Merge tag 'drm-intel-next-2015-01-17' of git://anongit.freedesktop.org/drm-intel into drm-next

- refactor i915/snd-hda interaction to use the component framework (Imre)
- psr cleanups and small fixes (Rodrigo)
- a few perf w/a from Ken Graunke
- switch to atomic plane helpers (Matt Roper)
- wc mmap support (Chris Wilson & Akash Goel)
- smaller things all over

* tag 'drm-intel-next-2015-01-17' of git://anongit.freedesktop.org/drm-intel: (40 commits)
  drm/i915: Update DRIVER_DATE to 20150117
  i915: reuse %ph to dump small buffers
  drm/i915: Ensure the HiZ RAW Stall Optimization is on for Cherryview.
  drm/i915: Enable the HiZ RAW Stall Optimization on Broadwell.
  drm/i915: PSR link standby at debugfs
  drm/i915: group link_standby setup and let this info visible everywhere.
  drm/i915: Add missing vbt check.
  drm/i915: PSR HSW/BDW: Fix inverted logic at sink main_link_active bit.
  drm/i915: PSR VLV/CHV: Remove condition checks that only applies to Haswell.
  drm/i915: VLV/CHV PSR needs to exit PSR on every flush.
  drm/i915: Fix kerneldoc for i915 atomic plane code
  drm/i915: Don't pretend SDVO hotplug works on 915
  drm/i915: Don't register HDMI connectors for eDP ports on VLV/CHV
  drm/i915: Remove I915_HAS_HOTPLUG() check from i915_hpd_irq_setup()
  drm/i915: Make hpd arrays big enough to avoid out of bounds access
  Revert "drm/i915/chv: Use timeout mode for RC6 on chv"
  drm/i915: Improve HiZ throughput on Cherryview.
  drm/i915: Reset CSB read pointer in ring init
  drm/i915: Drop unused position fields (v2)
  drm/i915: Move to atomic plane helpers (v9)
  ...

1 files changed, 18 insertions, 24 deletions

diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index dd0e6e0447d4..5ae193ec464a 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -143,7 +143,6 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t aux_clock_divider;
 	int precharge = 0x3;
-	bool only_standby = dev_priv->vbt.psr.full_link;
 	static const uint8_t aux_msg[] = {
 		[0] = DP_AUX_NATIVE_WRITE << 4,
 		[1] = DP_SET_POWER >> 8,
@@ -157,16 +156,13 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
 
 	aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, 0);
 
-	if (IS_BROADWELL(dev) && dig_port->port != PORT_A)
-		only_standby = true;
-
 	/* Enable PSR in sink */
-	if (intel_dp->psr_dpcd[1] & DP_PSR_NO_TRAIN_ON_EXIT || only_standby)
+	if (dev_priv->psr.link_standby)
 		drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
-				   DP_PSR_ENABLE & ~DP_PSR_MAIN_LINK_ACTIVE);
+				   DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE);
 	else
 		drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
-				   DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE);
+				   DP_PSR_ENABLE & ~DP_PSR_MAIN_LINK_ACTIVE);
 
 	/* Setup AUX registers */
 	for (i = 0; i < sizeof(aux_msg); i += 4)
@@ -226,12 +222,8 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp)
 			       dev_priv->vbt.psr.idle_frames + 1 : 2;
 	uint32_t val = 0x0;
 	const uint32_t link_entry_time = EDP_PSR_MIN_LINK_ENTRY_TIME_8_LINES;
-	bool only_standby = false;
 
-	if (IS_BROADWELL(dev) && dig_port->port != PORT_A)
-		only_standby = true;
-
-	if (intel_dp->psr_dpcd[1] & DP_PSR_NO_TRAIN_ON_EXIT || only_standby) {
+	if (dev_priv->psr.link_standby) {
 		val |= EDP_PSR_LINK_STANDBY;
 		val |= EDP_PSR_TP2_TP3_TIME_0us;
 		val |= EDP_PSR_TP1_TIME_0us;
@@ -270,22 +262,19 @@ static bool intel_psr_match_conditions(struct intel_dp *intel_dp)
 		return false;
 	}
 
-	/* Below limitations aren't valid for Broadwell */
-	if (IS_BROADWELL(dev))
-		goto out;
-
-	if (I915_READ(HSW_STEREO_3D_CTL(intel_crtc->config.cpu_transcoder)) &
-	    S3D_ENABLE) {
+	if (IS_HASWELL(dev) &&
+	    I915_READ(HSW_STEREO_3D_CTL(intel_crtc->config.cpu_transcoder)) &
+		      S3D_ENABLE) {
 		DRM_DEBUG_KMS("PSR condition failed: Stereo 3D is Enabled\n");
 		return false;
 	}
 
-	if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) {
+	if (IS_HASWELL(dev) &&
+	    intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) {
 		DRM_DEBUG_KMS("PSR condition failed: Interlaced is Enabled\n");
 		return false;
 	}
 
- out:
 	dev_priv->psr.source_ok = true;
 	return true;
 }
@@ -344,6 +333,13 @@ void intel_psr_enable(struct intel_dp *intel_dp)
 	if (!intel_psr_match_conditions(intel_dp))
 		goto unlock;
 
+	/* First we check VBT, but we must respect sink and source
+	 * known restrictions */
+	dev_priv->psr.link_standby = dev_priv->vbt.psr.full_link;
+	if ((intel_dp->psr_dpcd[1] & DP_PSR_NO_TRAIN_ON_EXIT) ||
+	    (IS_BROADWELL(dev) && intel_dig_port->port != PORT_A))
+		dev_priv->psr.link_standby = true;
+
 	dev_priv->psr.busy_frontbuffer_bits = 0;
 
 	if (HAS_DDI(dev)) {
@@ -620,13 +616,11 @@ void intel_psr_flush(struct drm_device *dev,
 
 	/*
 	 * On Valleyview and Cherryview we don't use hardware tracking so
-	 * sprite plane updates or cursor moves don't result in a PSR
+	 * any plane updates or cursor moves don't result in a PSR
 	 * invalidating. Which means we need to manually fake this in
 	 * software for all flushes, not just when we've seen a preceding
 	 * invalidation through frontbuffer rendering. */
-	if (!HAS_DDI(dev) &&
-	    ((frontbuffer_bits & INTEL_FRONTBUFFER_SPRITE(pipe)) ||
-	     (frontbuffer_bits & INTEL_FRONTBUFFER_CURSOR(pipe))))
+	if (!HAS_DDI(dev))
 		intel_psr_exit(dev);
 
 	if (!dev_priv->psr.active && !dev_priv->psr.busy_frontbuffer_bits)