Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	drivers/usb/input/Makefile
	drivers/usb/input/gtco.c

11 files changed, 352 insertions, 145 deletions

diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index 9d67f11422ec..861729806dc1 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -63,7 +63,7 @@ MODULE_PARM_DESC (debug, "de2104x bitmapped message enable number");
 
 /* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */
 #if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \
-        || defined(__sparc_) || defined(__ia64__) \
+        || defined(CONFIG_SPARC) || defined(__ia64__) \
         || defined(__sh__) || defined(__mips__)
 static int rx_copybreak = 1518;
 #else
@@ -435,7 +435,6 @@ static void de_rx (struct de_private *de)
 			rx_work = 100;
 			goto rx_next;
 		}
-		copy_skb->dev = de->dev;
 
 		if (!copying_skb) {
 			pci_unmap_single(de->pdev, mapping,
@@ -450,8 +449,8 @@ static void de_rx (struct de_private *de)
 		} else {
 			pci_dma_sync_single_for_cpu(de->pdev, mapping, len, PCI_DMA_FROMDEVICE);
 			skb_reserve(copy_skb, RX_OFFSET);
-			memcpy(skb_put(copy_skb, len), skb->data, len);
-
+			skb_copy_from_linear_data(skb, skb_put(copy_skb, len),
+						  len);
 			pci_dma_sync_single_for_device(de->pdev, mapping, len, PCI_DMA_FROMDEVICE);
 
 			/* We'll reuse the original ring buffer. */
@@ -1685,7 +1684,7 @@ static const struct ethtool_ops de_ethtool_ops = {
 	.get_regs		= de_get_regs,
 };
 
-static void __init de21040_get_mac_address (struct de_private *de)
+static void __devinit de21040_get_mac_address (struct de_private *de)
 {
 	unsigned i;
 
@@ -1703,7 +1702,7 @@ static void __init de21040_get_mac_address (struct de_private *de)
 	}
 }
 
-static void __init de21040_get_media_info(struct de_private *de)
+static void __devinit de21040_get_media_info(struct de_private *de)
 {
 	unsigned int i;
 
@@ -1765,7 +1764,7 @@ static unsigned __devinit tulip_read_eeprom(void __iomem *regs, int location, in
 	return retval;
 }
 
-static void __init de21041_get_srom_info (struct de_private *de)
+static void __devinit de21041_get_srom_info (struct de_private *de)
 {
 	unsigned i, sa_offset = 0, ofs;
 	u8 ee_data[DE_EEPROM_SIZE + 6] = {};
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index 4b3cd3d8b62a..62143f92c231 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -1160,7 +1160,7 @@ de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
 	sprintf(lp->adapter_name,"%s (%s)", name, gendev->bus_id);
 
 	lp->dma_size = (NUM_RX_DESC + NUM_TX_DESC) * sizeof(struct de4x5_desc);
-#if defined(__alpha__) || defined(__powerpc__) || defined(__sparc_v9__) || defined(DE4X5_DO_MEMCPY)
+#if defined(__alpha__) || defined(__powerpc__) || defined(CONFIG_SPARC) || defined(DE4X5_DO_MEMCPY)
 	lp->dma_size += RX_BUFF_SZ * NUM_RX_DESC + DE4X5_ALIGN;
 #endif
 	lp->rx_ring = dma_alloc_coherent(gendev, lp->dma_size,
@@ -1175,7 +1175,7 @@ de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
 	** Set up the RX descriptor ring (Intels)
 	** Allocate contiguous receive buffers, long word aligned (Alphas)
 	*/
-#if !defined(__alpha__) && !defined(__powerpc__) && !defined(__sparc_v9__) && !defined(DE4X5_DO_MEMCPY)
+#if !defined(__alpha__) && !defined(__powerpc__) && !defined(CONFIG_SPARC) && !defined(DE4X5_DO_MEMCPY)
 	for (i=0; i<NUM_RX_DESC; i++) {
 	    lp->rx_ring[i].status = 0;
 	    lp->rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ);
@@ -1252,11 +1252,7 @@ de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
 	    mii_get_phy(dev);
 	}
 
-#ifndef __sparc_v9__
 	printk("      and requires IRQ%d (provided by %s).\n", dev->irq,
-#else
-	printk("      and requires IRQ%x (provided by %s).\n", dev->irq,
-#endif
 	       ((lp->bus == PCI) ? "PCI BIOS" : "EISA CNFG"));
     }
 
@@ -3627,14 +3623,13 @@ de4x5_alloc_rx_buff(struct net_device *dev, int index, int len)
     struct de4x5_private *lp = netdev_priv(dev);
     struct sk_buff *p;
 
-#if !defined(__alpha__) && !defined(__powerpc__) && !defined(__sparc_v9__) && !defined(DE4X5_DO_MEMCPY)
+#if !defined(__alpha__) && !defined(__powerpc__) && !defined(CONFIG_SPARC) && !defined(DE4X5_DO_MEMCPY)
     struct sk_buff *ret;
     u_long i=0, tmp;
 
     p = dev_alloc_skb(IEEE802_3_SZ + DE4X5_ALIGN + 2);
     if (!p) return NULL;
 
-    p->dev = dev;
     tmp = virt_to_bus(p->data);
     i = ((tmp + DE4X5_ALIGN) & ~DE4X5_ALIGN) - tmp;
     skb_reserve(p, i);
@@ -3655,7 +3650,6 @@ de4x5_alloc_rx_buff(struct net_device *dev, int index, int len)
     p = dev_alloc_skb(len + 2);
     if (!p) return NULL;
 
-    p->dev = dev;
     skb_reserve(p, 2);	                               /* Align */
     if (index < lp->rx_old) {                          /* Wrapped buffer */
 	short tlen = (lp->rxRingSize - lp->rx_old) * RX_BUFF_SZ;
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 7f59a3d4fda2..4ed67ff0e81e 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -55,9 +55,6 @@
 
     TODO
 
-    Implement pci_driver::suspend() and pci_driver::resume()
-    power management methods.
-
     Check on 64 bit boxes.
     Check and fix on big endian boxes.
 
