Add bridged amplifiers to cs42l43

Merge series from Charles Keepax <[email protected]>:

In some cs42l43 systems a couple of cs35l56 amplifiers are attached
to the cs42l43's SPI and I2S. On Windows the cs42l43 is controlled
by a SDCA class driver and these two amplifiers are controlled by
firmware running on the cs42l43. However, under Linux the decision
was made to interact with the cs42l43 directly, affording the user
greater control over the audio system. However, this has resulted
in an issue where these two bridged cs35l56 amplifiers are not
populated in ACPI and must be added manually. There is at least an
SDCA extension unit DT entry we can key off.

The process of adding this is handled using a software node, firstly the
ability to add native chip selects to software nodes must be added.
Secondly, an additional flag for naming the SPI devices is added this
allows the machine driver to key to the correct amplifier. Then finally,
the cs42l43 SPI driver adds the two amplifiers directly onto its SPI
bus.

An additional series will follow soon to add the audio machine driver
parts (in the sof-sdw driver), however that is fairly orthogonal to
this part of the process, getting the actual amplifiers registered.

1 files changed, 12 insertions, 25 deletions

diff --git a/arch/x86/kernel/sev.c b/arch/x86/kernel/sev.c
index b59b09c2f284..38ad066179d8 100644
--- a/arch/x86/kernel/sev.c
+++ b/arch/x86/kernel/sev.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/psp-sev.h>
+#include <linux/dmi.h>
 #include <uapi/linux/sev-guest.h>
 
 #include <asm/init.h>
@@ -795,21 +796,6 @@ void __init early_snp_set_memory_shared(unsigned long vaddr, unsigned long paddr
 	early_set_pages_state(vaddr, paddr, npages, SNP_PAGE_STATE_SHARED);
 }
 
-void __init snp_prep_memory(unsigned long paddr, unsigned int sz, enum psc_op op)
-{
-	unsigned long vaddr, npages;
-
-	vaddr = (unsigned long)__va(paddr);
-	npages = PAGE_ALIGN(sz) >> PAGE_SHIFT;
-
-	if (op == SNP_PAGE_STATE_PRIVATE)
-		early_snp_set_memory_private(vaddr, paddr, npages);
-	else if (op == SNP_PAGE_STATE_SHARED)
-		early_snp_set_memory_shared(vaddr, paddr, npages);
-	else
-		WARN(1, "invalid memory op %d\n", op);
-}
-
 static unsigned long __set_pages_state(struct snp_psc_desc *data, unsigned long vaddr,
 				       unsigned long vaddr_end, int op)
 {
@@ -2136,6 +2122,17 @@ void __head __noreturn snp_abort(void)
 	sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SNP_UNSUPPORTED);
 }
 
+/*
+ * SEV-SNP guests should only execute dmi_setup() if EFI_CONFIG_TABLES are
+ * enabled, as the alternative (fallback) logic for DMI probing in the legacy
+ * ROM region can cause a crash since this region is not pre-validated.
+ */
+void __init snp_dmi_setup(void)
+{
+	if (efi_enabled(EFI_CONFIG_TABLES))
+		dmi_setup();
+}
+
 static void dump_cpuid_table(void)
 {
 	const struct snp_cpuid_table *cpuid_table = snp_cpuid_get_table();
@@ -2287,16 +2284,6 @@ static int __init snp_init_platform_device(void)
 }
 device_initcall(snp_init_platform_device);
 
-void kdump_sev_callback(void)
-{
-	/*
-	 * Do wbinvd() on remote CPUs when SNP is enabled in order to
-	 * safely do SNP_SHUTDOWN on the local CPU.
-	 */
-	if (cpu_feature_enabled(X86_FEATURE_SEV_SNP))
-		wbinvd();
-}
-
 void sev_show_status(void)
 {
 	int i;