Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "I'm actually surprised this time. There aren't any new Qualcomm SoC
  clk drivers. And there's zero diff in the core clk framework.

  Instead we have new clk drivers for STM and Sophgo, with
  Samsung^WGoogle in third for the diffstat because they introduced HSI0
  and HSI2 clk drivers for Google's GS101 SoC (high speed interface
  things like PCIe, UFS, and MMC).

  Beyond those big diffs there's the usual updates to various clk
  drivers for incorrect parent descriptions or mising
  MODULE_DEVICE_TABLE()s, etc. Nothing in particular stands out as super
  interesting here.

  New Drivers:
   - STM32MP257 SoC clk driver
   - Airoha EN7581 SoC clk driver
   - Sophgo CV1800B, CV1812H and SG2000 SoC clk driver
   - Loongson-2k0500 and Loongson-2k2000 SoC clk driver
   - Add HSI0 and HSI2 clock controllers for Google GS101
   - Add i.MX95 BLK CTL clock driver

  Updates:
   - Allocate clk_ops dynamically for SCMI clk driver
   - Add support in qcom RCG and RCG2 for multiple configurations for
     the same frequency
   - Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve
     issues
   - Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some
     boards
   - Cleanups and fixes for Qualcomm Stromer PLLs
   - Reduce max CPU frequency on Qualcomm APSS IPQ5018
   - Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera
     clk drivers
   - Make Qualcomm MSM8998 Venus clocks functional
   - Cleanup downstream remnants related to DisplayPort across Qualcomm
     SM8450, SM6350, SM8550, and SM8650
   - Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL
   - Use a specific Qualcomm QCS404 compatible for the otherwise generic
     HFPLL
   - Remove Qualcomm SM8150 CPUSS AHB clk as it is unused
   - Remove an unused field in the Qualcomm RPM clk driver
   - Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953
     global clock controller drivers
   - Allow choice of manual or firmware-driven control over PLLs, needed
     to fully implement CPU clock controllers on Exynos850
   - Correct PLL clock IDs on ExynosAutov9
   - Propagate certain clock rates to allow setting proper SPI clock
     rates on Google GS101
   - Mark certain Google GS101 clocks critical
   - Convert old S3C64xx clock controller bindings to DT schema
   - Add new PLL rate and missing mux on Rockchip rk3568
   - Add missing reset line on Rockchip rk3588
   - Removal of an unused field in struct rockchip_mmc_clock
   - Amlogic s4/a1: add regmap maximum register for proper debugfs dump
   - Amlogic s4: add MODULE_DEVICE_TABLE() on pll and periph controllers
   - Amlogic pll driver: print clock name on lock error to help debug
   - Amlogic vclk: finish dsi clock path support
   - Amlogic license: fix occurence "GPL v2" as reported by checkpatch
   - Add PM runtime support to i.MX8MP Audiomix
   - Add DT schema for i.MX95 Display Master Block Control
   - Convert to platform remove callback returning void for i.MX8MP
     Audiomix
   - Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on Renesas
     R-Car V4M
   - Add interrupt controller (PLIC) clock and reset on Renesas RZ/Five
   - Prepare power domain support for Renesas RZ/G2L family members, and
     add actual support on Renesas RZ/G3S SoC
   - Add thermal, serial (SCIF), and timer (CMT/TMU) clocks on Renesas
     R-Car V4M
   - Add additional constraints to Allwinner A64 PLL MIPI clock
   - Fix autoloading sunxi-ng clocks when build as a module"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (118 commits)
  clk: samsung: Don't register clkdev lookup for the fixed rate clocks
  clk, reset: microchip: mpfs: fix incorrect preprocessor conditions
  clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs
  clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018
  clk: qcom: Fix SM_GPUCC_8650 dependencies
  clk: qcom: Fix SC_CAMCC_8280XP dependencies
  dt-bindings: clocks: stm32mp25: add access-controllers description
  clock, reset: microchip: move all mpfs reset code to the reset subsystem
  clk: samsung: gs101: drop unused HSI2 clock parent data
  clk: rockchip: rk3568: Add PLL rate for 724 MHz
  clk: rockchip: Remove an unused field in struct rockchip_mmc_clock
  dt-bindings: clock: fixed: Define a preferred node name
  clk: meson: s4: fix module autoloading
  clk: samsung: gs101: mark some apm UASC and XIU clocks critical
  clk: imx: imx8mp: Convert to platform remove callback returning void
  clk: imx: imx8mp: Switch to RUNTIME_PM_OPS()
  clk: bcm: rpi: Assign ->num before accessing ->hws
  clk: bcm: dvp: Assign ->num before accessing ->hws
  clk: samsung: gs101: add support for cmu_hsi2
  clk: samsung: gs101: add support for cmu_hsi0
  ...

