Merge drm/drm-next into drm-intel-next-queued

We need a backmerge to get DP_DPCD_REV_14 before we push other
i915 changes to dinq that could break compilation.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

1 files changed, 23 insertions, 40 deletions

diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index c0a3dae8a2db..eb2d1530d331 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -1,29 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
-/*******************************************************************************
- *
- * Intel Ethernet Controller XL710 Family Linux Driver
- * Copyright(c) 2013 - 2016 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
- *
- * Contact Information:
- * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- ******************************************************************************/
+/* Copyright(c) 2013 - 2018 Intel Corporation. */
 
 #include "i40e_type.h"
 #include "i40e_adminq.h"
@@ -1695,6 +1671,8 @@ enum i40e_status_code i40e_aq_set_phy_config(struct i40e_hw *hw,
 /**
  * i40e_set_fc
  * @hw: pointer to the hw struct
+ * @aq_failures: buffer to return AdminQ failure information
+ * @atomic_restart: whether to enable atomic link restart
  *
  * Set the requested flow control mode using set_phy_config.
  **/
@@ -2831,8 +2809,8 @@ i40e_status i40e_aq_remove_macvlan(struct i40e_hw *hw, u16 seid,
  * @mr_list: list of mirrored VSI SEIDs or VLAN IDs
  * @cmd_details: pointer to command details structure or NULL
  * @rule_id: Rule ID returned from FW
- * @rule_used: Number of rules used in internal switch
- * @rule_free: Number of rules free in internal switch
+ * @rules_used: Number of rules used in internal switch
+ * @rules_free: Number of rules free in internal switch
  *
  * Add/Delete a mirror rule to a specific switch. Mirror rules are supported for
  * VEBs/VEPA elements only
@@ -2892,8 +2870,8 @@ static i40e_status i40e_mirrorrule_op(struct i40e_hw *hw,
  * @mr_list: list of mirrored VSI SEIDs or VLAN IDs
  * @cmd_details: pointer to command details structure or NULL
  * @rule_id: Rule ID returned from FW
- * @rule_used: Number of rules used in internal switch
- * @rule_free: Number of rules free in internal switch
+ * @rules_used: Number of rules used in internal switch
+ * @rules_free: Number of rules free in internal switch
  *
  * Add mirror rule. Mirror rules are supported for VEBs or VEPA elements only
  **/
@@ -2923,8 +2901,8 @@ i40e_status i40e_aq_add_mirrorrule(struct i40e_hw *hw, u16 sw_seid,
  *		add_mirrorrule.
  * @mr_list: list of mirrored VLAN IDs to be removed
  * @cmd_details: pointer to command details structure or NULL
- * @rule_used: Number of rules used in internal switch
- * @rule_free: Number of rules free in internal switch
+ * @rules_used: Number of rules used in internal switch
+ * @rules_free: Number of rules free in internal switch
  *
  * Delete a mirror rule. Mirror rules are supported for VEBs/VEPA elements only
  **/
@@ -3672,6 +3650,8 @@ i40e_status i40e_aq_stop_lldp(struct i40e_hw *hw, bool shutdown_agent,
 /**
  * i40e_aq_start_lldp
  * @hw: pointer to the hw struct
+ * @buff: buffer for result
+ * @buff_size: buffer size
  * @cmd_details: pointer to command details structure or NULL
  *
  * Start the embedded LLDP Agent on all ports.
@@ -3752,7 +3732,6 @@ i40e_status i40e_aq_get_cee_dcb_config(struct i40e_hw *hw,
  * i40e_aq_add_udp_tunnel
  * @hw: pointer to the hw struct
  * @udp_port: the UDP port to add in Host byte order
- * @header_len: length of the tunneling header length in DWords
  * @protocol_index: protocol index type
  * @filter_index: pointer to filter index
  * @cmd_details: pointer to command details structure or NULL
@@ -3971,6 +3950,7 @@ i40e_status i40e_aq_config_vsi_tc_bw(struct i40e_hw *hw,
  * @hw: pointer to the hw struct
  * @seid: seid of the switching component connected to Physical Port
  * @ets_data: Buffer holding ETS parameters
+ * @opcode: Tx scheduler AQ command opcode
