Merge tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block

Pull libata updates from Jens Axboe:
 "The big change in this round is that we're finally in a position where
  we can sanely remove the old drivers/ide/ code, as libata covers
  everything we need by now.

  This is exciting for two reasons:

   1) we delete a lot of legacy code that doesn't really meet the
      standards we have today, and

   2) it enables us to clean up various bits in the block layer that
      exist only because of the old IDE code.

  Outside of that, just a few minor fixes here, fixups for warnings,
  etc"

* tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block: (29 commits)
  ata: rb532_cf: remove redundant codes
  ide: remove the legacy ide driver
  m68k: use libata instead of the legacy ide driver
  ARM: disable CONFIG_IDE in pxa_defconfig
  ARM: disable CONFIG_IDE in footbridge_defconfig
  alpha: use libata instead of the legacy ide driver
  pata_cypress: add a module option to disable BM-DMA
  ata: pata_macio: Avoid overwriting initialised field in 'pata_macio_sht'
  ata: pata_serverworks: Avoid overwriting initialised field in 'serverworks_osb4_sht
  ata: pata_sc1200: sc1200_sht'Avoid overwriting initialised field in '
  ata: pata_cs5530: Avoid overwriting initialised field in 'cs5530_sht'
  ata: pata_cs5520: Avoid overwriting initialised field in 'cs5520_sht'
  ata: pata_atiixp: Avoid overwriting initialised field in 'atiixp_sht'
  ata: sata_nv: Do not over-write initialise fields in 'nv_adma_sht' and 'nv_swncq_sht'
  ata: sata_mv: Do not over-write initialise fields in 'mv6_sht'
  ata: sata_sil24: Do not over-write initialise fields in 'sil24_sht'
  ata: ahci: Ensure initialised fields are not overwritten in AHCI_SHT()
  ata: include: libata: Move fields commonly over-written to separate MACRO
  ahci: Add support for Dell S140 and later controllers
  ata: ahci_sunxi: Disable DIPM
  ...