@@ -125,6 +122,11 @@
 #define DM9801_NOISE_FLOOR 8
 #define DM9802_NOISE_FLOOR 5
 
+#define DMFE_WOL_LINKCHANGE	0x20000000
+#define DMFE_WOL_SAMPLEPACKET	0x10000000
+#define DMFE_WOL_MAGICPACKET	0x08000000
+
+
 #define DMFE_10MHF      0
 #define DMFE_100MHF     1
 #define DMFE_10MFD      4
@@ -143,9 +145,16 @@
 #define DMFE_TX_TIMEOUT ((3*HZ)/2)	/* tx packet time-out time 1.5 s" */
 #define DMFE_TX_KICK 	(HZ/2)	/* tx packet Kick-out time 0.5 s" */
 
-#define DMFE_DBUG(dbug_now, msg, value) if (dmfe_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value))
+#define DMFE_DBUG(dbug_now, msg, value) \
+	do { \
+ 		if (dmfe_debug || (dbug_now)) \
+			printk(KERN_ERR DRV_NAME ": %s %lx\n",\
+ 				(msg), (long) (value)); \
+	} while (0)
 
-#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half");
+#define SHOW_MEDIA_TYPE(mode) \
+	printk (KERN_INFO DRV_NAME ": Change Speed to %sMhz %s duplex\n" , \
+		(mode & 1) ? "100":"10", (mode & 4) ? "full":"half");
 
 
 /* CR9 definition: SROM/MII */
@@ -163,23 +172,33 @@
 
 #define SROM_V41_CODE   0x14
 
-#define SROM_CLK_WRITE(data, ioaddr) outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5);
+#define SROM_CLK_WRITE(data, ioaddr) \
+	outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \
+	udelay(5); \
+	outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr); \
+	udelay(5); \
+	outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \
+	udelay(5);
+
+#define __CHK_IO_SIZE(pci_id, dev_rev) \
+ (( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x02000030) ) ? \
+	DM9102A_IO_SIZE: DM9102_IO_SIZE)
 
-#define __CHK_IO_SIZE(pci_id, dev_rev) ( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x02000030) ) ? DM9102A_IO_SIZE: DM9102_IO_SIZE
-#define CHK_IO_SIZE(pci_dev, dev_rev) __CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, dev_rev)
+#define CHK_IO_SIZE(pci_dev, dev_rev) \
+	(__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, dev_rev))
 
 /* Sten Check */
 #define DEVICE net_device
 
 /* Structure/enum declaration ------------------------------- */
 struct tx_desc {
-        u32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */
+        __le32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */
         char *tx_buf_ptr;               /* Data for us */
         struct tx_desc *next_tx_desc;
 } __attribute__(( aligned(32) ));
 
 struct rx_desc {
-	u32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */
+	__le32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */
 	struct sk_buff *rx_skb_ptr;	/* Data for us */
 	struct rx_desc *next_rx_desc;
 } __attribute__(( aligned(32) ));
@@ -187,7 +206,7 @@ struct rx_desc {
 struct dmfe_board_info {
 	u32 chip_id;			/* Chip vendor/Device ID */
 	u32 chip_revision;		/* Chip revision */
-	struct DEVICE *dev;		/* net device */
+	struct DEVICE *next_dev;	/* next device */
 	struct pci_dev *pdev;		/* PCI device */
 	spinlock_t lock;
 
@@ -231,10 +250,10 @@ struct dmfe_board_info {
 	u8 media_mode;			/* user specify media mode */
 	u8 op_mode;			/* real work media mode */
 	u8 phy_addr;
-	u8 link_failed;			/* Ever link failed */
 	u8 wait_reset;			/* Hardware failed, need to reset */
 	u8 dm910x_chk_mode;		/* Operating mode check */
 	u8 first_in_callback;		/* Flag to record state */
+	u8 wol_mode;			/* user WOL settings */
 	struct timer_list timer;
 
 	/* System defined statistic counter */
@@ -329,7 +348,7 @@ static void dmfe_program_DM9802(struct dmfe_board_info *);
 static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * );
 static void dmfe_set_phyxcer(struct dmfe_board_info *);
 
-/* DM910X network baord routine ---------------------------- */
+/* DM910X network board routine ---------------------------- */
 
 /*
  *	Search DM910X board ,allocate space and register it
@@ -356,7 +375,8 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 	SET_NETDEV_DEV(dev, &pdev->dev);
 
 	if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
-		printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n");
+		printk(KERN_WARNING DRV_NAME
+			": 32-bit PCI DMA not available.\n");
 		err = -ENODEV;
 		goto err_out_free;
 	}
@@ -399,11 +419,12 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 	/* Init system & device */
 	db = netdev_priv(dev);
 
-	db->dev = dev;
-
 	/* Allocate Tx/Rx descriptor memory */
-	db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr);
-	db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr);
+	db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) *
+			DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr);
+
+	db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC *
+			TX_DESC_CNT + 4, &db->buf_pool_dma_ptr);
 
 	db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
 	db->first_tx_desc_dma = db->desc_pool_dma_ptr;
@@ -413,6 +434,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 	db->chip_id = ent->driver_data;
 	db->ioaddr = pci_resource_start(pdev, 0);
 	db->chip_revision = dev_rev;
+	db->wol_mode = 0;
 
 	db->pdev = pdev;
 
@@ -428,7 +450,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 	dev->poll_controller = &poll_dmfe;
 #endif
 	dev->ethtool_ops = &netdev_ethtool_ops;
-	netif_carrier_off(db->dev);
+	netif_carrier_off(dev);
 	spin_lock_init(&db->lock);
 
 	pci_read_config_dword(pdev, 0x50, &pci_pmr);
@@ -440,7 +462,8 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 
 	/* read 64 word srom data */
 	for (i = 0; i < 64; i++)
-		((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i));
+		((__le16 *) db->srom)[i] =
+			cpu_to_le16(read_srom_word(db->ioaddr, i));
 
 	/* Set Node address */
 	for (i = 0; i < 6; i++)
@@ -482,14 +505,17 @@ static void __devexit dmfe_remove_one (struct pci_dev *pdev)
 	DMFE_DBUG(0, "dmfe_remove_one()", 0);
 
  	if (dev) {
+
+		unregister_netdev(dev);
+
 		pci_free_consistent(db->pdev, sizeof(struct tx_desc) *
 					DESC_ALL_CNT + 0x20, db->desc_pool_ptr,
  					db->desc_pool_dma_ptr);
 		pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
 					db->buf_pool_ptr, db->buf_pool_dma_ptr);
-		unregister_netdev(dev);
 		pci_release_regions(pdev);
 		free_netdev(dev);	/* free board information */
+
 		pci_set_drvdata(pdev, NULL);
 	}
 
@@ -509,7 +535,8 @@ static int dmfe_open(struct DEVICE *dev)
 
