Merge tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for the 5.1 merge window.

  The big changes I'd highlight are:
   - nouveau has HMM support now, there is finally an in-tree user so we
     can quieten down the rip it out people.
   - i915 now enables fastboot by default on Skylake+
   - Displayport Multistream support has been refactored and should
     hopefully be more reliable.

  Core:
   - header cleanups aiming towards removing drmP.h
   - dma-buf fence seqnos to 64-bits
   - common helper for DP mst hotplug for radeon,i915,amdgpu + new
     refcounting scheme
   - MST i2c improvements
   - drm_syncobj_cb removal
   - ARM FB compression fourcc
   - P010 + P016 fourcc
   - allwinner tiled format modifier
   - i2c over aux I2C_M_STOP support
   - DRM_AUTH handling fixes

  TTM:
   - ref/unref renaming

  New driver:
   - ARM komeda display driver

  scheduler:
   - refactor mirror list handling
   - rework hw fence processing
   - 0 run queue entity fix

  bridge:
   - TI DS90C185 LVDS bridge
   - thc631lvdm83d bridge improvements
   - cadence + allwinner DSI ported to generic phy

  panels:
   - Sitronix ST7701 panel
   - Kingdisplay KD097D04
   - LeMaker BL035-RGB-002
   - PDA 91-00156-A0
   - Innolux EE101IA-01D

  i915:
   - Enable fastboot by default on SKL+/VLV/CHV
   - Export RPCS configuration for ICL media driver
   - Coffelake PCI ID
   - CNL clocks setup fixes
   - ACPI/PMIC support for MIPI/DSI
   - Per-engine WA init for all engines
   - Shrinker locking fixes
   - Kerneldoc updates
   - Lots of ring improvements and reset fixes
   - Coffeelake GVT Support
   - VFIO GVT EDID Region support
   - runtime PM wakeref tracking
   - ILK->IVB primary plane enable delays
   - userptr mutex locking fixes
   - DSI fixes
   - LVDS/TV cleanups
   - HW readout fixes
   - LUT robustness fixes
   - ICL display and watermark fixes
   - gem mmap race fix

  amdgpu:
   - add scheduled dependencies interface
   - DCC on scanout surfaces
   - vega10/20 BACO support
   - Multiple IH rings on soc15
   - XGMI locking fixes
   - DC i2c/aux cleanups
   - runtime SMU debug interface
   - Kexec improvmeents
   - SR-IOV fixes
   - DC freesync + ABM fixes
   - GDS fixes
   - GPUVM fixes
   - vega20 PCIE DPM switching fixes
   - Context priority handling fixes

  radeon:
   - fix missing break in evergreen parser

  nouveau:
   - SVM support via HMM

  msm:
   - QCOM Compressed modifier support

  exynos:
   - s5pv210 rotator support

  imx:
   - zpos property support
   - pending update fixes

  v3d:
   - cache flush improvments

  vc4:
   - reflection support
   - HDMI overscan support

  tegra:
   - CEC refactoring
   - HDMI audio fixes
   - Tegra186 prep work
   - SOR crossbar device tree fixes

  sun4i:
   - implicit fencing support
   - YUV and scalar support improvements
   - A23 support
   - tiling fixes

  atmel-hlcdc:
   - clipping and rotation property fixes

  qxl:
   - BO and PRIME improvements
   - generic fbdev emulation

  dw-hdmi:
   - HDMI 2.0 2160p
   - YUV420 ouput

  rockchip:
   - implicit fencing support
   - reflection proerties

  virtio-gpu:
   - use generic fbdev emulation

  tilcdc:
   - cpufreq vs crtc init fix

  rcar-du:
   - R8A774C0 support
   - D3/E3 RGB output routing fixes and DPAD0 support
   - RA87744 LVDS support

  bochs:
   - atomic and generic fbdev emulation
   - ID mismatch error on bochs load

  meson:
   - remove firmware fbs"

* tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm: (1130 commits)
  drm/amd/display: Use vrr friendly pageflip throttling in DC.
  drm/imx: only send commit done event when all state has been applied
  drm/imx: allow building under COMPILE_TEST
  drm/imx: imx-tve: depend on COMMON_CLK
  drm/imx: ipuv3-plane: add zpos property
  drm/imx: ipuv3-plane: add function to query atomic update status
  gpu: ipu-v3: prg: add function to get channel configure status
  gpu: ipu-v3: pre: add double buffer status readback
  drm/amdgpu: Bump amdgpu version for context priority override.
  drm/amdgpu/powerplay: fix typo in BACO header guards
  drm/amdgpu/powerplay: fix return codes in BACO code
  drm/amdgpu: add missing license on baco files
  drm/bochs: Fix the ID mismatch error
  drm/nouveau/dmem: use dma addresses during migration copies
  drm/nouveau/dmem: use physical vram addresses during migration copies
  drm/nouveau/dmem: extend copy function to allow direct use of physical addresses
  drm/nouveau/svm: new ioctl to migrate process memory to GPU memory
  drm/nouveau/dmem: device memory helpers for SVM
  drm/nouveau/svm: initial support for shared virtual memory
  drm/nouveau: prepare for enabling svm with existing userspace interfaces
  ...

1 files changed, 51 insertions, 50 deletions

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index b506e3622b08..990b1909f9d7 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -3641,6 +3641,20 @@ static bool cea_db_is_hdmi_forum_vsdb(const u8 *db)
 	return oui == HDMI_FORUM_IEEE_OUI;
 }
 
+static bool cea_db_is_vcdb(const u8 *db)
+{
+	if (cea_db_tag(db) != USE_EXTENDED_TAG)
+		return false;
+
+	if (cea_db_payload_len(db) != 2)
+		return false;
+
+	if (cea_db_extended_tag(db) != EXT_VIDEO_CAPABILITY_BLOCK)
+		return false;
+
+	return true;
+}
+
 static bool cea_db_is_y420cmdb(const u8 *db)
 {
 	if (cea_db_tag(db) != USE_EXTENDED_TAG)
@@ -4223,41 +4237,6 @@ end:
 }
 EXPORT_SYMBOL(drm_detect_monitor_audio);
 
-/**
- * drm_rgb_quant_range_selectable - is RGB quantization range selectable?
- * @edid: EDID block to scan
- *
- * Check whether the monitor reports the RGB quantization range selection
- * as supported. The AVI infoframe can then be used to inform the monitor
- * which quantization range (full or limited) is used.
- *
- * Return: True if the RGB quantization range is selectable, false otherwise.
- */
-bool drm_rgb_quant_range_selectable(struct edid *edid)
-{
-	u8 *edid_ext;
-	int i, start, end;
-
-	edid_ext = drm_find_cea_extension(edid);
-	if (!edid_ext)
-		return false;
-
-	if (cea_db_offsets(edid_ext, &start, &end))
-		return false;
-
-	for_each_cea_db(edid_ext, i, start, end) {
-		if (cea_db_tag(&edid_ext[i]) == USE_EXTENDED_TAG &&
-		    cea_db_payload_len(&edid_ext[i]) == 2 &&
-		    cea_db_extended_tag(&edid_ext[i]) ==
-			EXT_VIDEO_CAPABILITY_BLOCK) {
-			DRM_DEBUG_KMS("CEA VCDB 0x%02x\n", edid_ext[i + 2]);
-			return edid_ext[i + 2] & EDID_CEA_VCDB_QS;
-		}
-	}
-
-	return false;
-}
-EXPORT_SYMBOL(drm_rgb_quant_range_selectable);
 
 /**
  * drm_default_rgb_quant_range - default RGB quantization range
@@ -4278,6 +4257,16 @@ drm_default_rgb_quant_range(const struct drm_display_mode *mode)
 }
 EXPORT_SYMBOL(drm_default_rgb_quant_range);
 
+static void drm_parse_vcdb(struct drm_connector *connector, const u8 *db)
+{
+	struct drm_display_info *info = &connector->display_info;
+
+	DRM_DEBUG_KMS("CEA VCDB 0x%02x\n", db[2]);
+
+	if (db[2] & EDID_CEA_VCDB_QS)
+		info->rgb_quant_range_selectable = true;
+}
+
 static void drm_parse_ycbcr420_deep_color_info(struct drm_connector *connector,
 					       const u8 *db)
 {
@@ -4452,6 +4441,8 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
 			drm_parse_hdmi_forum_vsdb(connector, db);
 		if (cea_db_is_y420cmdb(db))
 			drm_parse_y420cmdb_bitmap(connector, db);
+		if (cea_db_is_vcdb(db))
+			drm_parse_vcdb(connector, db);
 	}
 }
 
