Merge tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - v4l core: subdev frame interval now supports which field

 - v4l kapi: moves and renames the init_cfg pad op to init_state as an
   internal op.

 - new sensor drivers: gc0308, gc2145, Avnet Alvium, ov64a40, tw9900

 - new camera driver: STM32 DCMIPP

 - s5p-mfc has gained MFC v12 support

 - new ISP driver added to staging: Starfive

 - new stateful encoder/decoded: Wave5 codec It is found on the J721S2
   SoC, JH7100 SoC, ssd202d SoC. Etc.

 - fwnode gained support for MIPI "DisCo for Imaging"
   (https://www.mipi.org/specifications/mipi-disco-imaging)

 - as usual, lots of cleanups, fixups and driver improvements.

* tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (309 commits)
  media: i2c: thp7312: select CONFIG_FW_LOADER
  media: i2c: mt9m114: use fsleep() in place of udelay()
  media: videobuf2: core: Rename min_buffers_needed field in vb2_queue
  media: i2c: thp7312: Store frame interval in subdev state
  media: docs: uAPI: Fix documentation of 'which' field for routing ioctls
  media: docs: uAPI: Expand error documentation for invalid 'which' value
  media: docs: uAPI: Clarify error documentation for invalid 'which' value
  media: v4l2-subdev: Store frame interval in subdev state
  media: v4l2-subdev: Add which field to struct v4l2_subdev_frame_interval
  media: v4l2-subdev: Turn .[gs]_frame_interval into pad operations
  media: v4l: subdev: Move out subdev state lock macros outside CONFIG_MEDIA_CONTROLLER
  media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF
  media: s5p-mfc: Load firmware for each run in MFCv12.
  media: s5p-mfc: Set context for valid case before calling try_run
  media: s5p-mfc: Add support for DMABUF for encoder
  media: s5p-mfc: Add support for UHD encoding.
  media: s5p-mfc: Add support for rate controls in MFCv12
  media: s5p-mfc: Add YV12 and I420 multiplanar format support
  media: s5p-mfc: Add initial support for MFCv12
  media: s5p-mfc: Rename IS_MFCV10 macro
  ...

1 files changed, 1 insertions, 40 deletions

diff --git a/drivers/media/platform/microchip/microchip-isc-base.c b/drivers/media/platform/microchip/microchip-isc-base.c
index 1f8528844497..f3a5cbacadbe 100644
--- a/drivers/media/platform/microchip/microchip-isc-base.c
+++ b/drivers/media/platform/microchip/microchip-isc-base.c
@@ -851,38 +851,6 @@ static int isc_try_configure_pipeline(struct isc_device *isc)
 	return 0;
 }
 
-static void isc_try_fse(struct isc_device *isc,
-			struct v4l2_subdev_state *sd_state)
-{
-	struct v4l2_subdev_frame_size_enum fse = {
-		.which = V4L2_SUBDEV_FORMAT_TRY,
-	};
-	int ret;
-
-	/*
-	 * If we do not know yet which format the subdev is using, we cannot
-	 * do anything.
-	 */
-	if (!isc->config.sd_format)
-		return;
-
-	fse.code = isc->try_config.sd_format->mbus_code;
-
-	ret = v4l2_subdev_call(isc->current_subdev->sd, pad, enum_frame_size,
-			       sd_state, &fse);
-	/*
-	 * Attempt to obtain format size from subdev. If not available,
-	 * just use the maximum ISC can receive.
-	 */
-	if (ret) {
-		sd_state->pads->try_crop.width = isc->max_width;
-		sd_state->pads->try_crop.height = isc->max_height;
-	} else {
-		sd_state->pads->try_crop.width = fse.max_width;
-		sd_state->pads->try_crop.height = fse.max_height;
-	}
-}
-
 static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f)
 {
 	struct v4l2_pix_format *pixfmt = &f->fmt.pix;
@@ -944,10 +912,6 @@ static int isc_validate(struct isc_device *isc)
 		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
 		.pad = isc->remote_pad,
 	};
-	struct v4l2_subdev_pad_config pad_cfg = {};
-	struct v4l2_subdev_state pad_state = {
-		.pads = &pad_cfg,
-	};
 
 	/* Get current format from subdev */
 	ret = v4l2_subdev_call(isc->current_subdev->sd, pad, get_fmt, NULL,
@@ -1008,9 +972,6 @@ static int isc_validate(struct isc_device *isc)
 	if (ret)
 		return ret;
 
-	/* Obtain frame sizes if possible to have crop requirements ready */
-	isc_try_fse(isc, &pad_state);
-
 	/* Configure ISC pipeline for the config */
 	ret = isc_try_configure_pipeline(isc);
 	if (ret)
@@ -1819,7 +1780,7 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
 	q->mem_ops		= &vb2_dma_contig_memops;
 	q->timestamp_flags	= V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
 	q->lock			= &isc->lock;
-	q->min_buffers_needed	= 1;
+	q->min_queued_buffers	= 1;
 	q->dev			= isc->dev;
 
 	ret = vb2_queue_init(q);