25 files changed, 279 insertions, 39 deletions

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index 29ffd14d267b..59a40a49f8e1 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -30,6 +30,10 @@ config COMMON_CLK_MESON_VID_PLL_DIV
 	tristate
 	select COMMON_CLK_MESON_REGMAP
 
+config COMMON_CLK_MESON_VCLK
+	tristate
+	select COMMON_CLK_MESON_REGMAP
+
 config COMMON_CLK_MESON_CLKC_UTILS
 	tristate
 
@@ -140,6 +144,7 @@ config COMMON_CLK_G12A
 	select COMMON_CLK_MESON_EE_CLKC
 	select COMMON_CLK_MESON_CPU_DYNDIV
 	select COMMON_CLK_MESON_VID_PLL_DIV
+	select COMMON_CLK_MESON_VCLK
 	select MFD_SYSCON
 	help
 	  Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 9ee4b954c896..9ba43fe7a07a 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_PLL) += clk-pll.o
 obj-$(CONFIG_COMMON_CLK_MESON_REGMAP) += clk-regmap.o
 obj-$(CONFIG_COMMON_CLK_MESON_SCLK_DIV) += sclk-div.o
 obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
+obj-$(CONFIG_COMMON_CLK_MESON_VCLK) += vclk.o
 
 # Amlogic Clock controllers
 
diff --git a/drivers/clk/meson/a1-peripherals.c b/drivers/clk/meson/a1-peripherals.c
index e2a1f12f9175..621af1e6e4b2 100644
--- a/drivers/clk/meson/a1-peripherals.c
+++ b/drivers/clk/meson/a1-peripherals.c
@@ -2187,6 +2187,7 @@ static struct regmap_config a1_periphs_regmap_cfg = {
 	.reg_bits   = 32,
 	.val_bits   = 32,
 	.reg_stride = 4,
+	.max_register = DMC_CLK_CTRL,
 };
 
 static struct meson_clk_hw_data a1_periphs_clks = {
diff --git a/drivers/clk/meson/a1-pll.c b/drivers/clk/meson/a1-pll.c
index 4325e8a6a3ef..90b0aeeb049c 100644
--- a/drivers/clk/meson/a1-pll.c
+++ b/drivers/clk/meson/a1-pll.c
@@ -299,6 +299,7 @@ static struct regmap_config a1_pll_regmap_cfg = {
 	.reg_bits   = 32,
 	.val_bits   = 32,
 	.reg_stride = 4,
+	.max_register = ANACTRL_HIFIPLL_STS,
 };
 
 static struct meson_clk_hw_data a1_pll_clks = {
diff --git a/drivers/clk/meson/axg-aoclk.c b/drivers/clk/meson/axg-aoclk.c
index d80ab4728f7a..e4d0f46f47f5 100644
--- a/drivers/clk/meson/axg-aoclk.c
+++ b/drivers/clk/meson/axg-aoclk.c
@@ -340,4 +340,4 @@ static struct platform_driver axg_aoclkc_driver = {
 };
 
 module_platform_driver(axg_aoclkc_driver);
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/axg-audio.c b/drivers/clk/meson/axg-audio.c
index ac3482960903..e03a5bf899c0 100644
--- a/drivers/clk/meson/axg-audio.c
+++ b/drivers/clk/meson/axg-audio.c
@@ -1877,4 +1877,4 @@ module_platform_driver(axg_audio_driver);
 
