Merge tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.15 kernel cycle:

  Core:

   - Fix the semantics of raw GPIO to actually be raw. No inversion
     semantics as before, but also no open draining, and allow the raw
     operations to affect lines used for interrupts as the caller
     supposedly knows what they are doing if they are getting the big
     hammer.

   - Rewrote the __inner_function() notation calls to names that make
     more sense. I just find this kind of code disturbing.

   - Drop the .irq_base() field from the gpiochip since now all IRQs are
     mapped dynamically. This is nice.

   - Support for .get_multiple() in the core driver API. This allows us
     to read several GPIO lines with a single register read. This has
     high value for some usecases: it can be used to create
     oscilloscopes and signal analyzers and other things that rely on
     reading several lines at exactly the same instant. Also a generally
     nice optimization. This uses the new assign_bit() macro from the
     bitops lib that was ACKed by Andrew Morton and is implemented for
     two drivers, one of them being the generic MMIO driver so everyone
     using that will be able to benefit from this.

   - Do not allow requests of Open Drain and Open Source setting of a
     GPIO line simultaneously. If the hardware actually supports
     enabling both at the same time the electrical result would be
     disastrous.

   - A new interrupt chip core helper. This will be helpful to deal with
     "banked" GPIOs, which means GPIO controllers with several logical
     blocks of GPIO inside them. This is several gpiochips per device in
     the device model, in contrast to the case when there is a 1-to-1
     relationship between a device and a gpiochip.

  New drivers:

   - Maxim MAX3191x industrial serializer, a very interesting piece of
     professional I/O hardware.

   - Uniphier GPIO driver. This is the GPIO block from the recent
     Socionext (ex Fujitsu and Panasonic) platform.

   - Tegra 186 driver. This is based on the new banked GPIO
     infrastructure.

  Other improvements:

   - Some documentation improvements.

   - Wakeup support for the DesignWare DWAPB GPIO controller.

   - Reset line support on the DesignWare DWAPB GPIO controller.

   - Several non-critical bug fixes and improvements for the Broadcom
     BRCMSTB driver.

   - Misc non-critical bug fixes like exotic errorpaths, removal of dead
     code etc.

   - Explicit comments on fall-through switch() statements"

* tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (65 commits)
  gpio: tegra186: Remove tegra186_gpio_lock_class
  gpio: rcar: Add r8a77995 (R-Car D3) support
  pinctrl: bcm2835: Fix some merge fallout
  gpio: Fix undefined lock_dep_class
  gpio: Automatically add lockdep keys
  gpio: Introduce struct gpio_irq_chip.first
  gpio: Disambiguate struct gpio_irq_chip.nested
  gpio: Add Tegra186 support
  gpio: Export gpiochip_irq_{map,unmap}()
  gpio: Implement tighter IRQ chip integration
  gpio: Move lock_key into struct gpio_irq_chip
  gpio: Move irq_valid_mask into struct gpio_irq_chip
  gpio: Move irq_nested into struct gpio_irq_chip
  gpio: Move irq_chained_parent to struct gpio_irq_chip
  gpio: Move irq_default_type to struct gpio_irq_chip
  gpio: Move irq_handler to struct gpio_irq_chip
  gpio: Move irqdomain into struct gpio_irq_chip
  gpio: Move irqchip into struct gpio_irq_chip
  gpio: Introduce struct gpio_irq_chip
  pinctrl: armada-37xx: remove unused variable
  ...

