drm: rcar-du: lvds: D3/E3 support

The LVDS encoders in the D3 and E3 SoCs differ significantly from those
in the other R-Car Gen3 family members:

- The LVDS PLL architecture is more complex and requires computing PLL
  parameters manually.
- The PLL uses external clocks as inputs, which need to be retrieved
  from DT.
- In addition to the different PLL setup, the startup sequence has
  changed *again* (seems someone had trouble making his/her mind).

Supporting all this requires DT bindings extensions for external clocks,
brand new PLL setup code, and a few quirks to handle the differences in
the startup sequence.

The implementation doesn't support all hardware features yet, namely

- Using the LV[01] clocks generated by the CPG as PLL input.
- Providing the LVDS PLL clock to the DU for use with the RGB output.

Those features can be added later when the need will arise.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

1 files changed, 40 insertions, 3 deletions

diff --git a/drivers/gpu/drm/rcar-du/rcar_lvds_regs.h b/drivers/gpu/drm/rcar-du/rcar_lvds_regs.h
index 4870f50d9bec..87149f2f8056 100644
--- a/drivers/gpu/drm/rcar-du/rcar_lvds_regs.h
+++ b/drivers/gpu/drm/rcar-du/rcar_lvds_regs.h
@@ -18,7 +18,7 @@
 #define LVDCR0_PLLON			(1 << 4)
 #define LVDCR0_PWD			(1 << 2)		/* Gen3 only */
 #define LVDCR0_BEN			(1 << 2)		/* Gen2 only */
-#define LVDCR0_LVEN			(1 << 1)		/* Gen2 only */
+#define LVDCR0_LVEN			(1 << 1)
 #define LVDCR0_LVRES			(1 << 0)
 
 #define LVDCR1				0x0004
@@ -27,21 +27,36 @@
 #define LVDCR1_CLKSTBY			(3 << 0)
 
 #define LVDPLLCR			0x0008
+/* Gen2 & V3M */
 #define LVDPLLCR_CEEN			(1 << 14)
 #define LVDPLLCR_FBEN			(1 << 13)
 #define LVDPLLCR_COSEL			(1 << 12)
-/* Gen2 */
 #define LVDPLLCR_PLLDLYCNT_150M		(0x1bf << 0)
 #define LVDPLLCR_PLLDLYCNT_121M		(0x22c << 0)
 #define LVDPLLCR_PLLDLYCNT_60M		(0x77b << 0)
 #define LVDPLLCR_PLLDLYCNT_38M		(0x69a << 0)
 #define LVDPLLCR_PLLDLYCNT_MASK		(0x7ff << 0)
-/* Gen3 */
+/* Gen3 but V3M,D3 and E3 */
 #define LVDPLLCR_PLLDIVCNT_42M		(0x014cb << 0)
 #define LVDPLLCR_PLLDIVCNT_85M		(0x00a45 << 0)
 #define LVDPLLCR_PLLDIVCNT_128M		(0x006c3 << 0)
 #define LVDPLLCR_PLLDIVCNT_148M		(0x046c1 << 0)
 #define LVDPLLCR_PLLDIVCNT_MASK		(0x7ffff << 0)
+/* D3 and E3 */
+#define LVDPLLCR_PLLON			(1 << 22)
+#define LVDPLLCR_PLLSEL_PLL0		(0 << 20)
+#define LVDPLLCR_PLLSEL_LVX		(1 << 20)
+#define LVDPLLCR_PLLSEL_PLL1		(2 << 20)
+#define LVDPLLCR_CKSEL_LVX		(1 << 17)
+#define LVDPLLCR_CKSEL_EXTAL		(3 << 17)
+#define LVDPLLCR_CKSEL_DU_DOTCLKIN(n)	((5 + (n) * 2) << 17)
+#define LVDPLLCR_OCKSEL			(1 << 16)
+#define LVDPLLCR_STP_CLKOUTE		(1 << 14)
+#define LVDPLLCR_OUTCLKSEL		(1 << 12)
+#define LVDPLLCR_CLKOUT			(1 << 11)
+#define LVDPLLCR_PLLE(n)		((n) << 10)
+#define LVDPLLCR_PLLN(n)		((n) << 3)
+#define LVDPLLCR_PLLM(n)		((n) << 0)
 
 #define LVDCTRCR			0x000c
 #define LVDCTRCR_CTR3SEL_ZERO		(0 << 12)
@@ -71,4 +86,26 @@
 #define LVDCHCR_CHSEL_CH(n, c)		((((c) - (n)) & 3) << ((n) * 4))
 #define LVDCHCR_CHSEL_MASK(n)		(3 << ((n) * 4))
 
+/* All registers below are specific to D3 and E3 */
+#define LVDSTRIPE			0x0014
+#define LVDSTRIPE_ST_TRGSEL_DISP	(0 << 2)
+#define LVDSTRIPE_ST_TRGSEL_HSYNC_R	(1 << 2)
+#define LVDSTRIPE_ST_TRGSEL_HSYNC_F	(2 << 2)
+#define LVDSTRIPE_ST_SWAP		(1 << 1)
+#define LVDSTRIPE_ST_ON			(1 << 0)
+
+#define LVDSCR				0x0018
+#define LVDSCR_DEPTH(n)			(((n) - 1) << 29)
+#define LVDSCR_BANDSET			(1 << 28)
+#define LVDSCR_TWGCNT(n)		((((n) - 256) / 16) << 24)
+#define LVDSCR_SDIV(n)			((n) << 22)
+#define LVDSCR_MODE			(1 << 21)
+#define LVDSCR_RSTN			(1 << 20)
+
+#define LVDDIV				0x001c
+#define LVDDIV_DIVSEL			(1 << 8)
+#define LVDDIV_DIVRESET			(1 << 7)
+#define LVDDIV_DIVSTP			(1 << 6)
+#define LVDDIV_DIV(n)			((n) << 0)
+
 #endif /* __RCAR_LVDS_REGS_H__ */