 MODULE_DESCRIPTION("Amlogic AXG/G12A/SM1 Audio Clock driver");
 MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
index 5f60f2bcca59..52d610110e44 100644
--- a/drivers/clk/meson/axg.c
+++ b/drivers/clk/meson/axg.c
@@ -2185,4 +2185,4 @@ static struct platform_driver axg_driver = {
 };
 
 module_platform_driver(axg_driver);
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/clk-cpu-dyndiv.c b/drivers/clk/meson/clk-cpu-dyndiv.c
index 8778c149d26a..aa824b030cb8 100644
--- a/drivers/clk/meson/clk-cpu-dyndiv.c
+++ b/drivers/clk/meson/clk-cpu-dyndiv.c
@@ -69,4 +69,4 @@ EXPORT_SYMBOL_GPL(meson_clk_cpu_dyndiv_ops);
 
 MODULE_DESCRIPTION("Amlogic CPU Dynamic Clock divider");
 MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/clk-dualdiv.c b/drivers/clk/meson/clk-dualdiv.c
index feae49a8f6dc..d46c02b51be5 100644
--- a/drivers/clk/meson/clk-dualdiv.c
+++ b/drivers/clk/meson/clk-dualdiv.c
@@ -140,4 +140,4 @@ EXPORT_SYMBOL_GPL(meson_clk_dualdiv_ro_ops);
 MODULE_DESCRIPTION("Amlogic dual divider driver");
 MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
 MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/clk-mpll.c b/drivers/clk/meson/clk-mpll.c
index 20255e129b37..eae9b7dc5a6c 100644
--- a/drivers/clk/meson/clk-mpll.c
+++ b/drivers/clk/meson/clk-mpll.c
@@ -177,4 +177,4 @@ EXPORT_SYMBOL_GPL(meson_clk_mpll_ops);
 
 MODULE_DESCRIPTION("Amlogic MPLL driver");
 MODULE_AUTHOR("Michael Turquette <mturquette@baylibre.com>");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/clk-phase.c b/drivers/clk/meson/clk-phase.c
index a6763439f7d2..ff3f0b1a3ed1 100644
--- a/drivers/clk/meson/clk-phase.c
+++ b/drivers/clk/meson/clk-phase.c
@@ -183,4 +183,4 @@ EXPORT_SYMBOL_GPL(meson_sclk_ws_inv_ops);
 
 MODULE_DESCRIPTION("Amlogic phase driver");
 MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c
index 6fa7639a3050..07db8b5c3000 100644
--- a/drivers/clk/meson/clk-pll.c
+++ b/drivers/clk/meson/clk-pll.c
@@ -436,8 +436,8 @@ static int meson_clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	ret = meson_clk_pll_enable(hw);
 	if (ret) {
-		pr_warn("%s: pll did not lock, trying to restore old rate %lu\n",
-			__func__, old_rate);
+		pr_warn("%s: pll %s didn't lock, trying to set old rate %lu\n",
+			__func__, clk_hw_get_name(hw), old_rate);
 		/*
 		 * FIXME: Do we really need/want this HACK ?
 		 * It looks unsafe. what happens if the clock gets into a
@@ -486,4 +486,4 @@ EXPORT_SYMBOL_GPL(meson_clk_pll_ro_ops);
 MODULE_DESCRIPTION("Amlogic PLL driver");
 MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>");
 MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/clk-regmap.c b/drivers/clk/meson/clk-regmap.c
index 8ad8977cf1c2..ad116d24f700 100644
--- a/drivers/clk/meson/clk-regmap.c
+++ b/drivers/clk/meson/clk-regmap.c
@@ -183,4 +183,4 @@ EXPORT_SYMBOL_GPL(clk_regmap_mux_ro_ops);
 