 	DMFE_DBUG(0, "dmfe_open", 0);
 
-	ret = request_irq(dev->irq, &dmfe_interrupt, IRQF_SHARED, dev->name, dev);
+	ret = request_irq(dev->irq, &dmfe_interrupt,
+			  IRQF_SHARED, dev->name, dev);
 	if (ret)
 		return ret;
 
@@ -518,7 +545,6 @@ static int dmfe_open(struct DEVICE *dev)
 	db->tx_packet_cnt = 0;
 	db->tx_queue_cnt = 0;
 	db->rx_avail_cnt = 0;
-	db->link_failed = 1;
 	db->wait_reset = 0;
 
 	db->first_in_callback = 0;
@@ -650,7 +676,8 @@ static int dmfe_start_xmit(struct sk_buff *skb, struct DEVICE *dev)
 	/* No Tx resource check, it never happen nromally */
 	if (db->tx_queue_cnt >= TX_FREE_DESC_CNT) {
 		spin_unlock_irqrestore(&db->lock, flags);
-		printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_queue_cnt);
+		printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n",
+		       db->tx_queue_cnt);
 		return 1;
 	}
 
@@ -659,7 +686,7 @@ static int dmfe_start_xmit(struct sk_buff *skb, struct DEVICE *dev)
 
 	/* transmit this packet */
 	txptr = db->tx_insert_ptr;
-	memcpy(txptr->tx_buf_ptr, skb->data, skb->len);
+	skb_copy_from_linear_data(skb, txptr->tx_buf_ptr, skb->len);
 	txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len);
 
 	/* Point to next transmit free descriptor */
@@ -722,7 +749,8 @@ static int dmfe_stop(struct DEVICE *dev)
 
 #if 0
 	/* show statistic counter */
-	printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
+	printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx"
+		" LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
 		db->tx_fifo_underrun, db->tx_excessive_collision,
 		db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier,
 		db->tx_jabber_timeout, db->reset_count, db->reset_cr8,
@@ -905,7 +933,7 @@ static inline u32 cal_CRC(unsigned char * Data, unsigned int Len, u8 flag)
 static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db)
 {
 	struct rx_desc *rxptr;
-	struct sk_buff *skb;
+	struct sk_buff *skb, *newskb;
 	int rxlen;
 	u32 rdes0;
 
@@ -919,7 +947,9 @@ static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db)
 		db->rx_avail_cnt--;
 		db->interval_rx_cnt++;
 
-		pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
+		pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2),
+				 RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
+
 		if ( (rdes0 & 0x300) != 0x300) {
 			/* A packet without First/Last flag */
 			/* reuse this SKB */
@@ -956,18 +986,20 @@ static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db)
 				} else {
 					/* Good packet, send to upper layer */
 					/* Shorst packet used new SKB */
-					if ( (rxlen < RX_COPY_SIZE) &&
-						( (skb = dev_alloc_skb(rxlen + 2) )
-						!= NULL) ) {
+					if ((rxlen < RX_COPY_SIZE) &&
+						((newskb = dev_alloc_skb(rxlen + 2))
+						!= NULL)) {
+
+						skb = newskb;
 						/* size less than COPY_SIZE, allocate a rxlen SKB */
-						skb->dev = dev;
 						skb_reserve(skb, 2); /* 16byte align */
-						memcpy(skb_put(skb, rxlen), rxptr->rx_skb_ptr->data, rxlen);
+						skb_copy_from_linear_data(rxptr->rx_skb_ptr,
+							  skb_put(skb, rxlen),
+									  rxlen);
 						dmfe_reuse_skb(db, rxptr->rx_skb_ptr);
-					} else {
-						skb->dev = dev;
+					} else
 						skb_put(skb, rxlen);
-					}
+
 					skb->protocol = eth_type_trans(skb, dev);
 					netif_rx(skb);
 					dev->last_rx = jiffies;
@@ -1037,7 +1069,11 @@ static void dmfe_set_filter_mode(struct DEVICE * dev)
 	spin_unlock_irqrestore(&db->lock, flags);
 }
 
-static void netdev_get_drvinfo(struct net_device *dev,
+/*
+ * 	Ethtool interace
+ */
+
+static void dmfe_ethtool_get_drvinfo(struct net_device *dev,
 			       struct ethtool_drvinfo *info)
 {
 	struct dmfe_board_info *np = netdev_priv(dev);
@@ -1051,9 +1087,35 @@ static void netdev_get_drvinfo(struct net_device *dev,
 			dev->base_addr, dev->irq);
 }
 
+static int dmfe_ethtool_set_wol(struct net_device *dev,
+				struct ethtool_wolinfo *wolinfo)
+{
+	struct dmfe_board_info *db = netdev_priv(dev);
+
+	if (wolinfo->wolopts & (WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
+		   		WAKE_ARP | WAKE_MAGICSECURE))
+		   return -EOPNOTSUPP;
+
+	db->wol_mode = wolinfo->wolopts;
+	return 0;
+}
+
+static void dmfe_ethtool_get_wol(struct net_device *dev,
+				 struct ethtool_wolinfo *wolinfo)
+{
+	struct dmfe_board_info *db = netdev_priv(dev);
+
+	wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
+	wolinfo->wolopts = db->wol_mode;
+	return;
+}
+
+
 static const struct ethtool_ops netdev_ethtool_ops = {
-	.get_drvinfo		= netdev_get_drvinfo,
+	.get_drvinfo		= dmfe_ethtool_get_drvinfo,
 	.get_link               = ethtool_op_get_link,
+	.set_wol		= dmfe_ethtool_set_wol,
+	.get_wol		= dmfe_ethtool_get_wol,
 };
 
 /*
@@ -1069,6 +1131,8 @@ static void dmfe_timer(unsigned long data)
 	struct dmfe_board_info *db = netdev_priv(dev);
  	unsigned long flags;
 
+	int link_ok, link_ok_phy;
+
 	DMFE_DBUG(0, "dmfe_timer()", 0);
 	spin_lock_irqsave(&db->lock, flags);
 
