32 bw, u32 ant_gain, u32 reg_pwr,
+		       u32 reg_flags)
+{
+	reg_rule->freq_range.start_freq_khz = MHZ_TO_KHZ(start_freq);
+	reg_rule->freq_range.end_freq_khz = MHZ_TO_KHZ(end_freq);
+	reg_rule->freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw);
+	reg_rule->power_rule.max_antenna_gain = DBI_TO_MBI(ant_gain);
+	reg_rule->power_rule.max_eirp = DBM_TO_MBM(reg_pwr);
+	reg_rule->flags = reg_flags;
+}
+
+static void
+ath12k_reg_update_weather_radar_band(struct ath12k_base *ab,
+				     struct ieee80211_regdomain *regd,
+				     struct ath12k_reg_rule *reg_rule,
+				     u8 *rule_idx, u32 flags, u16 max_bw)
+{
+	u32 end_freq;
+	u16 bw;
+	u8 i;
+
+	i = *rule_idx;
+
+	bw = ath12k_reg_adjust_bw(reg_rule->start_freq,
+				  ETSI_WEATHER_RADAR_BAND_LOW, max_bw);
+
+	ath12k_reg_update_rule(regd->reg_rules + i, reg_rule->start_freq,
+			       ETSI_WEATHER_RADAR_BAND_LOW, bw,
+			       reg_rule->ant_gain, reg_rule->reg_power,
+			       flags);
+
+	ath12k_dbg(ab, ATH12K_DBG_REG,
+		   "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n",
+		   i + 1, reg_rule->start_freq, ETSI_WEATHER_RADAR_BAND_LOW,
+		   bw, reg_rule->ant_gain, reg_rule->reg_power,
+		   regd->reg_rules[i].dfs_cac_ms,
+		   flags);
+
+	if (reg_rule->end_freq > ETSI_WEATHER_RADAR_BAND_HIGH)
+		end_freq = ETSI_WEATHER_RADAR_BAND_HIGH;
+	else
+		end_freq = reg_rule->end_freq;
+
+	bw = ath12k_reg_adjust_bw(ETSI_WEATHER_RADAR_BAND_LOW, end_freq,
+				  max_bw);
+
+	i++;
+
+	ath12k_reg_update_rule(regd->reg_rules + i,
+			       ETSI_WEATHER_RADAR_BAND_LOW, end_freq, bw,
+			       reg_rule->ant_gain, reg_rule->reg_power,
+			       flags);
+
+	regd->reg_rules[i].dfs_cac_ms = ETSI_WEATHER_RADAR_BAND_CAC_TIMEOUT;
+
+	ath12k_dbg(ab, ATH12K_DBG_REG,
+		   "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n",
+		   i + 1, ETSI_WEATHER_RADAR_BAND_LOW, end_freq,
+		   bw, reg_rule->ant_gain, reg_rule->reg_power,
+		   regd->reg_rules[i].dfs_cac_ms,
+		   flags);
+
+	if (end_freq == reg_rule->end_freq) {
+		regd->n_reg_rules--;
+		*rule_idx = i;
+		return;
+	}
+
+	bw = ath12k_reg_adjust_bw(ETSI_WEATHER_RADAR_BAND_HIGH,
+				  reg_rule->end_freq, max_bw);
+
+	i++;
+
+	ath12k_reg_update_rule(regd->reg_rules + i, ETSI_WEATHER_RADAR_BAND_HIGH,
+			       reg_rule->end_freq, bw,
+			       reg_rule->ant_gain, reg_rule->reg_power,
+			       flags);
+
+	ath12k_dbg(ab, ATH12K_DBG_REG,
+		   "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n",
+		   i + 1, ETSI_WEATHER_RADAR_BAND_HIGH, reg_rule->end_freq,
+		   bw, reg_rule->ant_gain, reg_rule->reg_power,
+		   regd->reg_rules[i].dfs_cac_ms,
+		   flags);
+
+	*rule_idx = i;
+}
+
+struct ieee80211_regdomain *
+ath12k_reg_build_regd(struct ath12k_base *ab,
+		      struct ath12k_reg_info *reg_info, bool intersect)
+{
+	struct ieee80211_regdomain *tmp_regd, *default_regd, *new_regd = NULL;
+	struct ath12k_reg_rule *reg_rule;
+	u8 i = 0, j = 0, k = 0;
+	u8 num_rules;
+	u16 max_bw;
+	u32 flags;
+	char alpha2[3];
+
+	num_rules = reg_info->num_5g_reg_rules + reg_info->num_2g_reg_rules;
+
+	/* FIXME: Currently taking reg rules for 6G only from Indoor AP mode list.
+	 * This can be updated to choose the combination dynamically based on AP
+	 * type and client type, after complete 6G regulatory support is added.