 MODULE_DESCRIPTION("Amlogic regmap backed clock driver");
 MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/g12a-aoclk.c b/drivers/clk/meson/g12a-aoclk.c
index c6b1d55cd7c8..58976ed8b92a 100644
--- a/drivers/clk/meson/g12a-aoclk.c
+++ b/drivers/clk/meson/g12a-aoclk.c
@@ -475,4 +475,4 @@ static struct platform_driver g12a_aoclkc_driver = {
 };
 
 module_platform_driver(g12a_aoclkc_driver);
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index 90f4c6103014..56e66ecc306e 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -22,6 +22,7 @@
 #include "clk-regmap.h"
 #include "clk-cpu-dyndiv.h"
 #include "vid-pll-div.h"
+#include "vclk.h"
 #include "meson-eeclk.h"
 #include "g12a.h"
 
@@ -3165,7 +3166,7 @@ static struct clk_regmap g12a_vclk2_sel = {
 		.ops = &clk_regmap_mux_ops,
 		.parent_hws = g12a_vclk_parent_hws,
 		.num_parents = ARRAY_SIZE(g12a_vclk_parent_hws),
-		.flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
+		.flags = CLK_SET_RATE_NO_REPARENT,
 	},
 };
 
@@ -3193,7 +3194,6 @@ static struct clk_regmap g12a_vclk2_input = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2_sel.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
 	},
 };
 
@@ -3215,19 +3215,32 @@ static struct clk_regmap g12a_vclk_div = {
 };
 
 static struct clk_regmap g12a_vclk2_div = {
-	.data = &(struct clk_regmap_div_data){
-		.offset = HHI_VIID_CLK_DIV,
-		.shift = 0,
-		.width = 8,
+	.data = &(struct meson_vclk_div_data){
+		.div = {
+			.reg_off = HHI_VIID_CLK_DIV,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.enable = {
+			.reg_off = HHI_VIID_CLK_DIV,
+			.shift   = 16,
+			.width   = 1,
+		},
+		.reset = {
+			.reg_off = HHI_VIID_CLK_DIV,
+			.shift   = 17,
+			.width   = 1,
+		},
+		.flags = CLK_DIVIDER_ROUND_CLOSEST,
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "vclk2_div",
-		.ops = &clk_regmap_divider_ops,
+		.ops = &meson_vclk_div_ops,
 		.parent_hws = (const struct clk_hw *[]) {
 			&g12a_vclk2_input.hw
 		},
 		.num_parents = 1,
-		.flags = CLK_GET_RATE_NOCACHE,
+		.flags = CLK_SET_RATE_GATE,
 	},
 };
 
@@ -3246,16 +3259,24 @@ static struct clk_regmap g12a_vclk = {
 };
 
 static struct clk_regmap g12a_vclk2 = {
-	.data = &(struct clk_regmap_gate_data){
-		.offset = HHI_VIID_CLK_CNTL,
-		.bit_idx = 19,
+	.data = &(struct meson_vclk_gate_data){
+		.enable = {
+			.reg_off = HHI_VIID_CLK_CNTL,
+			.shift   = 19,
+			.width   = 1,
+		},
+		.reset = {
+			.reg_off = HHI_VIID_CLK_CNTL,
+			.shift   = 15,
+			.width   = 1,
+		},
 	},
 	.hw.init = &(struct clk_init_data) {
 		.name = "vclk2",
-		.ops = &clk_regmap_gate_ops,
+		.ops = &meson_vclk_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2_div.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3339,7 +3360,7 @@ static struct clk_regmap g12a_vclk2_div1 = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3353,7 +3374,7 @@ static struct clk_regmap g12a_vclk2_div2_en = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3367,7 +3388,7 @@ static struct clk_regmap g12a_vclk2_div4_en = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3381,7 +3402,7 @@ static struct clk_regmap g12a_vclk2_div6_en = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3395,7 +3416,7 @@ static struct clk_regmap g12a_vclk2_div12_en = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3461,6 +3482,7 @@ static struct clk_fixed_factor g12a_vclk2_div2 = {
 			&g12a_vclk2_div2_en.hw
 		},
 		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3474,6 +3496,7 @@ static struct clk_fixed_factor g12a_vclk2_div4 = {
 			&g12a_vclk2_div4_en.hw
 		},
 		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3487,6 +3510,7 @@ static struct clk_fixed_factor g12a_vclk2_div6 = {
 			&g12a_vclk2_div6_en.hw
 		},
 		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3500,6 +3524,7 @@ static struct clk_fixed_factor g12a_vclk2_div12 = {
 			&g12a_vclk2_div12_en.hw
 		},
 		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3561,7 +3586,7 @@ static struct clk_regmap g12a_cts_encl_sel = {
 		.ops = &clk_regmap_mux_ops,
 		.parent_hws = g12a_cts_parent_hws,
 		.num_parents = ARRAY_SIZE(g12a_cts_parent_hws),
-		.flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
+		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
 	},
 };
 
