Merge tag 'drm-intel-next-2013-12-13' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

- fbc1 improvements from Ville (pre-gm45).
- vlv forcewake improvements from Deepak S.
- Some corner-cases fixes from Mika for the context hang stat code.
- pc8 improvements and prep work for runtime D3 from Paulo, almost ready for
  primetime.
- gen2 dpll fixes from Ville.
- DSI improvements from Shobhit Kumar.
- A few smaller fixes and improvements all over.

[airlied: intel_ddi.c conflict fixed up]

* tag 'drm-intel-next-2013-12-13' of git://people.freedesktop.org/~danvet/drm-intel: (61 commits)
  drm/i915/bdw: Implement ff workarounds
  drm/i915/bdw: Force all Data Cache Data Port access to be Non-Coherent
  drm/i915/bdw: Don't use forcewake needlessly
  drm/i915: Clear out old GT FIFO errors in intel_uncore_early_sanitize()
  drm/i915: dont call irq_put when irq test is on
  drm/i915: Rework the FBC interval/stall stuff a bit
  drm/i915: Enable FBC for all mobile gen2 and gen3 platforms
  drm/i915: FBC_CONTROL2 is gen4 only
  drm/i915: Gen2 FBC1 CFB pitch wants 32B units
  drm/i915: split intel_ddi_pll_mode_set in 2 pieces
  drm/i915: Fix timeout with missed interrupts in __wait_seqno
  drm/i915: touch VGA MSR after we enable the power well
  drm/i915: extract hsw_power_well_post_{enable, disable}
  drm/i915: remove i915_disable_vga_mem declaration
  drm/i915: Parametrize the dphy and other spec specific parameters
  drm/i915: Remove redundant DSI PLL enabling
  drm/i915: Reorganize the DSI enable/disable sequence
  drm/i915: Try harder to get best m, n, p values with minimal error
  drm/i915: Compute dsi_clk from pixel clock
  drm/i915: Use FLISDSI interface for band gap reset
  ...

Conflicts:
	drivers/gpu/drm/i915/intel_ddi.c

1 files changed, 29 insertions, 56 deletions

diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 3deb58e2f394..8bcb93a2a9f6 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -447,9 +447,19 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
 	if (dev_priv->modeset_restore == MODESET_DONE)
 		goto exit;
 
-	drm_modeset_lock_all(dev);
-	intel_modeset_setup_hw_state(dev, true);
-	drm_modeset_unlock_all(dev);
+	/*
+	 * Some old platform's BIOS love to wreak havoc while the lid is closed.
+	 * We try to detect this here and undo any damage. The split for PCH
+	 * platforms is rather conservative and a bit arbitrary expect that on
+	 * those platforms VGA disabling requires actual legacy VGA I/O access,
+	 * and as part of the cleanup in the hw state restore we also redisable
+	 * the vga plane.
+	 */
+	if (!HAS_PCH_SPLIT(dev)) {
+		drm_modeset_lock_all(dev);
+		intel_modeset_setup_hw_state(dev, true);
+		drm_modeset_unlock_all(dev);
+	}
 
 	dev_priv->modeset_restore = MODESET_DONE;
 
@@ -745,57 +755,6 @@ static const struct dmi_system_id intel_no_lvds[] = {
 	{ }	/* terminating entry */
 };
 
-/**
- * intel_find_lvds_downclock - find the reduced downclock for LVDS in EDID
- * @dev: drm device
- * @connector: LVDS connector
- *
- * Find the reduced downclock for LVDS in EDID.
- */
-static void intel_find_lvds_downclock(struct drm_device *dev,
-				      struct drm_display_mode *fixed_mode,
-				      struct drm_connector *connector)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct drm_display_mode *scan;
-	int temp_downclock;
-
-	temp_downclock = fixed_mode->clock;
-	list_for_each_entry(scan, &connector->probed_modes, head) {
-		/*
-		 * If one mode has the same resolution with the fixed_panel
-		 * mode while they have the different refresh rate, it means
-		 * that the reduced downclock is found for the LVDS. In such
-		 * case we can set the different FPx0/1 to dynamically select
-		 * between low and high frequency.
-		 */
-		if (scan->hdisplay == fixed_mode->hdisplay &&
-		    scan->hsync_start == fixed_mode->hsync_start &&
-		    scan->hsync_end == fixed_mode->hsync_end &&
-		    scan->htotal == fixed_mode->htotal &&
-		    scan->vdisplay == fixed_mode->vdisplay &&
-		    scan->vsync_start == fixed_mode->vsync_start &&
-		    scan->vsync_end == fixed_mode->vsync_end &&
-		    scan->vtotal == fixed_mode->vtotal) {
-			if (scan->clock < temp_downclock) {
-				/*
-				 * The downclock is already found. But we
-				 * expect to find the lower downclock.
-				 */
-				temp_downclock = scan->clock;
-			}
-		}
-	}
-	if (temp_downclock < fixed_mode->clock && i915_lvds_downclock) {
-		/* We found the downclock for LVDS. */
-		dev_priv->lvds_downclock_avail = 1;
-		dev_priv->lvds_downclock = temp_downclock;
-		DRM_DEBUG_KMS("LVDS downclock is found in EDID. "
-			      "Normal clock %dKhz, downclock %dKhz\n",
-			      fixed_mode->clock, temp_downclock);
-	}
-}
-
 /*
  * Enumerate the child dev array parsed from VBT to check whether
  * the LVDS is present.
@@ -1073,8 +1032,22 @@ void intel_lvds_init(struct drm_device *dev)
 
 			fixed_mode = drm_mode_duplicate(dev, scan);
 			if (fixed_mode) {
-				intel_find_lvds_downclock(dev, fixed_mode,
-							  connector);
+				intel_connector->panel.downclock_mode =
+					intel_find_panel_downclock(dev,
+					fixed_mode, connector);
+				if (intel_connector->panel.downclock_mode !=
+					NULL &&	i915_lvds_downclock) {
+					/* We found the downclock for LVDS. */
+					dev_priv->lvds_downclock_avail = true;
+					dev_priv->lvds_downclock =
+						intel_connector->panel.
+						downclock_mode->clock;
+					DRM_DEBUG_KMS("LVDS downclock is found"
+					" in EDID. Normal clock %dKhz, "
+					"downclock %dKhz\n",
+					fixed_mode->clock,
+					dev_priv->lvds_downclock);
+				}
 				goto out;
 			}
 		}