1 files changed, 492 insertions, 0 deletions

diff --git a/drivers/gpio/gpio-max3191x.c b/drivers/gpio/gpio-max3191x.c
new file mode 100644
index 000000000000..f74b1072e84b
--- /dev/null
+++ b/drivers/gpio/gpio-max3191x.c
@@ -0,0 +1,492 @@
+/*
+ * gpio-max3191x.c - GPIO driver for Maxim MAX3191x industrial serializer
+ *
+ * Copyright (C) 2017 KUNBUS GmbH
+ *
+ * The MAX3191x makes 8 digital 24V inputs available via SPI.
+ * Multiple chips can be daisy-chained, the spec does not impose
+ * a limit on the number of chips and neither does this driver.
+ *
+ * Either of two modes is selectable: In 8-bit mode, only the state
+ * of the inputs is clocked out to achieve high readout speeds;
+ * In 16-bit mode, an additional status byte is clocked out with
+ * a CRC and indicator bits for undervoltage and overtemperature.
+ * The driver returns an error instead of potentially bogus data
+ * if any of these fault conditions occur.  However it does allow
+ * readout of non-faulting chips in the same daisy-chain.
+ *
+ * MAX3191x supports four debounce settings and the driver is
+ * capable of configuring these differently for each chip in the
+ * daisy-chain.
+ *
+ * If the chips are hardwired to 8-bit mode ("modesel" pulled high),
+ * gpio-pisosr.c can be used alternatively to this driver.
+ *
+ * https://datasheets.maximintegrated.com/en/ds/MAX31910.pdf
+ * https://datasheets.maximintegrated.com/en/ds/MAX31911.pdf
+ * https://datasheets.maximintegrated.com/en/ds/MAX31912.pdf
+ * https://datasheets.maximintegrated.com/en/ds/MAX31913.pdf
+ * https://datasheets.maximintegrated.com/en/ds/MAX31953-MAX31963.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2) as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitmap.h>
+#include <linux/crc8.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+enum max3191x_mode {
+	STATUS_BYTE_ENABLED,
+	STATUS_BYTE_DISABLED,
+};
+
+/**
+ * struct max3191x_chip - max3191x daisy-chain
+ * @gpio: GPIO controller struct
+ * @lock: protects read sequences
+ * @nchips: number of chips in the daisy-chain
+ * @mode: current mode, 0 for 16-bit, 1 for 8-bit;
+ *	for simplicity, all chips in the daisy-chain are assumed
+ *	to use the same mode
+ * @modesel_pins: GPIO pins to configure modesel of each chip
+ * @fault_pins: GPIO pins to detect fault of each chip
+ * @db0_pins: GPIO pins to configure debounce of each chip
+ * @db1_pins: GPIO pins to configure debounce of each chip
+ * @mesg: SPI message to perform a readout
+ * @xfer: SPI transfer used by @mesg
+ * @crc_error: bitmap signaling CRC error for each chip
+ * @overtemp: bitmap signaling overtemperature alarm for each chip
+ * @undervolt1: bitmap signaling undervoltage alarm for each chip
+ * @undervolt2: bitmap signaling undervoltage warning for each chip
+ * @fault: bitmap signaling assertion of @fault_pins for each chip
+ * @ignore_uv: whether to ignore undervoltage alarms;
+ *	set by a device property if the chips are powered through
+ *	5VOUT instead of VCC24V, in which case they will constantly
+ *	signal undervoltage;
+ *	for simplicity, all chips in the daisy-chain are assumed
+ *	to be powered the same way
+ */
+struct max3191x_chip {
+	struct gpio_chip gpio;
+	struct mutex lock;
+	u32 nchips;
+	enum max3191x_mode mode;
+	struct gpio_descs *modesel_pins;
+	struct gpio_descs *fault_pins;
+	struct gpio_descs *db0_pins;
+	struct gpio_descs *db1_pins;
+	struct spi_message mesg;
+	struct spi_transfer xfer;
+	unsigned long *crc_error;
+	unsigned long *overtemp;
+	unsigned long *undervolt1;
+	unsigned long *undervolt2;
+	unsigned long *fault;
+	bool ignore_uv;
+};
+
+#define MAX3191X_NGPIO 8
+#define MAX3191X_CRC8_POLYNOMIAL 0xa8 /* (x^5) + x^4 + x^2 + x^0 */
+
+DECLARE_CRC8_TABLE(max3191x_crc8);
+
+static int max3191x_get_direction(struct gpio_chip *gpio, unsigned int offset)