@@ -1078,7 +1142,8 @@ static void dmfe_timer(unsigned long data)
 		if (db->chip_type && (db->chip_id==PCI_DM9102_ID)) {
 			db->cr6_data &= ~0x40000;
 			update_cr6(db->cr6_data, db->ioaddr);
-			phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id);
+			phy_write(db->ioaddr,
+				  db->phy_addr, 0, 0x1000, db->chip_id);
 			db->cr6_data |= 0x40000;
 			update_cr6(db->cr6_data, db->ioaddr);
 			db->timer.expires = DMFE_TIMER_WUT + HZ * 2;
@@ -1139,21 +1204,41 @@ static void dmfe_timer(unsigned long data)
 		(db->chip_revision == 0x02000010)) ) {
 		/* DM9102A Chip */
 		if (tmp_cr12 & 2)
-			tmp_cr12 = 0x0;		/* Link failed */
+			link_ok = 0;
 		else
-			tmp_cr12 = 0x3;	/* Link OK */
+			link_ok = 1;
 	}
+	else
+		/*0x43 is used instead of 0x3 because bit 6 should represent
+			link status of external PHY */
+		link_ok = (tmp_cr12 & 0x43) ? 1 : 0;
+
 
-	if ( !(tmp_cr12 & 0x3) && !db->link_failed ) {
+	/* If chip reports that link is failed it could be because external
+		PHY link status pin is not conected correctly to chip
+		To be sure ask PHY too.
+	*/
+
+	/* need a dummy read because of PHY's register latch*/
+	phy_read (db->ioaddr, db->phy_addr, 1, db->chip_id);
+	link_ok_phy = (phy_read (db->ioaddr,
+		       db->phy_addr, 1, db->chip_id) & 0x4) ? 1 : 0;
+
+	if (link_ok_phy != link_ok) {
+		DMFE_DBUG (0, "PHY and chip report different link status", 0);
+		link_ok = link_ok | link_ok_phy;
+ 	}
+
+	if ( !link_ok && netif_carrier_ok(dev)) {
 		/* Link Failed */
 		DMFE_DBUG(0, "Link Failed", tmp_cr12);
-		db->link_failed = 1;
-		netif_carrier_off(db->dev);
+		netif_carrier_off(dev);
 
 		/* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
 		/* AUTO or force 1M Homerun/Longrun don't need */
 		if ( !(db->media_mode & 0x38) )
-			phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id);
+			phy_write(db->ioaddr, db->phy_addr,
+				  0, 0x1000, db->chip_id);
 
 		/* AUTO mode, if INT phyxcer link failed, select EXT device */
 		if (db->media_mode & DMFE_AUTO) {
@@ -1162,21 +1247,19 @@ static void dmfe_timer(unsigned long data)
 			db->cr6_data&=~0x00000200;	/* bit9=0, HD mode */
 			update_cr6(db->cr6_data, db->ioaddr);
 		}
-	} else
-		if ((tmp_cr12 & 0x3) && db->link_failed) {
-			DMFE_DBUG(0, "Link link OK", tmp_cr12);
-			db->link_failed = 0;
-
-			/* Auto Sense Speed */
-			if ( (db->media_mode & DMFE_AUTO) &&
-				dmfe_sense_speed(db) )
-				db->link_failed = 1;
-			else
-				netif_carrier_on(db->dev);
-			dmfe_process_mode(db);
-			/* SHOW_MEDIA_TYPE(db->op_mode); */
+	} else if (!netif_carrier_ok(dev)) {
+
+		DMFE_DBUG(0, "Link link OK", tmp_cr12);
+
+		/* Auto Sense Speed */
+		if ( !(db->media_mode & DMFE_AUTO) || !dmfe_sense_speed(db)) {
+			netif_carrier_on(dev);
+			SHOW_MEDIA_TYPE(db->op_mode);
 		}
 
+		dmfe_process_mode(db);
+	}
+
 	/* HPNA remote command check */
 	if (db->HPNA_command & 0xf00) {
 		db->HPNA_timer--;
@@ -1221,7 +1304,7 @@ static void dmfe_dynamic_reset(struct DEVICE *dev)
 	db->tx_packet_cnt = 0;
 	db->tx_queue_cnt = 0;
 	db->rx_avail_cnt = 0;
-	db->link_failed = 1;
+	netif_carrier_off(dev);
 	db->wait_reset = 0;
 
 	/* Re-initilize DM910X board */
@@ -1259,7 +1342,8 @@ static void dmfe_reuse_skb(struct dmfe_board_info *db, struct sk_buff * skb)
 
 	if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) {
 		rxptr->rx_skb_ptr = skb;
-		rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->data, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+		rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev,
+			    skb->data, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
 		wmb();
 		rxptr->rdes0 = cpu_to_le32(0x80000000);
 		db->rx_avail_cnt++;
@@ -1291,8 +1375,11 @@ static void dmfe_descriptor_init(struct dmfe_board_info *db, unsigned long ioadd
 	outl(db->first_tx_desc_dma, ioaddr + DCR4);     /* TX DESC address */
 
 	/* rx descriptor start pointer */
-	db->first_rx_desc = (void *)db->first_tx_desc + sizeof(struct tx_desc) * TX_DESC_CNT;
-	db->first_rx_desc_dma =  db->first_tx_desc_dma + sizeof(struct tx_desc) * TX_DESC_CNT;
+	db->first_rx_desc = (void *)db->first_tx_desc +
+			sizeof(struct tx_desc) * TX_DESC_CNT;
+
+	db->first_rx_desc_dma =  db->first_tx_desc_dma +
+			sizeof(struct tx_desc) * TX_DESC_CNT;
 	db->rx_insert_ptr = db->first_rx_desc;
 	db->rx_ready_ptr = db->first_rx_desc;
 	outl(db->first_rx_desc_dma, ioaddr + DCR3);	/* RX DESC address */
@@ -1470,7 +1557,8 @@ static void allocate_rx_buffer(struct dmfe_board_info *db)
 		if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL )
 			break;
 		rxptr->rx_skb_ptr = skb; /* FIXME (?) */
-		rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->data, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+		rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->data,
+				    RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
 		wmb();
 		rxptr->rdes0 = cpu_to_le32(0x80000000);
 		rxptr = rxptr->next_rx_desc;
@@ -1510,7 +1598,8 @@ static u16 read_srom_word(long ioaddr, int offset)
 	for (i = 16; i > 0; i--) {
 		outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr);
 		udelay(5);
-		srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0);
+		srom_data = (srom_data << 1) |
+				((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0);
 		outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
 		udelay(5);
 	}
@@ -1537,9 +1626,11 @@ static u8 dmfe_sense_speed(struct dmfe_board_info * db)
 
 	if ( (phy_mode & 0x24) == 0x24 ) {
 		if (db->chip_id == PCI_DM9132_ID)	/* DM9132 */
-			phy_mode = phy_read(db->ioaddr, db->phy_addr, 7, db->chip_id) & 0xf000;
+			phy_mode = phy_read(db->ioaddr,
+				    db->phy_addr, 7, db->chip_id) & 0xf000;
 		else 				/* DM9102/DM9102A */
-			phy_mode = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id) & 0xf000;
+			phy_mode = phy_read(db->ioaddr,
+				    db->phy_addr, 17, db->chip_id) & 0xf000;
 		/* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */
 		switch (phy_mode) {
 		case 0x1000: db->op_mode = DMFE_10MHF; break;
@@ -1576,8 +1667,11 @@ static void dmfe_set_phyxcer(struct dmfe_board_info *db)
 
