Merge tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block

Pull libata updates from Jens Axboe:
 "The big change in this round is that we're finally in a position where
  we can sanely remove the old drivers/ide/ code, as libata covers
  everything we need by now.

  This is exciting for two reasons:

   1) we delete a lot of legacy code that doesn't really meet the
      standards we have today, and

   2) it enables us to clean up various bits in the block layer that
      exist only because of the old IDE code.

  Outside of that, just a few minor fixes here, fixups for warnings,
  etc"

* tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block: (29 commits)
  ata: rb532_cf: remove redundant codes
  ide: remove the legacy ide driver
  m68k: use libata instead of the legacy ide driver
  ARM: disable CONFIG_IDE in pxa_defconfig
  ARM: disable CONFIG_IDE in footbridge_defconfig
  alpha: use libata instead of the legacy ide driver
  pata_cypress: add a module option to disable BM-DMA
  ata: pata_macio: Avoid overwriting initialised field in 'pata_macio_sht'
  ata: pata_serverworks: Avoid overwriting initialised field in 'serverworks_osb4_sht
  ata: pata_sc1200: sc1200_sht'Avoid overwriting initialised field in '
  ata: pata_cs5530: Avoid overwriting initialised field in 'cs5530_sht'
  ata: pata_cs5520: Avoid overwriting initialised field in 'cs5520_sht'
  ata: pata_atiixp: Avoid overwriting initialised field in 'atiixp_sht'
  ata: sata_nv: Do not over-write initialise fields in 'nv_adma_sht' and 'nv_swncq_sht'
  ata: sata_mv: Do not over-write initialise fields in 'mv6_sht'
  ata: sata_sil24: Do not over-write initialise fields in 'sil24_sht'
  ata: ahci: Ensure initialised fields are not overwritten in AHCI_SHT()
  ata: include: libata: Move fields commonly over-written to separate MACRO
  ahci: Add support for Dell S140 and later controllers
  ata: ahci_sunxi: Disable DIPM
  ...

1 files changed, 0 insertions, 100 deletions

diff --git a/drivers/ide/rz1000.c b/drivers/ide/rz1000.c
deleted file mode 100644
index fce2b7de5a19..000000000000
--- a/drivers/ide/rz1000.c
+++ /dev/null
@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 1995-1998  Linus Torvalds & author (see below)
- */
-
-/*
- *  Principal Author:  [email protected] (Mark Lord)
- *
- *  See linux/MAINTAINERS for address of current maintainer.
- *
- *  This file provides support for disabling the buggy read-ahead
- *  mode of the RZ1000 IDE chipset, commonly used on Intel motherboards.
- *
- *  Dunno if this fixes both ports, or only the primary port (?).
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define DRV_NAME "rz1000"
-
-static int rz1000_disable_readahead(struct pci_dev *dev)
-{
-	u16 reg;
-
-	if (!pci_read_config_word (dev, 0x40, &reg) &&
-	    !pci_write_config_word(dev, 0x40, reg & 0xdfff)) {
-		printk(KERN_INFO "%s: disabled chipset read-ahead "
-			"(buggy RZ1000/RZ1001)\n", pci_name(dev));
-		return 0;
-	} else {
-		printk(KERN_INFO "%s: serialized, disabled unmasking "
-			"(buggy RZ1000/RZ1001)\n", pci_name(dev));
-		return 1;
-	}
-}
-
-static const struct ide_port_info rz1000_chipset = {
-	.name		= DRV_NAME,
-	.host_flags	= IDE_HFLAG_NO_DMA,
-};
-
-static int rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
-	struct ide_port_info d = rz1000_chipset;
-	int rc;
-
-	rc = pci_enable_device(dev);
-	if (rc)
-		return rc;
-
-	if (rz1000_disable_readahead(dev)) {
-		d.host_flags |= IDE_HFLAG_SERIALIZE;
-		d.host_flags |= IDE_HFLAG_NO_UNMASK_IRQS;
-	}
-
-	return ide_pci_init_one(dev, &d, NULL);
-}
-
-static void rz1000_remove(struct pci_dev *dev)
-{
-	ide_pci_remove(dev);
-	pci_disable_device(dev);
-}
-
-static const struct pci_device_id rz1000_pci_tbl[] = {
-	{ PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000), 0 },
-	{ PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001), 0 },
-	{ 0, },
-};
-MODULE_DEVICE_TABLE(pci, rz1000_pci_tbl);
-
-static struct pci_driver rz1000_pci_driver = {
-	.name		= "RZ1000_IDE",
-	.id_table	= rz1000_pci_tbl,
-	.probe		= rz1000_init_one,
-	.remove		= rz1000_remove,
-};
-
-static int __init rz1000_ide_init(void)
-{
-	return ide_pci_register_driver(&rz1000_pci_driver);
-}
-
-static void __exit rz1000_ide_exit(void)
-{
-	pci_unregister_driver(&rz1000_pci_driver);
-}
-
-module_init(rz1000_ide_init);
-module_exit(rz1000_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for RZ1000 IDE");
-MODULE_LICENSE("GPL");
-