+{
+	return 1; /* always in */
+}
+
+static int max3191x_direction_input(struct gpio_chip *gpio, unsigned int offset)
+{
+	return 0;
+}
+
+static int max3191x_direction_output(struct gpio_chip *gpio,
+				     unsigned int offset, int value)
+{
+	return -EINVAL;
+}
+
+static void max3191x_set(struct gpio_chip *gpio, unsigned int offset, int value)
+{ }
+
+static void max3191x_set_multiple(struct gpio_chip *gpio, unsigned long *mask,
+				  unsigned long *bits)
+{ }
+
+static unsigned int max3191x_wordlen(struct max3191x_chip *max3191x)
+{
+	return max3191x->mode == STATUS_BYTE_ENABLED ? 2 : 1;
+}
+
+static int max3191x_readout_locked(struct max3191x_chip *max3191x)
+{
+	struct device *dev = max3191x->gpio.parent;
+	struct spi_device *spi = to_spi_device(dev);
+	int val, i, ot = 0, uv1 = 0;
+
+	val = spi_sync(spi, &max3191x->mesg);
+	if (val) {
+		dev_err_ratelimited(dev, "SPI receive error %d\n", val);
+		return val;
+	}
+
+	for (i = 0; i < max3191x->nchips; i++) {
+		if (max3191x->mode == STATUS_BYTE_ENABLED) {
+			u8 in	  = ((u8 *)max3191x->xfer.rx_buf)[i * 2];
+			u8 status = ((u8 *)max3191x->xfer.rx_buf)[i * 2 + 1];
+
+			val = (status & 0xf8) != crc8(max3191x_crc8, &in, 1, 0);
+			__assign_bit(i, max3191x->crc_error, val);
+			if (val)
+				dev_err_ratelimited(dev,
+					"chip %d: CRC error\n", i);
+
+			ot  = (status >> 1) & 1;
+			__assign_bit(i, max3191x->overtemp, ot);
+			if (ot)
+				dev_err_ratelimited(dev,
+					"chip %d: overtemperature\n", i);
+
+			if (!max3191x->ignore_uv) {
+				uv1 = !((status >> 2) & 1);
+				__assign_bit(i, max3191x->undervolt1, uv1);
+				if (uv1)
+					dev_err_ratelimited(dev,
+						"chip %d: undervoltage\n", i);
+
+				val = !(status & 1);
+				__assign_bit(i, max3191x->undervolt2, val);
+				if (val && !uv1)
+					dev_warn_ratelimited(dev,
+						"chip %d: voltage warn\n", i);
+			}
+		}
+
+		if (max3191x->fault_pins && !max3191x->ignore_uv) {
+			/* fault pin shared by all chips or per chip */
+			struct gpio_desc *fault_pin =
+				(max3191x->fault_pins->ndescs == 1)
+					? max3191x->fault_pins->desc[0]
+					: max3191x->fault_pins->desc[i];
+
+			val = gpiod_get_value_cansleep(fault_pin);
+			if (val < 0) {
+				dev_err_ratelimited(dev,
+					"GPIO read error %d\n", val);
+				return val;
+			}
+			__assign_bit(i, max3191x->fault, val);
+			if (val && !uv1 && !ot)
+				dev_err_ratelimited(dev,
+					"chip %d: fault\n", i);
+		}
+	}
+
+	return 0;
+}
+
+static bool max3191x_chip_is_faulting(struct max3191x_chip *max3191x,
+				      unsigned int chipnum)
+{
+	/* without status byte the only diagnostic is the fault pin */
+	if (!max3191x->ignore_uv && test_bit(chipnum, max3191x->fault))
+		return true;
+
+	if (max3191x->mode == STATUS_BYTE_DISABLED)
+		return false;
+
+	return test_bit(chipnum, max3191x->crc_error) ||
+	       test_bit(chipnum, max3191x->overtemp)  ||
+	       (!max3191x->ignore_uv &&
+		test_bit(chipnum, max3191x->undervolt1));
+}
+
+static int max3191x_get(struct gpio_chip *gpio, unsigned int offset)
+{
+	struct max3191x_chip *max3191x = gpiochip_get_data(gpio);
+	int ret, chipnum, wordlen = max3191x_wordlen(max3191x);
+	u8 in;
+
+	mutex_lock(&max3191x->lock);
+	ret = max3191x_readout_locked(max3191x);
+	if (ret)
+		goto out_unlock;
+
+	chipnum = offset / MAX3191X_NGPIO;
+	if (max3191x_chip_is_faulting(max3191x, chipnum)) {
+		ret = -EIO;
+		goto out_unlock;
+	}
+
+	in = ((u8 *)max3191x->xfer.rx_buf)[chipnum * wordlen];
+	ret = (in >> (offset % MAX3191X_NGPIO)) & 1;
+
+out_unlock:
+	mutex_unlock(&max3191x->lock);
+	return ret;
+}
+
+static int max3191x_get_multiple(struct gpio_chip *gpio, unsigned long *mask,
+				 unsigned long *bits)
+{
+	struct max3191x_chip *max3191x = gpiochip_get_data(gpio);