 	/* DM9009 Chip: Phyxcer reg18 bit12=0 */
 	if (db->chip_id == PCI_DM9009_ID) {
-		phy_reg = phy_read(db->ioaddr, db->phy_addr, 18, db->chip_id) & ~0x1000;
-		phy_write(db->ioaddr, db->phy_addr, 18, phy_reg, db->chip_id);
+		phy_reg = phy_read(db->ioaddr,
+				   db->phy_addr, 18, db->chip_id) & ~0x1000;
+
+		phy_write(db->ioaddr,
+			  db->phy_addr, 18, phy_reg, db->chip_id);
 	}
 
 	/* Phyxcer capability setting */
@@ -1650,10 +1744,12 @@ static void dmfe_process_mode(struct dmfe_board_info *db)
 			case DMFE_100MHF: phy_reg = 0x2000; break;
 			case DMFE_100MFD: phy_reg = 0x2100; break;
 			}
-			phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id);
+			phy_write(db->ioaddr,
+				  db->phy_addr, 0, phy_reg, db->chip_id);
        			if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) )
 				mdelay(20);
-			phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id);
+			phy_write(db->ioaddr,
+				  db->phy_addr, 0, phy_reg, db->chip_id);
 		}
 	}
 }
@@ -1663,7 +1759,8 @@ static void dmfe_process_mode(struct dmfe_board_info *db)
  *	Write a word to Phy register
  */
 
-static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data, u32 chip_id)
+static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
+		      u16 phy_data, u32 chip_id)
 {
 	u16 i;
 	unsigned long ioaddr;
@@ -1689,11 +1786,13 @@ static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data
 
 		/* Send Phy address */
 		for (i = 0x10; i > 0; i = i >> 1)
-			phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0);
+			phy_write_1bit(ioaddr,
+				       phy_addr & i ? PHY_DATA_1 : PHY_DATA_0);
 
 		/* Send register address */
 		for (i = 0x10; i > 0; i = i >> 1)
-			phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0);
+			phy_write_1bit(ioaddr,
+				       offset & i ? PHY_DATA_1 : PHY_DATA_0);
 
 		/* written trasnition */
 		phy_write_1bit(ioaddr, PHY_DATA_1);
@@ -1701,7 +1800,8 @@ static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data
 
 		/* Write a word data to PHY controller */
 		for ( i = 0x8000; i > 0; i >>= 1)
-			phy_write_1bit(ioaddr, phy_data & i ? PHY_DATA_1 : PHY_DATA_0);
+			phy_write_1bit(ioaddr,
+				       phy_data & i ? PHY_DATA_1 : PHY_DATA_0);
 	}
 }
 
@@ -1738,11 +1838,13 @@ static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id)
 
 		/* Send Phy address */
 		for (i = 0x10; i > 0; i = i >> 1)
-			phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0);
+			phy_write_1bit(ioaddr,
+				       phy_addr & i ? PHY_DATA_1 : PHY_DATA_0);
 
 		/* Send register address */
 		for (i = 0x10; i > 0; i = i >> 1)
-			phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0);
+			phy_write_1bit(ioaddr,
+				       offset & i ? PHY_DATA_1 : PHY_DATA_0);
 
 		/* Skip transition state */
 		phy_read_1bit(ioaddr);
@@ -1963,7 +2065,8 @@ static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * db)
 
 	/* Check remote device status match our setting ot not */
 	if ( phy_reg != (db->HPNA_command & 0x0f00) ) {
-		phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id);
+		phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command,
+			  db->chip_id);
 		db->HPNA_timer=8;
 	} else
 		db->HPNA_timer=600;	/* Match, every 10 minutes, check */
@@ -1981,11 +2084,85 @@ static struct pci_device_id dmfe_pci_tbl[] = {
 MODULE_DEVICE_TABLE(pci, dmfe_pci_tbl);
 
 
+#ifdef CONFIG_PM
+static int dmfe_suspend(struct pci_dev *pci_dev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata(pci_dev);
+	struct dmfe_board_info *db = netdev_priv(dev);
+	u32 tmp;
+
+	/* Disable upper layer interface */
+	netif_device_detach(dev);
+
+	/* Disable Tx/Rx */
+	db->cr6_data &= ~(CR6_RXSC | CR6_TXSC);
+	update_cr6(db->cr6_data, dev->base_addr);
+
+	/* Disable Interrupt */
+	outl(0, dev->base_addr + DCR7);
+	outl(inl (dev->base_addr + DCR5), dev->base_addr + DCR5);
+
+	/* Fre RX buffers */
+	dmfe_free_rxbuffer(db);
+
+	/* Enable WOL */
+	pci_read_config_dword(pci_dev, 0x40, &tmp);
+	tmp &= ~(DMFE_WOL_LINKCHANGE|DMFE_WOL_MAGICPACKET);
+
+	if (db->wol_mode & WAKE_PHY)
+		tmp |= DMFE_WOL_LINKCHANGE;
+	if (db->wol_mode & WAKE_MAGIC)
+		tmp |= DMFE_WOL_MAGICPACKET;
+
+	pci_write_config_dword(pci_dev, 0x40, tmp);
+
+	pci_enable_wake(pci_dev, PCI_D3hot, 1);
+	pci_enable_wake(pci_dev, PCI_D3cold, 1);
+
+	/* Power down device*/
+	pci_set_power_state(pci_dev, pci_choose_state (pci_dev,state));
+	pci_save_state(pci_dev);
+
+	return 0;
+}
+
+static int dmfe_resume(struct pci_dev *pci_dev)
+{
+	struct net_device *dev = pci_get_drvdata(pci_dev);
+	u32 tmp;
+
+	pci_restore_state(pci_dev);
+	pci_set_power_state(pci_dev, PCI_D0);
+
+	/* Re-initilize DM910X board */
+	dmfe_init_dm910x(dev);
+
+	/* Disable WOL */
+	pci_read_config_dword(pci_dev, 0x40, &tmp);
+
+	tmp &= ~(DMFE_WOL_LINKCHANGE | DMFE_WOL_MAGICPACKET);
+	pci_write_config_dword(pci_dev, 0x40, tmp);
+
+	pci_enable_wake(pci_dev, PCI_D3hot, 0);
+	pci_enable_wake(pci_dev, PCI_D3cold, 0);
+
+	/* Restart upper layer interface */
+	netif_device_attach(dev);
+
+	return 0;
+}
+#else
+#define dmfe_suspend NULL
+#define dmfe_resume NULL
+#endif
+
 static struct pci_driver dmfe_driver = {
 	.name		= "dmfe",
 	.id_table	= dmfe_pci_tbl,
 	.probe		= dmfe_init_one,
 	.remove		= __devexit_p(dmfe_remove_one),
+	.suspend        = dmfe_suspend,
+	.resume         = dmfe_resume
 };
 