  * @cmd_details: pointer to command details structure or NULL
  **/
 i40e_status i40e_aq_config_switch_comp_ets(struct i40e_hw *hw,
@@ -4314,10 +4294,10 @@ i40e_status i40e_aq_add_rem_control_packet_filter(struct i40e_hw *hw,
  * @hw: pointer to the hw struct
  * @seid: VSI seid to add ethertype filter from
  **/
-#define I40E_FLOW_CONTROL_ETHTYPE 0x8808
 void i40e_add_filter_to_drop_tx_flow_control_frames(struct i40e_hw *hw,
 						    u16 seid)
 {
+#define I40E_FLOW_CONTROL_ETHTYPE 0x8808
 	u16 flag = I40E_AQC_ADD_CONTROL_PACKET_FLAGS_IGNORE_MAC |
 		   I40E_AQC_ADD_CONTROL_PACKET_FLAGS_DROP |
 		   I40E_AQC_ADD_CONTROL_PACKET_FLAGS_TX;
@@ -4448,6 +4428,7 @@ void i40e_set_pci_config_data(struct i40e_hw *hw, u16 link_status)
  * @ret_buff_size: actual buffer size returned
  * @ret_next_table: next block to read
  * @ret_next_index: next index to read
+ * @cmd_details: pointer to command details structure or NULL
  *
  * Dump internal FW/HW data for debug purposes.
  *
@@ -4574,7 +4555,7 @@ i40e_status i40e_aq_configure_partition_bw(struct i40e_hw *hw,
  * i40e_read_phy_register_clause22
  * @hw: pointer to the HW structure
  * @reg: register address in the page
- * @phy_adr: PHY address on MDIO interface
+ * @phy_addr: PHY address on MDIO interface
  * @value: PHY register value
  *
  * Reads specified PHY register value
@@ -4619,7 +4600,7 @@ i40e_status i40e_read_phy_register_clause22(struct i40e_hw *hw,
  * i40e_write_phy_register_clause22
  * @hw: pointer to the HW structure
  * @reg: register address in the page
- * @phy_adr: PHY address on MDIO interface
+ * @phy_addr: PHY address on MDIO interface
  * @value: PHY register value
  *
  * Writes specified PHY register value
@@ -4660,7 +4641,7 @@ i40e_status i40e_write_phy_register_clause22(struct i40e_hw *hw,
  * @hw: pointer to the HW structure
  * @page: registers page number
  * @reg: register address in the page
- * @phy_adr: PHY address on MDIO interface
+ * @phy_addr: PHY address on MDIO interface
  * @value: PHY register value
  *
  * Reads specified PHY register value
@@ -4734,7 +4715,7 @@ phy_read_end:
  * @hw: pointer to the HW structure
  * @page: registers page number
  * @reg: register address in the page
- * @phy_adr: PHY address on MDIO interface
+ * @phy_addr: PHY address on MDIO interface
  * @value: PHY register value
  *
  * Writes value to specified PHY register
@@ -4801,7 +4782,7 @@ phy_write_end:
  * @hw: pointer to the HW structure
  * @page: registers page number
  * @reg: register address in the page
- * @phy_adr: PHY address on MDIO interface
+ * @phy_addr: PHY address on MDIO interface
  * @value: PHY register value
  *
  * Writes value to specified PHY register
@@ -4837,7 +4818,7 @@ i40e_status i40e_write_phy_register(struct i40e_hw *hw,
  * @hw: pointer to the HW structure
  * @page: registers page number
  * @reg: register address in the page
- * @phy_adr: PHY address on MDIO interface
+ * @phy_addr: PHY address on MDIO interface
  * @value: PHY register value
  *
  * Reads specified PHY register value
@@ -4872,7 +4853,6 @@ i40e_status i40e_read_phy_register(struct i40e_hw *hw,
  * i40e_get_phy_address
  * @hw: pointer to the HW structure
  * @dev_num: PHY port num that address we want
- * @phy_addr: Returned PHY address
  *
  * Gets PHY address for current port
  **/
@@ -5082,7 +5062,9 @@ i40e_status i40e_led_get_phy(struct i40e_hw *hw, u16 *led_addr,
  * i40e_led_set_phy
  * @hw: pointer to the HW structure
  * @on: true or false
+ * @led_addr: address of led register to use
  * @mode: original val plus bit for set or ignore
+ *
  * Set led's on or off when controlled by the PHY
  *
  **/
@@ -5371,6 +5353,7 @@ i40e_status_code i40e_aq_write_ddp(struct i40e_hw *hw, void *buff,
  * @hw: pointer to the hw struct
  * @buff: command buffer (size in bytes = buff_size)
  * @buff_size: buffer size in bytes
+ * @flags: AdminQ command flags
  * @cmd_details: pointer to command details structure or NULL
  **/
 enum