@@ -3717,15 +3742,26 @@ static struct clk_regmap g12a_mipi_dsi_pxclk_sel = {
 		.ops = &clk_regmap_mux_ops,
 		.parent_hws = g12a_mipi_dsi_pxclk_parent_hws,
 		.num_parents = ARRAY_SIZE(g12a_mipi_dsi_pxclk_parent_hws),
-		.flags = CLK_SET_RATE_NO_REPARENT,
+		.flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
 	},
 };
 
+/*
+ * FIXME: Force as bypass by forcing a single /1 table entry, and doensn't on boot value
+ * when setting a clock whith this node in the clock path, but doesn't garantee the divider
+ * is at /1 at boot until a rate is set.
+ */
+static const struct clk_div_table g12a_mipi_dsi_pxclk_div_table[] = {
+	{ .val = 0, .div = 1 },
+	{ /* sentinel */ },
+};
+
 static struct clk_regmap g12a_mipi_dsi_pxclk_div = {
 	.data = &(struct clk_regmap_div_data){
 		.offset = HHI_MIPIDSI_PHY_CLK_CNTL,
 		.shift = 0,
 		.width = 7,
+		.table = g12a_mipi_dsi_pxclk_div_table,
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "mipi_dsi_pxclk_div",
@@ -5578,4 +5614,4 @@ static struct platform_driver g12a_driver = {
 };
 
 module_platform_driver(g12a_driver);
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
index 4aec1740ac34..dbda563729db 100644
--- a/drivers/clk/meson/gxbb-aoclk.c
+++ b/drivers/clk/meson/gxbb-aoclk.c
@@ -300,4 +300,4 @@ static struct platform_driver gxbb_aoclkc_driver = {
 	},
 };
 module_platform_driver(gxbb_aoclkc_driver);
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 1b1279d94781..29507b8c4304 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -3569,4 +3569,4 @@ static struct platform_driver gxbb_driver = {
 };
 
 module_platform_driver(gxbb_driver);
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/meson-aoclk.c b/drivers/clk/meson/meson-aoclk.c
index bf466fef263c..b8a9d59e6726 100644
--- a/drivers/clk/meson/meson-aoclk.c
+++ b/drivers/clk/meson/meson-aoclk.c
@@ -89,4 +89,4 @@ int meson_aoclkc_probe(struct platform_device *pdev)
 	return devm_of_clk_add_hw_provider(dev, meson_clk_hw_get, (void *)&data->hw_clks);
 }
 EXPORT_SYMBOL_GPL(meson_aoclkc_probe);
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/meson-eeclk.c b/drivers/clk/meson/meson-eeclk.c
index 845ca8bfa346..3cbc7f233bba 100644
--- a/drivers/clk/meson/meson-eeclk.c
+++ b/drivers/clk/meson/meson-eeclk.c
@@ -58,4 +58,4 @@ int meson_eeclkc_probe(struct platform_device *pdev)
 	return devm_of_clk_add_hw_provider(dev, meson_clk_hw_get, (void *)&data->hw_clks);
 }
 EXPORT_SYMBOL_GPL(meson_eeclkc_probe);
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/s4-peripherals.c b/drivers/clk/meson/s4-peripherals.c
index 6c35de3d536f..5e17ca50ab09 100644
--- a/drivers/clk/meson/s4-peripherals.c
+++ b/drivers/clk/meson/s4-peripherals.c
@@ -3751,6 +3751,7 @@ static struct regmap_config clkc_regmap_config = {
 	.reg_bits       = 32,
 	.val_bits       = 32,
 	.reg_stride     = 4,
+	.max_register   = CLKCTRL_DEMOD_CLK_CTRL,
 };
 
