Merge branch 'ice-support-to-dump-phy-config-fec'

Tony Nguyen says:

====================
ice: Support to dump PHY config, FEC

Anil Samal says:

Implementation to dump PHY configuration and FEC statistics to
facilitate link level debugging of customer issues. Implementation has
two parts

a.     Serdes equalization
        # ethtool  -d eth0
        Output:
        Offset          Values
        ------          ------
        0x0000:         00 00 00 00 03 00 00 00 05 00 00 00 01 08 00 40
        0x0010:         01 00 00 40 00 00 39 3c 01 00 00 00 00 00 00 00
        0x0020:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        ...
        0x01f0:         01 00 00 00 ef be ad de 8f 00 00 00 00 00 00 00
        0x0200:         00 00 00 00 ef be ad de 00 00 00 00 00 00 00 00
        0x0210:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0x0220:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0x0230:         00 00 00 00 00 00 00 00 00 00 00 00 fa ff 00 00
        0x0240:         06 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00
        0x0250:         0f b0 0f b0 00 00 00 00 00 00 00 00 00 00 00 00
        0x0260:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0x0270:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0x0280:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0x0290:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0x02a0:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0x02b0:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0x02c0:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0x02d0:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0x02e0:         00 00 00 00 00 00 00 00 00 00 00 00
Current implementation appends 176 bytes i.e. 44 bytes * 4 serdes lane.
For port with 2 serdes lane, first 88 bytes are valid values and
remaining 88 bytes are filled with zero. Similarly for port with 1
serdes lane, first 44 bytes are valid and remaining 132 bytes are marked
zero.

Each set of serdes equalizer parameter (i.e. set of 44 bytes) follows
below order
    a. rx_equalization_pre2
    b. rx_equalization_pre1
    c. rx_equalization_post1
    d. rx_equalization_bflf
    e. rx_equalization_bfhf
    f. rx_equalization_drate
    g. tx_equalization_pre1
    h. tx_equalization_pre3
    i. tx_equalization_atten
    j. tx_equalization_post1
    k. tx_equalization_pre2
Where each individual equalizer parameter is of 4 bytes. As ethtool
prints values as individual bytes, for little endian machine these
values will be in reverse byte order.

b.    FEC block counts
        # ethtool  -I --show-fec eth0
        Output:
         FEC parameters for eth0:
        Supported/Configured FEC encodings: Auto RS BaseR
        Active FEC encoding: RS
        Statistics:
        corrected_blocks: 0
         uncorrectable_blocks: 0

This series do following:
Patch 1 - Implementation to support user provided flag for side band
queue command.
Patch 2 - Currently driver does not have a way to derive serdes lane
number, pcs quad , pcs port from port number. So we introduced a
mechanism to derive above info.
          Ethtool interface extension to include FEC statistics counter.
Patch 3 - Ethtool interface extension to include serdes equalizer output.

v1: https://lore.kernel.org/netdev/20240702180710.2606969-1-anthony.l.nguyen@intel.com/
====================

Link: https://patch.msgid.link/20240709202951.2103115-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

0 files changed, 0 insertions, 0 deletions