Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Support ipv6 checksum offload in sunvnet driver, from Shannon
    Nelson.

 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
    Dumazet.

 3) Allow generic XDP to work on virtual devices, from John Fastabend.

 4) Add bpf device maps and XDP_REDIRECT, which can be used to build
    arbitrary switching frameworks using XDP. From John Fastabend.

 5) Remove UFO offloads from the tree, gave us little other than bugs.

 6) Remove the IPSEC flow cache, from Florian Westphal.

 7) Support ipv6 route offload in mlxsw driver.

 8) Support VF representors in bnxt_en, from Sathya Perla.

 9) Add support for forward error correction modes to ethtool, from
    Vidya Sagar Ravipati.

10) Add time filter for packet scheduler action dumping, from Jamal Hadi
    Salim.

11) Extend the zerocopy sendmsg() used by virtio and tap to regular
    sockets via MSG_ZEROCOPY. From Willem de Bruijn.

12) Significantly rework value tracking in the BPF verifier, from Edward
    Cree.

13) Add new jump instructions to eBPF, from Daniel Borkmann.

14) Rework rtnetlink plumbing so that operations can be run without
    taking the RTNL semaphore. From Florian Westphal.

15) Support XDP in tap driver, from Jason Wang.

16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.

17) Add Huawei hinic ethernet driver.

18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
    Delalande.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
  i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
  i40e: avoid NVM acquire deadlock during NVM update
  drivers: net: xgene: Remove return statement from void function
  drivers: net: xgene: Configure tx/rx delay for ACPI
  drivers: net: xgene: Read tx/rx delay for ACPI
  rocker: fix kcalloc parameter order
  rds: Fix non-atomic operation on shared flag variable
  net: sched: don't use GFP_KERNEL under spin lock
  vhost_net: correctly check tx avail during rx busy polling
  net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
  rxrpc: Make service connection lookup always check for retry
  net: stmmac: Delete dead code for MDIO registration
  gianfar: Fix Tx flow control deactivation
  cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
  cxgb4: Fix pause frame count in t4_get_port_stats
  cxgb4: fix memory leak
  tun: rename generic_xdp to skb_xdp
  tun: reserve extra headroom only when XDP is set
  net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
  net: dsa: bcm_sf2: Advertise number of egress queues
  ...

1 files changed, 106 insertions, 0 deletions

diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_map_command.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_map_command.c
new file mode 100644
index 000000000000..d1ea5e21b982
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_map_command.c
@@ -0,0 +1,106 @@
+/* Copyright (c) 2013-2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/netdevice.h>
+#include "rmnet_config.h"
+#include "rmnet_map.h"
+#include "rmnet_private.h"
+#include "rmnet_vnd.h"
+
+static u8 rmnet_map_do_flow_control(struct sk_buff *skb,
+				    struct rmnet_port *rdinfo,
+				    int enable)
+{
+	struct rmnet_map_control_command *cmd;
+	struct rmnet_endpoint *ep;
+	struct net_device *vnd;
+	u16 ip_family;
+	u16 fc_seq;
+	u32 qos_id;
+	u8 mux_id;
+	int r;
+
+	mux_id = RMNET_MAP_GET_MUX_ID(skb);
+	cmd = RMNET_MAP_GET_CMD_START(skb);
+
+	if (mux_id >= RMNET_MAX_LOGICAL_EP) {
+		kfree_skb(skb);
+		return RX_HANDLER_CONSUMED;
+	}
+
+	ep = &rdinfo->muxed_ep[mux_id];
+	vnd = ep->egress_dev;
+
+	ip_family = cmd->flow_control.ip_family;
+	fc_seq = ntohs(cmd->flow_control.flow_control_seq_num);
+	qos_id = ntohl(cmd->flow_control.qos_id);
+
+	/* Ignore the ip family and pass the sequence number for both v4 and v6
+	 * sequence. User space does not support creating dedicated flows for
+	 * the 2 protocols
+	 */
+	r = rmnet_vnd_do_flow_control(vnd, enable);
+	if (r) {
+		kfree_skb(skb);
+		return RMNET_MAP_COMMAND_UNSUPPORTED;
+	} else {
+		return RMNET_MAP_COMMAND_ACK;
+	}
+}
+
+static void rmnet_map_send_ack(struct sk_buff *skb,
+			       unsigned char type)
+{
+	struct rmnet_map_control_command *cmd;
+	int xmit_status;
+
+	skb->protocol = htons(ETH_P_MAP);
+
+	cmd = RMNET_MAP_GET_CMD_START(skb);
+	cmd->cmd_type = type & 0x03;
+
+	netif_tx_lock(skb->dev);
+	xmit_status = skb->dev->netdev_ops->ndo_start_xmit(skb, skb->dev);
+	netif_tx_unlock(skb->dev);
+}
+
+/* Process MAP command frame and send N/ACK message as appropriate. Message cmd
+ * name is decoded here and appropriate handler is called.
+ */
+rx_handler_result_t rmnet_map_command(struct sk_buff *skb,
+				      struct rmnet_port *port)
+{
+	struct rmnet_map_control_command *cmd;
+	unsigned char command_name;
+	unsigned char rc = 0;
+
+	cmd = RMNET_MAP_GET_CMD_START(skb);
+	command_name = cmd->command_name;
+
+	switch (command_name) {
+	case RMNET_MAP_COMMAND_FLOW_ENABLE:
+		rc = rmnet_map_do_flow_control(skb, port, 1);
+		break;
+
+	case RMNET_MAP_COMMAND_FLOW_DISABLE:
+		rc = rmnet_map_do_flow_control(skb, port, 0);
+		break;
+
+	default:
+		rc = RMNET_MAP_COMMAND_UNSUPPORTED;
+		kfree_skb(skb);
+		break;
+	}
+	if (rc == RMNET_MAP_COMMAND_ACK)
+		rmnet_map_send_ack(skb, rc);
+	return RX_HANDLER_CONSUMED;
+}