 MODULE_AUTHOR("Sten Wang, sten_wang@davicom.com.tw");
@@ -2003,8 +2180,11 @@ module_param(HPNA_tx_cmd, byte, 0);
 module_param(HPNA_NoiseFloor, byte, 0);
 module_param(SF_mode, byte, 0);
 MODULE_PARM_DESC(debug, "Davicom DM9xxx enable debugging (0-1)");
-MODULE_PARM_DESC(mode, "Davicom DM9xxx: Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA");
-MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function (bit 0: VLAN, bit 1 Flow Control, bit 2: TX pause packet)");
+MODULE_PARM_DESC(mode, "Davicom DM9xxx: "
+		"Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA");
+
+MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function "
+		"(bit 0: VLAN, bit 1 Flow Control, bit 2: TX pause packet)");
 
 /*	Description:
  *	when user used insmod to add module, system invoked init_module()
diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c
index e3488d7b8ede..9b08afbd1f65 100644
--- a/drivers/net/tulip/interrupt.c
+++ b/drivers/net/tulip/interrupt.c
@@ -192,7 +192,6 @@ int tulip_poll(struct net_device *dev, int *budget)
                                   to a minimally-sized skbuff. */
                                if (pkt_len < tulip_rx_copybreak
                                    && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
-                                       skb->dev = dev;
                                        skb_reserve(skb, 2);    /* 16 byte align the IP header */
                                        pci_dma_sync_single_for_cpu(tp->pdev,
 								   tp->rx_buffers[entry].mapping,
@@ -416,7 +415,6 @@ static int tulip_rx(struct net_device *dev)
 			   to a minimally-sized skbuff. */
 			if (pkt_len < tulip_rx_copybreak
 				&& (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
-				skb->dev = dev;
 				skb_reserve(skb, 2);	/* 16 byte align the IP header */
 				pci_dma_sync_single_for_cpu(tp->pdev,
 							    tp->rx_buffers[entry].mapping,
@@ -675,7 +673,7 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
 				if (tp->link_change)
 					(tp->link_change)(dev, csr5);
 			}
-			if (csr5 & SytemError) {
+			if (csr5 & SystemError) {
 				int error = (csr5 >> 23) & 7;
 				/* oops, we hit a PCI error.  The code produced corresponds
 				 * to the reason:
@@ -745,7 +743,7 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
 			  TxFIFOUnderflow |
 			  TxJabber |
 			  TPLnkFail |
-			  SytemError )) != 0);
+			  SystemError )) != 0);
 #else
 	} while ((csr5 & (NormalIntr|AbnormalIntr)) != 0);
 
diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c
index 20bd52b86993..b56256636543 100644
--- a/drivers/net/tulip/media.c
+++ b/drivers/net/tulip/media.c
@@ -44,8 +44,10 @@ static const unsigned char comet_miireg2offset[32] = {
 
 /* MII transceiver control section.
    Read and write the MII registers using software-generated serial
-   MDIO protocol.  See the MII specifications or DP83840A data sheet
-   for details. */
+   MDIO protocol.
+   See IEEE 802.3-2002.pdf (Section 2, Chapter "22.2.4 Management functions")
+   or DP83840A data sheet for more details.
+   */
 
 int tulip_mdio_read(struct net_device *dev, int phy_id, int location)
 {
@@ -261,24 +263,56 @@ void tulip_select_media(struct net_device *dev, int startup)
 				u16 *reset_sequence = &((u16*)(p+3))[init_length];
 				int reset_length = p[2 + init_length*2];
 				misc_info = reset_sequence + reset_length;
-				if (startup)
+				if (startup) {
+					int timeout = 10;	/* max 1 ms */
 					for (i = 0; i < reset_length; i++)
 						iowrite32(get_u16(&reset_sequence[i]) << 16, ioaddr + CSR15);
+
+					/* flush posted writes */
+					ioread32(ioaddr + CSR15);
+
+					/* Sect 3.10.3 in DP83840A.pdf (p39) */
+					udelay(500);
+
+					/* Section 4.2 in DP83840A.pdf (p43) */
+					/* and IEEE 802.3 "22.2.4.1.1 Reset" */
+					while (timeout-- &&
+						(tulip_mdio_read (dev, phy_num, MII_BMCR) & BMCR_RESET))
+						udelay(100);
+				}
 				for (i = 0; i < init_length; i++)
 					iowrite32(get_u16(&init_sequence[i]) << 16, ioaddr + CSR15);
+
+				ioread32(ioaddr + CSR15);	/* flush posted writes */
 			} else {
 				u8 *init_sequence = p + 2;
 				u8 *reset_sequence = p + 3 + init_length;
 				int reset_length = p[2 + init_length];
 				misc_info = (u16*)(reset_sequence + reset_length);
 				if (startup) {
+					int timeout = 10;	/* max 1 ms */
 					iowrite32(mtable->csr12dir | 0x100, ioaddr + CSR12);
 					for (i = 0; i < reset_length; i++)
 						iowrite32(reset_sequence[i], ioaddr + CSR12);
+
+					/* flush posted writes */
+					ioread32(ioaddr + CSR12);
+
+					/* Sect 3.10.3 in DP83840A.pdf (p39) */
+					udelay(500);
+
+					/* Section 4.2 in DP83840A.pdf (p43) */
+					/* and IEEE 802.3 "22.2.4.1.1 Reset" */
+					while (timeout-- &&
+						(tulip_mdio_read (dev, phy_num, MII_BMCR) & BMCR_RESET))
+						udelay(100);
 				}
 				for (i = 0; i < init_length; i++)
 					iowrite32(init_sequence[i], ioaddr + CSR12);
+
+				ioread32(ioaddr + CSR12);	/* flush posted writes */
 			}
+
 			tmp_info = get_u16(&misc_info[1]);
 			if (tmp_info)
 				tp->advertising[phy_num] = tmp_info | 1;
diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h
index 25f25da76917..c840d2e67b23 100644
--- a/drivers/net/tulip/tulip.h
+++ b/drivers/net/tulip/tulip.h
@@ -132,7 +132,7 @@ enum pci_cfg_driver_reg {
 /* The bits in the CSR5 status registers, mostly interrupt sources. */
 enum status_bits {
 	TimerInt = 0x800,
-	SytemError = 0x2000,
+	SystemError = 0x2000,
 	TPLnkFail = 0x1000,
 	TPLnkPass = 0x10,
 	NormalIntr = 0x10000,
@@ -482,8 +482,11 @@ static inline void tulip_stop_rxtx(struct tulip_private *tp)
 			udelay(10);
 