+	int ret, bit = 0, wordlen = max3191x_wordlen(max3191x);
+
+	mutex_lock(&max3191x->lock);
+	ret = max3191x_readout_locked(max3191x);
+	if (ret)
+		goto out_unlock;
+
+	while ((bit = find_next_bit(mask, gpio->ngpio, bit)) != gpio->ngpio) {
+		unsigned int chipnum = bit / MAX3191X_NGPIO;
+		unsigned long in, shift, index;
+
+		if (max3191x_chip_is_faulting(max3191x, chipnum)) {
+			ret = -EIO;
+			goto out_unlock;
+		}
+
+		in = ((u8 *)max3191x->xfer.rx_buf)[chipnum * wordlen];
+		shift = round_down(bit % BITS_PER_LONG, MAX3191X_NGPIO);
+		index = bit / BITS_PER_LONG;
+		bits[index] &= ~(mask[index] & (0xff << shift));
+		bits[index] |= mask[index] & (in << shift); /* copy bits */
+
+		bit = (chipnum + 1) * MAX3191X_NGPIO; /* go to next chip */
+	}
+
+out_unlock:
+	mutex_unlock(&max3191x->lock);
+	return ret;
+}
+
+static int max3191x_set_config(struct gpio_chip *gpio, unsigned int offset,
+			       unsigned long config)
+{
+	struct max3191x_chip *max3191x = gpiochip_get_data(gpio);
+	u32 debounce, chipnum, db0_val, db1_val;
+
+	if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
+		return -ENOTSUPP;
+
+	if (!max3191x->db0_pins || !max3191x->db1_pins)
+		return -EINVAL;
+
+	debounce = pinconf_to_config_argument(config);
+	switch (debounce) {
+	case 0:
+		db0_val = 0;
+		db1_val = 0;
+		break;
+	case 1 ... 25:
+		db0_val = 0;
+		db1_val = 1;
+		break;
+	case 26 ... 750:
+		db0_val = 1;
+		db1_val = 0;
+		break;
+	case 751 ... 3000:
+		db0_val = 1;
+		db1_val = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (max3191x->db0_pins->ndescs == 1)
+		chipnum = 0; /* all chips use the same pair of debounce pins */
+	else
+		chipnum = offset / MAX3191X_NGPIO; /* per chip debounce pins */
+
+	mutex_lock(&max3191x->lock);
+	gpiod_set_value_cansleep(max3191x->db0_pins->desc[chipnum], db0_val);
+	gpiod_set_value_cansleep(max3191x->db1_pins->desc[chipnum], db1_val);
+	mutex_unlock(&max3191x->lock);
+	return 0;
+}
+
+static void gpiod_set_array_single_value_cansleep(unsigned int ndescs,
+						  struct gpio_desc **desc,
+						  int value)
+{
+	int i, values[ndescs];
+
+	for (i = 0; i < ndescs; i++)
+		values[i] = value;
+
+	gpiod_set_array_value_cansleep(ndescs, desc, values);
+}
+
+static struct gpio_descs *devm_gpiod_get_array_optional_count(
+				struct device *dev, const char *con_id,
+				enum gpiod_flags flags, unsigned int expected)
+{
+	struct gpio_descs *descs;
+	int found = gpiod_count(dev, con_id);
+
+	if (found == -ENOENT)
+		return NULL;
+
+	if (found != expected && found != 1) {
+		dev_err(dev, "ignoring %s-gpios: found %d, expected %u or 1\n",
+			con_id, found, expected);
+		return NULL;
+	}
+
+	descs = devm_gpiod_get_array_optional(dev, con_id, flags);
+
+	if (IS_ERR(descs)) {
+		dev_err(dev, "failed to get %s-gpios: %ld\n",
+			con_id, PTR_ERR(descs));
+		return NULL;
+	}
+
+	return descs;
+}
+
+static int max3191x_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct max3191x_chip *max3191x;
+	int n, ret;
+
+	max3191x = devm_kzalloc(dev, sizeof(*max3191x), GFP_KERNEL);
+	if (!max3191x)
+		return -ENOMEM;
+	spi_set_drvdata(spi, max3191x);
+
+	max3191x->nchips = 1;
+	device_property_read_u32(dev, "#daisy-chained-devices",
+				 &max3191x->nchips);
+
+	n = BITS_TO_LONGS(max3191x->nchips);
+	max3191x->crc_error   = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL);
+	max3191x->undervolt1  = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL);
+	max3191x->undervolt2  = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL);
+	max3191x->overtemp    = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL);
+	max3191x->fault       = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL);
+	max3191x->xfer.rx_buf = devm_kcalloc(dev, max3191x->nchips,
+								2, GFP_KERNEL);
+	if (!max3191x->crc_error || !max3191x->undervolt1 ||