 static struct meson_clk_hw_data s4_periphs_clks = {
@@ -3799,6 +3800,7 @@ static const struct of_device_id clkc_match_table[] = {
 	},
 	{}
 };
+MODULE_DEVICE_TABLE(of, clkc_match_table);
 
 static struct platform_driver s4_driver = {
 	.probe		= meson_s4_periphs_probe,
diff --git a/drivers/clk/meson/s4-pll.c b/drivers/clk/meson/s4-pll.c
index 8dfaeccaadc2..d2650d96400c 100644
--- a/drivers/clk/meson/s4-pll.c
+++ b/drivers/clk/meson/s4-pll.c
@@ -798,6 +798,7 @@ static struct regmap_config clkc_regmap_config = {
 	.reg_bits       = 32,
 	.val_bits       = 32,
 	.reg_stride     = 4,
+	.max_register   = ANACTRL_HDMIPLL_CTRL0,
 };
 
 static struct meson_clk_hw_data s4_pll_clks = {
@@ -853,6 +854,7 @@ static const struct of_device_id clkc_match_table[] = {
 	},
 	{}
 };
+MODULE_DEVICE_TABLE(of, clkc_match_table);
 
 static struct platform_driver s4_driver = {
 	.probe		= meson_s4_pll_probe,
diff --git a/drivers/clk/meson/sclk-div.c b/drivers/clk/meson/sclk-div.c
index d12c45c4c261..987f5b06587c 100644
--- a/drivers/clk/meson/sclk-div.c
+++ b/drivers/clk/meson/sclk-div.c
@@ -251,4 +251,4 @@ EXPORT_SYMBOL_GPL(meson_sclk_div_ops);
 
