Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	drivers/usb/input/Makefile
	drivers/usb/input/gtco.c

1 files changed, 39 insertions, 14 deletions

diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 2614f41b5074..8670112f1d39 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -226,7 +226,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
 			break;
 		if (drive->hwif->ide_dma_check == NULL)
 			break;
-		drive->hwif->ide_dma_check(drive);
+		ide_set_dma(drive);
 		break;
 	}
 	pm->pm_step = ide_pm_state_completed;
@@ -519,21 +519,24 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8
 	if ((stat & DRQ_STAT) && rq_data_dir(rq) == READ && hwif->err_stops_fifo == 0)
 		try_to_flush_leftover_data(drive);
 
+	if (rq->errors >= ERROR_MAX || blk_noretry_request(rq)) {
+		ide_kill_rq(drive, rq);
+		return ide_stopped;
+	}
+
 	if (hwif->INB(IDE_STATUS_REG) & (BUSY_STAT|DRQ_STAT))
-		/* force an abort */
-		hwif->OUTB(WIN_IDLEIMMEDIATE, IDE_COMMAND_REG);
+		rq->errors |= ERROR_RESET;
 
-	if (rq->errors >= ERROR_MAX || blk_noretry_request(rq))
-		ide_kill_rq(drive, rq);
-	else {
-		if ((rq->errors & ERROR_RESET) == ERROR_RESET) {
-			++rq->errors;
-			return ide_do_reset(drive);
-		}
-		if ((rq->errors & ERROR_RECAL) == ERROR_RECAL)
-			drive->special.b.recalibrate = 1;
+	if ((rq->errors & ERROR_RESET) == ERROR_RESET) {
 		++rq->errors;
+		return ide_do_reset(drive);
 	}
+
+	if ((rq->errors & ERROR_RECAL) == ERROR_RECAL)
+		drive->special.b.recalibrate = 1;
+
+	++rq->errors;
+
 	return ide_stopped;
 }
 
@@ -1025,6 +1028,13 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
 	if (!drive->special.all) {
 		ide_driver_t *drv;
 
+		/*
+		 * We reset the drive so we need to issue a SETFEATURES.
+		 * Do it _after_ do_special() restored device parameters.
+		 */
+		if (drive->current_speed == 0xff)
+			ide_config_drive_speed(drive, drive->desired_speed);
+
 		if (rq->cmd_type == REQ_TYPE_ATA_CMD ||
 		    rq->cmd_type == REQ_TYPE_ATA_TASK ||
 		    rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
@@ -1216,6 +1226,7 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
 #endif
 				/* so that ide_timer_expiry knows what to do */
 				hwgroup->sleeping = 1;
+				hwgroup->req_gen_timer = hwgroup->req_gen;
 				mod_timer(&hwgroup->timer, sleep);
 				/* we purposely leave hwgroup->busy==1
 				 * while sleeping */
@@ -1351,7 +1362,7 @@ static ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error)
 	 */
 	drive->retry_pio++;
 	drive->state = DMA_PIO_RETRY;
-	(void) hwif->ide_dma_off_quietly(drive);
+	hwif->dma_off_quietly(drive);
 
 	/*
 	 * un-busy drive etc (hwgroup->busy is cleared on return) and
@@ -1401,7 +1412,8 @@ void ide_timer_expiry (unsigned long data)
 
 	spin_lock_irqsave(&ide_lock, flags);
 
-	if ((handler = hwgroup->handler) == NULL) {
+	if (((handler = hwgroup->handler) == NULL) ||
+	    (hwgroup->req_gen != hwgroup->req_gen_timer)) {
 		/*
 		 * Either a marginal timeout occurred
 		 * (got the interrupt just as timer expired),
@@ -1429,6 +1441,7 @@ void ide_timer_expiry (unsigned long data)
 				if ((wait = expiry(drive)) > 0) {
 					/* reset timer */
 					hwgroup->timer.expires  = jiffies + wait;
+					hwgroup->req_gen_timer = hwgroup->req_gen;
 					add_timer(&hwgroup->timer);
 					spin_unlock_irqrestore(&ide_lock, flags);
 					return;
@@ -1643,9 +1656,21 @@ irqreturn_t ide_intr (int irq, void *dev_id)
 		printk(KERN_ERR "%s: ide_intr: hwgroup->busy was 0 ??\n", drive->name);
 	}
 	hwgroup->handler = NULL;
+	hwgroup->req_gen++;
 	del_timer(&hwgroup->timer);
 	spin_unlock(&ide_lock);
 
+	/* Some controllers might set DMA INTR no matter DMA or PIO;
+	 * bmdma status might need to be cleared even for
+	 * PIO interrupts to prevent spurious/lost irq.
+	 */
+	if (hwif->ide_dma_clear_irq && !(drive->waiting_for_dma))
+		/* ide_dma_end() needs bmdma status for error checking.
+		 * So, skip clearing bmdma status here and leave it
+		 * to ide_dma_end() if this is dma interrupt.
+		 */
+		hwif->ide_dma_clear_irq(drive);
+
 	if (drive->unmask)
 		local_irq_enable_in_hardirq();
 	/* service this interrupt, may set handler for next interrupt */