md: Set MD_BROKEN for RAID1 and RAID10

There is no direct mechanism to determine raid failure outside
personality. It is done by checking rdev->flags after executing
md_error(). If "faulty" flag is not set then -EBUSY is returned to
userspace. -EBUSY means that array will be failed after drive removal.

Mdadm has special routine to handle the array failure and it is executed
if -EBUSY is returned by md.

There are at least two known reasons to not consider this mechanism
as correct:
1. drive can be removed even if array will be failed[1].
2. -EBUSY seems to be wrong status. Array is not busy, but removal
   process cannot proceed safe.

-EBUSY expectation cannot be removed without breaking compatibility
with userspace. In this patch first issue is resolved by adding support
for MD_BROKEN flag for RAID1 and RAID10. Support for RAID456 is added in
next commit.

The idea is to set the MD_BROKEN if we are sure that raid is in failed
state now. This is done in each error_handler(). In md_error() MD_BROKEN
flag is checked. If is set, then -EBUSY is returned to userspace.

As in previous commit, it causes that #mdadm --set-faulty is able to
fail array. Previously proposed workaround is valid if optional
functionality[1] is disabled.

[1] commit 9a567843f7ce("md: allow last device to be forcibly removed from
    RAID1/RAID10.")

Reviewd-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Song Liu <song@kernel.org>

1 files changed, 26 insertions, 17 deletions

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 5aed2c8b746e..99d5af1362d7 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1641,30 +1641,39 @@ static void raid1_status(struct seq_file *seq, struct mddev *mddev)
 	seq_printf(seq, "]");
 }
 
+/**
+ * raid1_error() - RAID1 error handler.
+ * @mddev: affected md device.
+ * @rdev: member device to fail.
+ *
+ * The routine acknowledges &rdev failure and determines new @mddev state.
+ * If it failed, then:
+ *	- &MD_BROKEN flag is set in &mddev->flags.
+ *	- recovery is disabled.
+ * Otherwise, it must be degraded:
+ *	- recovery is interrupted.
+ *	- &mddev->degraded is bumped.
+ *
+ * @rdev is marked as &Faulty excluding case when array is failed and
+ * &mddev->fail_last_dev is off.
+ */
 static void raid1_error(struct mddev *mddev, struct md_rdev *rdev)
 {
 	char b[BDEVNAME_SIZE];
 	struct r1conf *conf = mddev->private;
 	unsigned long flags;
 
-	/*
-	 * If it is not operational, then we have already marked it as dead
-	 * else if it is the last working disks with "fail_last_dev == false",
-	 * ignore the error, let the next level up know.
-	 * else mark the drive as failed
-	 */
 	spin_lock_irqsave(&conf->device_lock, flags);
-	if (test_bit(In_sync, &rdev->flags) && !mddev->fail_last_dev
-	    && (conf->raid_disks - mddev->degraded) == 1) {
-		/*
-		 * Don't fail the drive, act as though we were just a
-		 * normal single drive.
-		 * However don't try a recovery from this drive as
-		 * it is very likely to fail.
-		 */
-		conf->recovery_disabled = mddev->recovery_disabled;
-		spin_unlock_irqrestore(&conf->device_lock, flags);
-		return;
+
+	if (test_bit(In_sync, &rdev->flags) &&
+	    (conf->raid_disks - mddev->degraded) == 1) {
+		set_bit(MD_BROKEN, &mddev->flags);
+
+		if (!mddev->fail_last_dev) {
+			conf->recovery_disabled = mddev->recovery_disabled;
+			spin_unlock_irqrestore(&conf->device_lock, flags);
+			return;
+		}
 	}
 	set_bit(Blocked, &rdev->flags);
 	if (test_and_clear_bit(In_sync, &rdev->flags))