Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

No conflicts.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2 files changed, 30 insertions, 2 deletions

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 2e02cc68cd3f..80c5cecaf2b5 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -144,6 +144,7 @@ enum i40e_state_t {
 	__I40E_VIRTCHNL_OP_PENDING,
 	__I40E_RECOVERY_MODE,
 	__I40E_VF_RESETS_DISABLED,	/* disable resets during i40e_remove */
+	__I40E_IN_REMOVE,
 	__I40E_VFS_RELEASING,
 	/* This must be last as it determines the size of the BITMAP */
 	__I40E_STATE_SIZE__,
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index c8834765c864..f531bc1df338 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -5372,7 +5372,15 @@ static int i40e_vsi_configure_bw_alloc(struct i40e_vsi *vsi, u8 enabled_tc,
 	/* There is no need to reset BW when mqprio mode is on.  */
 	if (pf->flags & I40E_FLAG_TC_MQPRIO)
 		return 0;
-	if (!vsi->mqprio_qopt.qopt.hw && !(pf->flags & I40E_FLAG_DCB_ENABLED)) {
+
+	if (!vsi->mqprio_qopt.qopt.hw) {
+		if (pf->flags & I40E_FLAG_DCB_ENABLED)
+			goto skip_reset;
+
+		if (IS_ENABLED(CONFIG_I40E_DCB) &&
+		    i40e_dcb_hw_get_num_tc(&pf->hw) == 1)
+			goto skip_reset;
+
 		ret = i40e_set_bw_limit(vsi, vsi->seid, 0);
 		if (ret)
 			dev_info(&pf->pdev->dev,
@@ -5380,6 +5388,8 @@ static int i40e_vsi_configure_bw_alloc(struct i40e_vsi *vsi, u8 enabled_tc,
 				 vsi->seid);
 		return ret;
 	}
+
+skip_reset:
 	memset(&bw_data, 0, sizeof(bw_data));
 	bw_data.tc_valid_bits = enabled_tc;
 	for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)
@@ -10853,6 +10863,9 @@ static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit,
 				   bool lock_acquired)
 {
 	int ret;
+
+	if (test_bit(__I40E_IN_REMOVE, pf->state))
+		return;
 	/* Now we wait for GRST to settle out.
 	 * We don't have to delete the VEBs or VSIs from the hw switch
 	 * because the reset will make them disappear.
@@ -12212,6 +12225,8 @@ int i40e_reconfig_rss_queues(struct i40e_pf *pf, int queue_count)
 
 		vsi->req_queue_pairs = queue_count;
 		i40e_prep_for_reset(pf);
+		if (test_bit(__I40E_IN_REMOVE, pf->state))
+			return pf->alloc_rss_size;
 
 		pf->alloc_rss_size = new_rss_size;
 
@@ -13038,6 +13053,10 @@ static int i40e_xdp_setup(struct i40e_vsi *vsi, struct bpf_prog *prog,
 	if (need_reset)
 		i40e_prep_for_reset(pf);
 
+	/* VSI shall be deleted in a moment, just return EINVAL */
+	if (test_bit(__I40E_IN_REMOVE, pf->state))
+		return -EINVAL;
+
 	old_prog = xchg(&vsi->xdp_prog, prog);
 
 	if (need_reset) {
@@ -15925,8 +15944,13 @@ static void i40e_remove(struct pci_dev *pdev)
 	i40e_write_rx_ctl(hw, I40E_PFQF_HENA(0), 0);
 	i40e_write_rx_ctl(hw, I40E_PFQF_HENA(1), 0);
 
-	while (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state))
+	/* Grab __I40E_RESET_RECOVERY_PENDING and set __I40E_IN_REMOVE
+	 * flags, once they are set, i40e_rebuild should not be called as
+	 * i40e_prep_for_reset always returns early.
+	 */
+	while (test_and_set_bit(__I40E_RESET_RECOVERY_PENDING, pf->state))
 		usleep_range(1000, 2000);
+	set_bit(__I40E_IN_REMOVE, pf->state);
 
 	if (pf->flags & I40E_FLAG_SRIOV_ENABLED) {
 		set_bit(__I40E_VF_RESETS_DISABLED, pf->state);
@@ -16125,6 +16149,9 @@ static void i40e_pci_error_reset_done(struct pci_dev *pdev)
 {
 	struct i40e_pf *pf = pci_get_drvdata(pdev);
 
+	if (test_bit(__I40E_IN_REMOVE, pf->state))
+		return;
+
 	i40e_reset_and_rebuild(pf, false, false);
 }