 		if (!i)
-			printk(KERN_DEBUG "%s: tulip_stop_rxtx() failed\n",
-					pci_name(tp->pdev));
+			printk(KERN_DEBUG "%s: tulip_stop_rxtx() failed"
+					" (CSR5 0x%x CSR6 0x%x)\n",
+					pci_name(tp->pdev),
+					ioread32(ioaddr + CSR5),
+					ioread32(ioaddr + CSR6));
 	}
 }
 
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 5a35354aa523..041af63f2811 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -17,11 +17,11 @@
 
 #define DRV_NAME	"tulip"
 #ifdef CONFIG_TULIP_NAPI
-#define DRV_VERSION    "1.1.14-NAPI" /* Keep at least for test */
+#define DRV_VERSION    "1.1.15-NAPI" /* Keep at least for test */
 #else
-#define DRV_VERSION	"1.1.14"
+#define DRV_VERSION	"1.1.15"
 #endif
-#define DRV_RELDATE	"May 11, 2002"
+#define DRV_RELDATE	"Feb 27, 2007"
 
 
 #include <linux/module.h>
@@ -36,8 +36,8 @@
 #include <asm/unaligned.h>
 #include <asm/uaccess.h>
 
-#ifdef __sparc__
-#include <asm/pbm.h>
+#ifdef CONFIG_SPARC
+#include <asm/prom.h>
 #endif
 
 static char version[] __devinitdata =
@@ -67,7 +67,7 @@ const char * const medianame[32] = {
 
 /* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */
 #if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \
-	|| defined(__sparc_) || defined(__ia64__) \
+	|| defined(CONFIG_SPARC) || defined(__ia64__) \
 	|| defined(__sh__) || defined(__mips__)
 static int rx_copybreak = 1518;
 #else
@@ -91,7 +91,7 @@ static int rx_copybreak = 100;
 static int csr0 = 0x01A00000 | 0xE000;
 #elif defined(__i386__) || defined(__powerpc__) || defined(__x86_64__)
 static int csr0 = 0x01A00000 | 0x8000;
-#elif defined(__sparc__) || defined(__hppa__)
+#elif defined(CONFIG_SPARC) || defined(__hppa__)
 /* The UltraSparc PCI controllers will disconnect at every 64-byte
  * crossing anyways so it makes no sense to tell Tulip to burst
  * any more than that.
@@ -1315,7 +1315,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 	/* DM9102A has troubles with MRM & clear reserved bits 24:22, 20, 16, 7:1 */
 	if (tulip_uli_dm_quirk(pdev)) {
 		csr0 &= ~0x01f100ff;
-#if defined(__sparc__)
+#if defined(CONFIG_SPARC)
                 csr0 = (csr0 & ~0xff00) | 0xe000;
 #endif
 	}
@@ -1535,23 +1535,19 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 	   Many PCI BIOSes also incorrectly report the IRQ line, so we correct
 	   that here as well. */
 	if (sum == 0  || sum == 6*0xff) {
-#if defined(__sparc__)
-		struct pcidev_cookie *pcp = pdev->sysdata;
+#if defined(CONFIG_SPARC)
+		struct device_node *dp = pci_device_to_OF_node(pdev);
+		const unsigned char *addr;
+		int len;
 #endif
 		eeprom_missing = 1;
 		for (i = 0; i < 5; i++)
 			dev->dev_addr[i] = last_phys_addr[i];
 		dev->dev_addr[i] = last_phys_addr[i] + 1;
-#if defined(__sparc__)
-		if (pcp) {
-			unsigned char *addr;
-			int len;
-
-			addr = of_get_property(pcp->prom_node,
-					       "local-mac-address", &len);
-			if (addr && len == 6)
-				memcpy(dev->dev_addr, addr, 6);
-		}
+#if defined(CONFIG_SPARC)
+		addr = of_get_property(dp, "local-mac-address", &len);
+		if (addr && len == 6)
+			memcpy(dev->dev_addr, addr, 6);
 #endif
 #if defined(__i386__) || defined(__x86_64__)	/* Patch up x86 BIOS bug. */
 		if (last_irq)
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index 229158e8e4be..ca2548eb7d63 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -583,7 +583,7 @@ static int uli526x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	/* transmit this packet */
 	txptr = db->tx_insert_ptr;
-	memcpy(txptr->tx_buf_ptr, skb->data, skb->len);
+	skb_copy_from_linear_data(skb, txptr->tx_buf_ptr, skb->len);
 	txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len);
 
