diff options
| author | Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> | 2024-06-21 16:43:22 +0200 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2024-06-23 10:06:58 +0100 |
| commit | bf1bff11e497a01b0cc6cb2afcff734340ae95f8 (patch) | |
| tree | 19519e3b3014daf32dbe22c7bca3019e7b9eae3d /drivers/net/dsa/microchip/ksz_common.c | |
| parent | d963c95bc9840d070a788c35e41b715a648717f7 (diff) | |
net: dsa: microchip: monitor potential faults in half-duplex mode
The errata DS80000754 recommends monitoring potential faults in
half-duplex mode for the KSZ9477 family.
half-duplex is not very common so I just added a critical message
when the fault conditions are detected. The switch can be expected
to be unable to communicate anymore in these states and a software
reset of the switch would be required which I did not implement.
Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/dsa/microchip/ksz_common.c')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz_common.c | 11 |
1 files changed, 11 insertions, 0 deletions
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 2818e24e2a51..0433109b42e5 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -1382,6 +1382,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .tc_cbs_supported = true, .ops = &ksz9477_dev_ops, .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .phy_errata_9477 = true, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1416,6 +1417,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .num_ipms = 8, .ops = &ksz9477_dev_ops, .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .phy_errata_9477 = true, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1450,6 +1452,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .num_ipms = 8, .ops = &ksz9477_dev_ops, .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .phy_errata_9477 = true, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1540,6 +1543,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .tc_cbs_supported = true, .ops = &ksz9477_dev_ops, .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .phy_errata_9477 = true, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1820,6 +1824,7 @@ void ksz_r_mib_stats64(struct ksz_device *dev, int port) struct rtnl_link_stats64 *stats; struct ksz_stats_raw *raw; struct ksz_port_mib *mib; + int ret; mib = &dev->ports[port].mib; stats = &mib->stats64; @@ -1861,6 +1866,12 @@ void ksz_r_mib_stats64(struct ksz_device *dev, int port) pstats->rx_pause_frames = raw->rx_pause; spin_unlock(&mib->stats64_lock); + + if (dev->info->phy_errata_9477) { + ret = ksz9477_errata_monitor(dev, port, raw->tx_late_col); + if (ret) + dev_err(dev->dev, "Failed to monitor transmission halt\n"); + } } void ksz88xx_r_mib_stats64(struct ksz_device *dev, int port) |