+	    !max3191x->overtemp  || !max3191x->undervolt2 ||
+	    !max3191x->fault     || !max3191x->xfer.rx_buf)
+		return -ENOMEM;
+
+	max3191x->modesel_pins = devm_gpiod_get_array_optional_count(dev,
+				 "maxim,modesel", GPIOD_ASIS, max3191x->nchips);
+	max3191x->fault_pins   = devm_gpiod_get_array_optional_count(dev,
+				 "maxim,fault", GPIOD_IN, max3191x->nchips);
+	max3191x->db0_pins     = devm_gpiod_get_array_optional_count(dev,
+				 "maxim,db0", GPIOD_OUT_LOW, max3191x->nchips);
+	max3191x->db1_pins     = devm_gpiod_get_array_optional_count(dev,
+				 "maxim,db1", GPIOD_OUT_LOW, max3191x->nchips);
+
+	max3191x->mode = device_property_read_bool(dev, "maxim,modesel-8bit")
+				 ? STATUS_BYTE_DISABLED : STATUS_BYTE_ENABLED;
+	if (max3191x->modesel_pins)
+		gpiod_set_array_single_value_cansleep(
+				 max3191x->modesel_pins->ndescs,
+				 max3191x->modesel_pins->desc, max3191x->mode);
+
+	max3191x->ignore_uv = device_property_read_bool(dev,
+						  "maxim,ignore-undervoltage");
+
+	if (max3191x->db0_pins && max3191x->db1_pins &&
+	    max3191x->db0_pins->ndescs != max3191x->db1_pins->ndescs) {
+		dev_err(dev, "ignoring maxim,db*-gpios: array len mismatch\n");
+		devm_gpiod_put_array(dev, max3191x->db0_pins);
+		devm_gpiod_put_array(dev, max3191x->db1_pins);
+		max3191x->db0_pins = NULL;
+		max3191x->db1_pins = NULL;
+	}
+
+	max3191x->xfer.len = max3191x->nchips * max3191x_wordlen(max3191x);
+	spi_message_init_with_transfers(&max3191x->mesg, &max3191x->xfer, 1);
+
+	max3191x->gpio.label = spi->modalias;
+	max3191x->gpio.owner = THIS_MODULE;
+	max3191x->gpio.parent = dev;
+	max3191x->gpio.base = -1;
+	max3191x->gpio.ngpio = max3191x->nchips * MAX3191X_NGPIO;
+	max3191x->gpio.can_sleep = true;
+
+	max3191x->gpio.get_direction = max3191x_get_direction;
+	max3191x->gpio.direction_input = max3191x_direction_input;
+	max3191x->gpio.direction_output = max3191x_direction_output;
+	max3191x->gpio.set = max3191x_set;
+	max3191x->gpio.set_multiple = max3191x_set_multiple;
+	max3191x->gpio.get = max3191x_get;
+	max3191x->gpio.get_multiple = max3191x_get_multiple;
+	max3191x->gpio.set_config = max3191x_set_config;
+
+	mutex_init(&max3191x->lock);
+
+	ret = gpiochip_add_data(&max3191x->gpio, max3191x);
+	if (ret) {
+		mutex_destroy(&max3191x->lock);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int max3191x_remove(struct spi_device *spi)
+{
+	struct max3191x_chip *max3191x = spi_get_drvdata(spi);
+
+	gpiochip_remove(&max3191x->gpio);
+	mutex_destroy(&max3191x->lock);
+
+	return 0;
+}
+
+static int __init max3191x_register_driver(struct spi_driver *sdrv)
+{
+	crc8_populate_msb(max3191x_crc8, MAX3191X_CRC8_POLYNOMIAL);
+	return spi_register_driver(sdrv);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id max3191x_of_id[] = {
+	{ .compatible = "maxim,max31910" },
+	{ .compatible = "maxim,max31911" },
+	{ .compatible = "maxim,max31912" },
+	{ .compatible = "maxim,max31913" },
+	{ .compatible = "maxim,max31953" },
+	{ .compatible = "maxim,max31963" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max3191x_of_id);
+#endif
+
+static const struct spi_device_id max3191x_spi_id[] = {
+	{ "max31910" },
+	{ "max31911" },
+	{ "max31912" },
+	{ "max31913" },
+	{ "max31953" },
+	{ "max31963" },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, max3191x_spi_id);
+
+static struct spi_driver max3191x_driver = {
+	.driver = {
+		.name		= "max3191x",
+		.of_match_table	= of_match_ptr(max3191x_of_id),
+	},
+	.probe	  = max3191x_probe,
+	.remove	  = max3191x_remove,
+	.id_table = max3191x_spi_id,
+};
+module_driver(max3191x_driver, max3191x_register_driver, spi_unregister_driver);
+
+MODULE_AUTHOR("Lukas Wunner <lukas@wunner.de>");
+MODULE_DESCRIPTION("GPIO driver for Maxim MAX3191x industrial serializer");
+MODULE_LICENSE("GPL v2");