 MODULE_DESCRIPTION("Amlogic Sample divider driver");
 MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/vclk.c b/drivers/clk/meson/vclk.c
new file mode 100644
index 000000000000..e886df55d6e3
--- /dev/null
+++ b/drivers/clk/meson/vclk.c
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+#include <linux/module.h>
+#include "vclk.h"
+
+/* The VCLK gate has a supplementary reset bit to pulse after ungating */
+
+static inline struct meson_vclk_gate_data *
+clk_get_meson_vclk_gate_data(struct clk_regmap *clk)
+{
+	return (struct meson_vclk_gate_data *)clk->data;
+}
+
+static int meson_vclk_gate_enable(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
+
+	meson_parm_write(clk->map, &vclk->enable, 1);
+
+	/* Do a reset pulse */
+	meson_parm_write(clk->map, &vclk->reset, 1);
+	meson_parm_write(clk->map, &vclk->reset, 0);
+
+	return 0;
+}
+
+static void meson_vclk_gate_disable(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
+
+	meson_parm_write(clk->map, &vclk->enable, 0);
+}
+
+static int meson_vclk_gate_is_enabled(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
+
+	return meson_parm_read(clk->map, &vclk->enable);
+}
+
+const struct clk_ops meson_vclk_gate_ops = {
+	.enable = meson_vclk_gate_enable,
+	.disable = meson_vclk_gate_disable,
+	.is_enabled = meson_vclk_gate_is_enabled,
+};
+EXPORT_SYMBOL_GPL(meson_vclk_gate_ops);
+
+/* The VCLK Divider has supplementary reset & enable bits */
+
+static inline struct meson_vclk_div_data *
+clk_get_meson_vclk_div_data(struct clk_regmap *clk)
+{
+	return (struct meson_vclk_div_data *)clk->data;
+}
+
+static unsigned long meson_vclk_div_recalc_rate(struct clk_hw *hw,
+						unsigned long prate)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+
+	return divider_recalc_rate(hw, prate, meson_parm_read(clk->map, &vclk->div),
+				   vclk->table, vclk->flags, vclk->div.width);
+}
+
+static int meson_vclk_div_determine_rate(struct clk_hw *hw,
+					 struct clk_rate_request *req)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+
+	return divider_determine_rate(hw, req, vclk->table, vclk->div.width,
+				      vclk->flags);
+}
+
+static int meson_vclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long parent_rate)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+	int ret;
+
+	ret = divider_get_val(rate, parent_rate, vclk->table, vclk->div.width,
+			      vclk->flags);
+	if (ret < 0)
+		return ret;
+
+	meson_parm_write(clk->map, &vclk->div, ret);
+
+	return 0;
+};
+
+static int meson_vclk_div_enable(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+
+	/* Unreset the divider when ungating */
+	meson_parm_write(clk->map, &vclk->reset, 0);
+	meson_parm_write(clk->map, &vclk->enable, 1);
+
+	return 0;
+}
+
+static void meson_vclk_div_disable(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+
+	/* Reset the divider when gating */
+	meson_parm_write(clk->map, &vclk->enable, 0);
+	meson_parm_write(clk->map, &vclk->reset, 1);
+}
+
+static int meson_vclk_div_is_enabled(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+
+	return meson_parm_read(clk->map, &vclk->enable);
+}
+
+const struct clk_ops meson_vclk_div_ops = {
+	.recalc_rate = meson_vclk_div_recalc_rate,
+	.determine_rate = meson_vclk_div_determine_rate,
+	.set_rate = meson_vclk_div_set_rate,
+	.enable = meson_vclk_div_enable,
+	.disable = meson_vclk_div_disable,
+	.is_enabled = meson_vclk_div_is_enabled,
+};
+EXPORT_SYMBOL_GPL(meson_vclk_div_ops);
+
+MODULE_DESCRIPTION("Amlogic vclk clock driver");
+MODULE_AUTHOR("Neil Armstrong <neil.armstrong@linaro.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/vclk.h b/drivers/clk/meson/vclk.h
new file mode 100644
index 000000000000..20b0b181db09
--- /dev/null
+++ b/drivers/clk/meson/vclk.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2024 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+#ifndef __VCLK_H
+#define __VCLK_H
+
+#include "clk-regmap.h"
+#include "parm.h"
+
+/**
+ * struct meson_vclk_gate_data - vclk_gate regmap backed specific data
+ *
+ * @enable:	vclk enable field
+ * @reset:	vclk reset field
+ * @flags:	hardware-specific flags
+ *
+ * Flags:
+ * Same as clk_gate except CLK_GATE_HIWORD_MASK which is ignored
+ */
+struct meson_vclk_gate_data {
+	struct parm enable;
+	struct parm reset;
+	u8 flags;
+};
+
+extern const struct clk_ops meson_vclk_gate_ops;
+
+/**
+ * struct meson_vclk_div_data - vclk_div regmap back specific data
+ *
+ * @div:	divider field
+ * @enable:	vclk divider enable field
+ * @reset:	vclk divider reset field
+ * @table:	array of value/divider pairs, last entry should have div = 0
+ *
+ * Flags:
+ * Same as clk_divider except CLK_DIVIDER_HIWORD_MASK which is ignored
+ */
+struct meson_vclk_div_data {
+	struct parm div;
+	struct parm enable;
+	struct parm reset;
+	const struct clk_div_table *table;
+	u8 flags;
+};
+
+extern const struct clk_ops meson_vclk_div_ops;
+
+#endif /* __VCLK_H */
diff --git a/drivers/clk/meson/vid-pll-div.c b/drivers/clk/meson/vid-pll-div.c
index daff235bc763..ee129f86794d 100644
--- a/drivers/clk/meson/vid-pll-div.c
+++ b/drivers/clk/meson/vid-pll-div.c
@@ -96,4 +96,4 @@ EXPORT_SYMBOL_GPL(meson_vid_pll_div_ro_ops);
 
 MODULE_DESCRIPTION("Amlogic video pll divider driver");
 MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");