@@ -4472,6 +4463,7 @@ drm_reset_display_info(struct drm_connector *connector)
 	info->max_tmds_clock = 0;
 	info->dvi_dual = false;
 	info->has_hdmi_infoframe = false;
+	info->rgb_quant_range_selectable = false;
 	memset(&info->hdmi, 0, sizeof(info->hdmi));
 
 	info->non_desktop = 0;
@@ -4830,19 +4822,32 @@ void drm_set_preferred_mode(struct drm_connector *connector,
 }
 EXPORT_SYMBOL(drm_set_preferred_mode);
 
+static bool is_hdmi2_sink(struct drm_connector *connector)
+{
+	/*
+	 * FIXME: sil-sii8620 doesn't have a connector around when
+	 * we need one, so we have to be prepared for a NULL connector.
+	 */
+	if (!connector)
+		return true;
+
+	return connector->display_info.hdmi.scdc.supported ||
+		connector->display_info.color_formats & DRM_COLOR_FORMAT_YCRCB420;
+}
+
 /**
  * drm_hdmi_avi_infoframe_from_display_mode() - fill an HDMI AVI infoframe with
  *                                              data from a DRM display mode
  * @frame: HDMI AVI infoframe
+ * @connector: the connector
  * @mode: DRM display mode
- * @is_hdmi2_sink: Sink is HDMI 2.0 compliant
  *
  * Return: 0 on success or a negative error code on failure.
  */
 int
 drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
-					 const struct drm_display_mode *mode,
-					 bool is_hdmi2_sink)
+					 struct drm_connector *connector,
+					 const struct drm_display_mode *mode)
 {
 	enum hdmi_picture_aspect picture_aspect;
 	int err;
@@ -4864,7 +4869,7 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
 	 * HDMI 2.0 VIC range: 1 <= VIC <= 107 (CEA-861-F). So we
 	 * have to make sure we dont break HDMI 1.4 sinks.
 	 */
-	if (!is_hdmi2_sink && frame->video_code > 64)
+	if (!is_hdmi2_sink(connector) && frame->video_code > 64)
 		frame->video_code = 0;
 
 	/*
@@ -4923,22 +4928,18 @@ EXPORT_SYMBOL(drm_hdmi_avi_infoframe_from_display_mode);
  * drm_hdmi_avi_infoframe_quant_range() - fill the HDMI AVI infoframe
  *                                        quantization range information
  * @frame: HDMI AVI infoframe
+ * @connector: the connector
  * @mode: DRM display mode
  * @rgb_quant_range: RGB quantization range (Q)
- * @rgb_quant_range_selectable: Sink support selectable RGB quantization range (QS)
- * @is_hdmi2_sink: HDMI 2.0 sink, which has different default recommendations
- *
- * Note that @is_hdmi2_sink can be derived by looking at the
- * &drm_scdc.supported flag stored in &drm_hdmi_info.scdc,
- * &drm_display_info.hdmi, which can be found in &drm_connector.display_info.
  */
 void
 drm_hdmi_avi_infoframe_quant_range(struct hdmi_avi_infoframe *frame,
+				   struct drm_connector *connector,
 				   const struct drm_display_mode *mode,
-				   enum hdmi_quantization_range rgb_quant_range,
-				   bool rgb_quant_range_selectable,
-				   bool is_hdmi2_sink)
+				   enum hdmi_quantization_range rgb_quant_range)
 {
+	const struct drm_display_info *info = &connector->display_info;
+
 	/*
 	 * CEA-861:
 	 * "A Source shall not send a non-zero Q value that does not correspond
@@ -4949,7 +4950,7 @@ drm_hdmi_avi_infoframe_quant_range(struct hdmi_avi_infoframe *frame,
 	 * HDMI 2.0 recommends sending non-zero Q when it does match the
 	 * default RGB quantization range for the mode, even when QS=0.
 	 */
-	if (rgb_quant_range_selectable ||
+	if (info->rgb_quant_range_selectable ||
 	    rgb_quant_range == drm_default_rgb_quant_range(mode))
 		frame->quantization_range = rgb_quant_range;
 	else
@@ -4968,7 +4969,7 @@ drm_hdmi_avi_infoframe_quant_range(struct hdmi_avi_infoframe *frame,
 	 * we limit non-zero YQ to HDMI 2.0 sinks only as HDMI 2.0 is based
 	 * on on CEA-861-F.
 	 */
-	if (!is_hdmi2_sink ||
+	if (!is_hdmi2_sink(connector) ||
 	    rgb_quant_range == HDMI_QUANTIZATION_RANGE_LIMITED)
 		frame->ycc_quantization_range =
 			HDMI_YCC_QUANTIZATION_RANGE_LIMITED;