Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:

 - fix failure to add bond interfaces to a bridge, the offload-handling
   code was too defensive there and recent refactoring unearthed that.
   Users complained (Ido)

 - fix unnecessarily reflecting ECN bits within TOS values / QoS marking
   in TCP ACK and reset packets (Wei)

 - fix a deadlock with bpf iterator. Hopefully we're in the clear on
   this front now... (Yonghong)

 - BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel)

 - fix AQL on mt76 devices with FW rate control and add a couple of AQL
   issues in mac80211 code (Felix)

 - fix authentication issue with mwifiex (Maximilian)

 - WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro)

 - fix exception handling for multipath routes via same device (David
   Ahern)

 - revert back to a BH spin lock flavor for nsid_lock: there are paths
   which do require the BH context protection (Taehee)

 - fix interrupt / queue / NAPI handling in the lantiq driver (Hauke)

 - fix ife module load deadlock (Cong)

 - make an adjustment to netlink reply message type for code added in
   this release (the sole change touching uAPI here) (Michal)

 - a number of fixes for small NXP and Microchip switches (Vladimir)

[ Pull request acked by David: "you can expect more of this in the
  future as I try to delegate more things to Jakub" ]

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits)
  net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
  net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
  net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
  inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute
  net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU
  net: Update MAINTAINERS for MediaTek switch driver
  net/mlx5e: mlx5e_fec_in_caps() returns a boolean
  net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock
  net/mlx5e: kTLS, Fix leak on resync error flow
  net/mlx5e: kTLS, Add missing dma_unmap in RX resync
  net/mlx5e: kTLS, Fix napi sync and possible use-after-free
  net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported
  net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats()
  net/mlx5e: Fix multicast counter not up-to-date in "ip -s"
  net/mlx5e: Fix endianness when calculating pedit mask first bit
  net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported
  net/mlx5e: CT: Fix freeing ct_label mapping
  net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready
  net/mlx5e: Use synchronize_rcu to sync with NAPI
  net/mlx5e: Use RCU to protect rq->xdp_prog
  ...

1 files changed, 19 insertions, 10 deletions

diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 3cb22d149813..2f5506ac7d19 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -1208,7 +1208,7 @@ static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 
 		/* configure MAC to 1G & RGMII mode */
 		ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
-		switch (dev->interface) {
+		switch (p->interface) {
 		case PHY_INTERFACE_MODE_MII:
 			ksz9477_set_xmii(dev, 0, &data8);
 			ksz9477_set_gbit(dev, false, &data8);
@@ -1229,11 +1229,11 @@ static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 			ksz9477_set_gbit(dev, true, &data8);
 			data8 &= ~PORT_RGMII_ID_IG_ENABLE;
 			data8 &= ~PORT_RGMII_ID_EG_ENABLE;
-			if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
-			    dev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+			if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+			    p->interface == PHY_INTERFACE_MODE_RGMII_RXID)
 				data8 |= PORT_RGMII_ID_IG_ENABLE;
-			if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
-			    dev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+			if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+			    p->interface == PHY_INTERFACE_MODE_RGMII_TXID)
 				data8 |= PORT_RGMII_ID_EG_ENABLE;
 			p->phydev.speed = SPEED_1000;
 			break;
@@ -1269,23 +1269,32 @@ static void ksz9477_config_cpu_port(struct dsa_switch *ds)
 			dev->cpu_port = i;
 			dev->host_mask = (1 << dev->cpu_port);
 			dev->port_mask |= dev->host_mask;
+			p = &dev->ports[i];
 
 			/* Read from XMII register to determine host port
 			 * interface.  If set specifically in device tree
 			 * note the difference to help debugging.
 			 */
 			interface = ksz9477_get_interface(dev, i);
-			if (!dev->interface)
-				dev->interface = interface;
-			if (interface && interface != dev->interface)
+			if (!p->interface) {
+				if (dev->compat_interface) {
+					dev_warn(dev->dev,
+						 "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. "
+						 "Please update your device tree.\n",
+						 i);
+					p->interface = dev->compat_interface;
+				} else {
+					p->interface = interface;
+				}
+			}
+			if (interface && interface != p->interface)
 				dev_info(dev->dev,
 					 "use %s instead of %s\n",
-					  phy_modes(dev->interface),
+					  phy_modes(p->interface),
 					  phy_modes(interface));
 
 			/* enable cpu port */
 			ksz9477_port_setup(dev, i, true);
-			p = &dev->ports[dev->cpu_port];
 			p->vid_member = dev->port_mask;
 			p->on = 1;
 		}