 	/* Point to next transmit free descriptor */
@@ -828,14 +828,14 @@ static void uli526x_rx_packet(struct net_device *dev, struct uli526x_board_info
 					( (skb = dev_alloc_skb(rxlen + 2) )
 					!= NULL) ) {
 					/* size less than COPY_SIZE, allocate a rxlen SKB */
-					skb->dev = dev;
 					skb_reserve(skb, 2); /* 16byte align */
-					memcpy(skb_put(skb, rxlen), rxptr->rx_skb_ptr->tail, rxlen);
+					memcpy(skb_put(skb, rxlen),
+					       skb_tail_pointer(rxptr->rx_skb_ptr),
+					       rxlen);
 					uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
-				} else {
-					skb->dev = dev;
+				} else
 					skb_put(skb, rxlen);
-				}
+
 				skb->protocol = eth_type_trans(skb, dev);
 				netif_rx(skb);
 				dev->last_rx = jiffies;
@@ -1177,7 +1177,10 @@ static void uli526x_reuse_skb(struct uli526x_board_info *db, struct sk_buff * sk
 
 	if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) {
 		rxptr->rx_skb_ptr = skb;
-		rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+		rxptr->rdes2 = cpu_to_le32(pci_map_single(db->pdev,
+							  skb_tail_pointer(skb),
+							  RX_ALLOC_SIZE,
+							  PCI_DMA_FROMDEVICE));
 		wmb();
 		rxptr->rdes0 = cpu_to_le32(0x80000000);
 		db->rx_avail_cnt++;
@@ -1341,7 +1344,10 @@ static void allocate_rx_buffer(struct uli526x_board_info *db)
 		if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL )
 			break;
 		rxptr->rx_skb_ptr = skb; /* FIXME (?) */
-		rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+		rxptr->rdes2 = cpu_to_le32(pci_map_single(db->pdev,
+							  skb_tail_pointer(skb),
+							  RX_ALLOC_SIZE,
+							  PCI_DMA_FROMDEVICE));
 		wmb();
 		rxptr->rdes0 = cpu_to_le32(0x80000000);
 		rxptr = rxptr->next_rx_desc;
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index 002a05e0722f..fa440706fb4a 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -813,7 +813,6 @@ static void init_rxtx_rings(struct net_device *dev)
 		np->rx_skbuff[i] = skb;
 		if (skb == NULL)
 			break;
-		skb->dev = dev;			/* Mark as being used by this device. */
 		np->rx_addr[i] = pci_map_single(np->pci_dev,skb->data,
 					np->rx_buf_sz,PCI_DMA_FROMDEVICE);
 
@@ -903,7 +902,7 @@ static void init_registers(struct net_device *dev)
 	}
 #elif defined(__powerpc__) || defined(__i386__) || defined(__alpha__) || defined(__ia64__) || defined(__x86_64__)
 	i |= 0xE000;
-#elif defined(__sparc__) || defined (CONFIG_PARISC)
+#elif defined(CONFIG_SPARC) || defined (CONFIG_PARISC)
 	i |= 0x4800;
 #else
 #warning Processor architecture undefined
@@ -1148,7 +1147,7 @@ static irqreturn_t intr_handler(int irq, void *dev_instance)
 		}
 
 		/* Abnormal error summary/uncommon events handlers. */
-		if (intr_status & (AbnormalIntr | TxFIFOUnderflow | SytemError |
+		if (intr_status & (AbnormalIntr | TxFIFOUnderflow | SystemError |
 						   TimerInt | TxDied))
 			netdev_error(dev, intr_status);
 
@@ -1229,7 +1228,6 @@ static int netdev_rx(struct net_device *dev)
 			   to a minimally-sized skbuff. */
 			if (pkt_len < rx_copybreak
 				&& (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
-				skb->dev = dev;
 				skb_reserve(skb, 2);	/* 16 byte align the IP header */
 				pci_dma_sync_single_for_cpu(np->pci_dev,np->rx_addr[entry],
 							    np->rx_skbuff[entry]->len,
@@ -1278,7 +1276,6 @@ static int netdev_rx(struct net_device *dev)
 			np->rx_skbuff[entry] = skb;
 			if (skb == NULL)
 				break;			/* Better luck next round. */
-			skb->dev = dev;			/* Mark as being used by this device. */
 			np->rx_addr[entry] = pci_map_single(np->pci_dev,
 							skb->data,
 							np->rx_buf_sz, PCI_DMA_FROMDEVICE);
diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c
index 61d313049dd0..985a1810ca59 100644
--- a/drivers/net/tulip/xircom_cb.c
+++ b/drivers/net/tulip/xircom_cb.c
@@ -411,9 +411,9 @@ static int xircom_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			   sometimes sends more than you ask it to. */
 
 			memset(&card->tx_buffer[bufferoffsets[desc]/4],0,1536);
-			memcpy(&(card->tx_buffer[bufferoffsets[desc]/4]),skb->data,skb->len);
-
-
+			skb_copy_from_linear_data(skb,
+				  &(card->tx_buffer[bufferoffsets[desc] / 4]),
+						  skb->len);
 			/* FIXME: The specification tells us that the length we send HAS to be a multiple of
 			   4 bytes. */
 
@@ -1207,7 +1207,6 @@ static void investigate_read_descriptor(struct net_device *dev,struct xircom_pri
 				card->stats.rx_dropped++;
 				goto out;
 			}
-			skb->dev = dev;
 			skb_reserve(skb, 2);
 			eth_copy_and_sum(skb, (unsigned char*)&card->rx_buffer[bufferoffset / 4], pkt_len, 0);
 			skb_put(skb, pkt_len);
diff --git a/drivers/net/tulip/xircom_tulip_cb.c b/drivers/net/tulip/xircom_tulip_cb.c
index a998c5d0ae9c..f64172927377 100644
--- a/drivers/net/tulip/xircom_tulip_cb.c
+++ b/drivers/net/tulip/xircom_tulip_cb.c
@@ -65,7 +65,7 @@ static int rx_copybreak = 100;
 static int csr0 = 0x01A00000 | 0xE000;
 #elif defined(__powerpc__)
 static int csr0 = 0x01B00000 | 0x8000;
-#elif defined(__sparc__)
+#elif defined(CONFIG_SPARC)
 static int csr0 = 0x01B00080 | 0x8000;
 #elif defined(__i386__)
 static int csr0 = 0x01A00000 | 0x8000;
@@ -915,7 +915,9 @@ xircom_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	tp->tx_skbuff[entry] = skb;
 	if (tp->chip_id == X3201_3) {
-		memcpy(tp->tx_aligned_skbuff[entry]->data,skb->data,skb->len);
+		skb_copy_from_linear_data(skb,
+					  tp->tx_aligned_skbuff[entry]->data,
+					  skb->len);
 		tp->tx_ring[entry].buffer1 = virt_to_bus(tp->tx_aligned_skbuff[entry]->data);
 	} else
 		tp->tx_ring[entry].buffer1 = virt_to_bus(skb->data);
@@ -1238,7 +1240,6 @@ xircom_rx(struct net_device *dev)
 			   to a minimally-sized skbuff. */
 			if (pkt_len < rx_copybreak
 				&& (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
-				skb->dev = dev;
 				skb_reserve(skb, 2);	/* 16 byte align the IP header */
 #if ! defined(__alpha__)
 				eth_copy_and_sum(skb, bus_to_virt(tp->rx_ring[entry].buffer1),