1 files changed, 0 insertions, 234 deletions

diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c
deleted file mode 100644
index bc01660ee8fd..000000000000
--- a/drivers/ide/cy82c693.c
+++ /dev/null
@@ -1,234 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 1998-2000 Andreas S. Krebs ([email protected]), Maintainer
- *  Copyright (C) 1998-2002 Andre Hedrick <[email protected]>, Integrator
- *  Copyright (C) 2007-2011 Bartlomiej Zolnierkiewicz
- *
- * CYPRESS CY82C693 chipset IDE controller
- *
- * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "cy82c693"
-
-/*
- *	NOTE: the value for busmaster timeout is tricky and I got it by
- *	trial and error!  By using a to low value will cause DMA timeouts
- *	and drop IDE performance, and by using a to high value will cause
- *	audio playback to scatter.
- *	If you know a better value or how to calc it, please let me know.
- */
-
-/* twice the value written in cy82c693ub datasheet */
-#define BUSMASTER_TIMEOUT	0x50
-/*
- * the value above was tested on my machine and it seems to work okay
- */
-
-/* here are the offset definitions for the registers */
-#define CY82_IDE_CMDREG		0x04
-#define CY82_IDE_ADDRSETUP	0x48
-#define CY82_IDE_MASTER_IOR	0x4C
-#define CY82_IDE_MASTER_IOW	0x4D
-#define CY82_IDE_SLAVE_IOR	0x4E
-#define CY82_IDE_SLAVE_IOW	0x4F
-#define CY82_IDE_MASTER_8BIT	0x50
-#define CY82_IDE_SLAVE_8BIT	0x51
-
-#define CY82_INDEX_PORT		0x22
-#define CY82_DATA_PORT		0x23
-
-#define CY82_INDEX_CHANNEL0	0x30
-#define CY82_INDEX_CHANNEL1	0x31
-#define CY82_INDEX_TIMEOUT	0x32
-
-/*
- * set DMA mode a specific channel for CY82C693
- */
-
-static void cy82c693_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	const u8 mode = drive->dma_mode;
-	u8 single = (mode & 0x10) >> 4, index = 0, data = 0;
-
-	index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0;
-
-	data = (mode & 3) | (single << 2);
-
-	outb(index, CY82_INDEX_PORT);
-	outb(data, CY82_DATA_PORT);
-
-	/*
-	 * note: below we set the value for Bus Master IDE TimeOut Register
-	 * I'm not absolutely sure what this does, but it solved my problem
-	 * with IDE DMA and sound, so I now can play sound and work with
-	 * my IDE driver at the same time :-)
-	 *
-	 * If you know the correct (best) value for this register please
-	 * let me know - ASK
-	 */
-
-	data = BUSMASTER_TIMEOUT;
-	outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
-	outb(data, CY82_DATA_PORT);
-}
-
-static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
-	const unsigned long T = 1000000 / bus_speed;
-	unsigned int addrCtrl;
-	struct ide_timing t;
-	u8 time_16, time_8;
-
-	/* select primary or secondary channel */
-	if (drive->dn > 1) {  /* drive is on the secondary channel */
-		dev = pci_get_slot(dev->bus, dev->devfn+1);
-		if (!dev) {
-			printk(KERN_ERR "%s: tune_drive: "
-				"Cannot find secondary interface!\n",
-				drive->name);
-			return;
-		}
-	}
-
-	ide_timing_compute(drive, drive->pio_mode, &t, T, 1);
-
-	time_16 = clamp_val(t.recover - 1, 0, 15) |
-		  (clamp_val(t.active - 1, 0, 15) << 4);
-	time_8 = clamp_val(t.act8b - 1, 0, 15) |
-		 (clamp_val(t.rec8b - 1, 0, 15) << 4);
-
-	/* now let's write  the clocks registers */
-	if ((drive->dn & 1) == 0) {
-		/*
-		 * set master drive
-		 * address setup control register
-		 * is 32 bit !!!
-		 */
-		pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
-
-		addrCtrl &= (~0xF);
-		addrCtrl |= clamp_val(t.setup - 1, 0, 15);
-		pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
-
-		/* now let's set the remaining registers */
-		pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, time_16);
-		pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, time_16);
-		pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, time_8);
-	} else {
-		/*
-		 * set slave drive
-		 * address setup control register
-		 * is 32 bit !!!
-		 */
-		pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
-
-		addrCtrl &= (~0xF0);
-		addrCtrl |= (clamp_val(t.setup - 1, 0, 15) << 4);
-		pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
-
-		/* now let's set the remaining registers */
-		pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, time_16);
-		pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16);
-		pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8);
-	}
-	if (drive->dn > 1)
-		pci_dev_put(dev);
-}
-
-static void init_iops_cy82c693(ide_hwif_t *hwif)
-{
-	static ide_hwif_t *primary;
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-
-	if (PCI_FUNC(dev->devfn) == 1)
-		primary = hwif;
-	else {
-		hwif->mate = primary;
-		hwif->channel = 1;
-	}
-}
-
-static const struct ide_port_ops cy82c693_port_ops = {
-	.set_pio_mode		= cy82c693_set_pio_mode,
-	.set_dma_mode		= cy82c693_set_dma_mode,
-};
-
-static const struct ide_port_info cy82c693_chipset = {
-	.name		= DRV_NAME,
-	.init_iops	= init_iops_cy82c693,
-	.port_ops	= &cy82c693_port_ops,
-	.host_flags	= IDE_HFLAG_SINGLE,
-	.pio_mask	= ATA_PIO4,
-	.swdma_mask	= ATA_SWDMA2,
-	.mwdma_mask	= ATA_MWDMA2,
-};
-
-static int cy82c693_init_one(struct pci_dev *dev,
-			     const struct pci_device_id *id)
-{
-	struct pci_dev *dev2;
-	int ret = -ENODEV;
-
-	/* CY82C693 is more than only a IDE controller.
-	   Function 1 is primary IDE channel, function 2 - secondary. */
-	if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
-	    PCI_FUNC(dev->devfn) == 1) {
-		dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
-		ret = ide_pci_init_two(dev, dev2, &cy82c693_chipset, NULL);
-		if (ret)
-			pci_dev_put(dev2);
-	}
-	return ret;
-}
-
-static void cy82c693_remove(struct pci_dev *dev)
-{
-	struct ide_host *host = pci_get_drvdata(dev);
-	struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
-
-	ide_pci_remove(dev);
-	pci_dev_put(dev2);
-}
-
-static const struct pci_device_id cy82c693_pci_tbl[] = {
-	{ PCI_VDEVICE(CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693), 0 },
-	{ 0, },
-};
-MODULE_DEVICE_TABLE(pci, cy82c693_pci_tbl);
-
-static struct pci_driver cy82c693_pci_driver = {
-	.name		= "Cypress_IDE",
-	.id_table	= cy82c693_pci_tbl,
-	.probe		= cy82c693_init_one,
-	.remove		= cy82c693_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
-};
-
-static int __init cy82c693_ide_init(void)
-{
-	return ide_pci_register_driver(&cy82c693_pci_driver);
-}
-
-static void __exit cy82c693_ide_exit(void)
-{
-	pci_unregister_driver(&cy82c693_pci_driver);
-}
-
-module_init(cy82c693_ide_init);
-module_exit(cy82c693_ide_exit);
-
-MODULE_AUTHOR("Andreas Krebs, Andre Hedrick, Bartlomiej Zolnierkiewicz");
-MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE");
-MODULE_LICENSE("GPL");