+	 */
+	if (reg_info->is_ext_reg_event)
+		num_rules += reg_info->num_6g_reg_rules_ap[WMI_REG_INDOOR_AP];
+
+	if (!num_rules)
+		goto ret;
+
+	/* Add max additional rules to accommodate weather radar band */
+	if (reg_info->dfs_region == ATH12K_DFS_REG_ETSI)
+		num_rules += 2;
+
+	tmp_regd = kzalloc(sizeof(*tmp_regd) +
+			   (num_rules * sizeof(struct ieee80211_reg_rule)),
+			   GFP_ATOMIC);
+	if (!tmp_regd)
+		goto ret;
+
+	memcpy(tmp_regd->alpha2, reg_info->alpha2, REG_ALPHA2_LEN + 1);
+	memcpy(alpha2, reg_info->alpha2, REG_ALPHA2_LEN + 1);
+	alpha2[2] = '\0';
+	tmp_regd->dfs_region = ath12k_map_fw_dfs_region(reg_info->dfs_region);
+
+	ath12k_dbg(ab, ATH12K_DBG_REG,
+		   "\r\nCountry %s, CFG Regdomain %s FW Regdomain %d, num_reg_rules %d\n",
+		   alpha2, ath12k_reg_get_regdom_str(tmp_regd->dfs_region),
+		   reg_info->dfs_region, num_rules);
+	/* Update reg_rules[] below. Firmware is expected to
+	 * send these rules in order(2G rules first and then 5G)
+	 */
+	for (; i < num_rules; i++) {
+		if (reg_info->num_2g_reg_rules &&
+		    (i < reg_info->num_2g_reg_rules)) {
+			reg_rule = reg_info->reg_rules_2g_ptr + i;
+			max_bw = min_t(u16, reg_rule->max_bw,
+				       reg_info->max_bw_2g);
+			flags = 0;
+		} else if (reg_info->num_5g_reg_rules &&
+			   (j < reg_info->num_5g_reg_rules)) {
+			reg_rule = reg_info->reg_rules_5g_ptr + j++;
+			max_bw = min_t(u16, reg_rule->max_bw,
+				       reg_info->max_bw_5g);
+
+			/* FW doesn't pass NL80211_RRF_AUTO_BW flag for
+			 * BW Auto correction, we can enable this by default
+			 * for all 5G rules here. The regulatory core performs
+			 * BW correction if required and applies flags as
+			 * per other BW rule flags we pass from here
+			 */
+			flags = NL80211_RRF_AUTO_BW;
+		} else if (reg_info->is_ext_reg_event &&
+			   reg_info->num_6g_reg_rules_ap[WMI_REG_INDOOR_AP] &&
+			(k < reg_info->num_6g_reg_rules_ap[WMI_REG_INDOOR_AP])) {
+			reg_rule = reg_info->reg_rules_6g_ap_ptr[WMI_REG_INDOOR_AP] + k++;
+			max_bw = min_t(u16, reg_rule->max_bw,
+				       reg_info->max_bw_6g_ap[WMI_REG_INDOOR_AP]);
+			flags = NL80211_RRF_AUTO_BW;
+		} else {
+			break;
+		}
+
+		flags |= ath12k_map_fw_reg_flags(reg_rule->flags);
+
+		ath12k_reg_update_rule(tmp_regd->reg_rules + i,
+				       reg_rule->start_freq,
+				       reg_rule->end_freq, max_bw,
+				       reg_rule->ant_gain, reg_rule->reg_power,
+				       flags);
+
+		/* Update dfs cac timeout if the dfs domain is ETSI and the
+		 * new rule covers weather radar band.
+		 * Default value of '0' corresponds to 60s timeout, so no
+		 * need to update that for other rules.
+		 */
+		if (flags & NL80211_RRF_DFS &&
+		    reg_info->dfs_region == ATH12K_DFS_REG_ETSI &&
+		    (reg_rule->end_freq > ETSI_WEATHER_RADAR_BAND_LOW &&
+		    reg_rule->start_freq < ETSI_WEATHER_RADAR_BAND_HIGH)){
+			ath12k_reg_update_weather_radar_band(ab, tmp_regd,
+							     reg_rule, &i,
+							     flags, max_bw);
+			continue;
+		}
+
+		if (reg_info->is_ext_reg_event) {
+			ath12k_dbg(ab, ATH12K_DBG_REG, "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d) (%d, %d)\n",
+				   i + 1, reg_rule->start_freq, reg_rule->end_freq,
+				   max_bw, reg_rule->ant_gain, reg_rule->reg_power,
+				   tmp_regd->reg_rules[i].dfs_cac_ms,
+				   flags, reg_rule->psd_flag, reg_rule->psd_eirp);
+		} else {
+			ath12k_dbg(ab, ATH12K_DBG_REG,
+				   "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n",
+				   i + 1, reg_rule->start_freq, reg_rule->end_freq,
+				   max_bw, reg_rule->ant_gain, reg_rule->reg_power,
+				   tmp_regd->reg_rules[i].dfs_cac_ms,
+				   flags);
+		}
+	}
+
+	tmp_regd->n_reg_rules = i;
+
+	if (intersect) {
+		default_regd = ab->default_regd[reg_info->phy_id];
+
+		/* Get a new regd by intersecting the received regd with
+		 * our default regd.
+		 */
+		new_regd = ath12k_regd_intersect(default_regd, tmp_regd);
+		kfree(tmp_regd);
+		if (!new_regd) {
+			ath12k_warn(ab, "Unable to create intersected regdomain\n");
+			goto ret;
+		}
+	} else {
+		new_regd = tmp_regd;
+	}
+
+ret:
+	return new_regd;
+}
+
+void ath12k_regd_update_work(struct work_struct *work)
+{
+	struct ath12k *ar = container_of(work, struct ath12k,
+					 regd_update_work);
+	int ret;
+
+	ret = ath12k_regd_update(ar, false);
+	if (ret) {
+		/* Firmware has already moved to the new regd. We need
+		 * to maintain channel consistency across FW, Host driver
+		 * and userspace. Hence as a fallback mechanism we can set
+		 * the prev or default country code to the firmware.
+		 */
+		/* TODO: Implement Fallback Mechanism */
+	}
+}
+
+void ath12k_reg_init(struct ath12k *ar)
+{
+	ar->hw->wiphy->regulatory_flags = REGULATORY_WIPHY_SELF_MANAGED;
+	ar->hw->wiphy->reg_notifier = ath12k_reg_notifier;
+}
+
+void ath12k_reg_free(struct ath12k_base *ab)
+{
+	int i;
+
+	for (i = 0; i < ab->hw_params->max_radios; i++) {
+		kfree(ab->default_regd[i]);
+		kfree(ab->new_regd[i]);
+	}
+}