powerpc: fix typos in comments

Various spelling mistakes in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220430185654.5855-1-Julia.Lawall@inria.fr

29 files changed, 35 insertions, 35 deletions

diff --git a/arch/powerpc/platforms/512x/clock-commonclk.c b/arch/powerpc/platforms/512x/clock-commonclk.c
index 0b03d812baae..0652c7e69225 100644
--- a/arch/powerpc/platforms/512x/clock-commonclk.c
+++ b/arch/powerpc/platforms/512x/clock-commonclk.c
@@ -663,7 +663,7 @@ static void __init mpc512x_clk_setup_mclk(struct mclk_setup_data *entry, size_t
 	 *   the PSC/MSCAN/SPDIF (serial drivers et al) need the MCLK
 	 *   for their bitrate
 	 * - in the absence of "aliases" for clocks we need to create
-	 *   individial 'struct clk' items for whatever might get
+	 *   individual 'struct clk' items for whatever might get
 	 *   referenced or looked up, even if several of those items are
 	 *   identical from the logical POV (their rate value)
 	 * - for easier future maintenance and for better reflection of
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
index e3411663edad..96d9cf49560d 100644
--- a/arch/powerpc/platforms/512x/mpc512x_shared.c
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -289,7 +289,7 @@ static void __init mpc512x_setup_diu(void)
 
 	/*
 	 * We do not allocate and configure new area for bitmap buffer
-	 * because it would requere copying bitmap data (splash image)
+	 * because it would require copying bitmap data (splash image)
 	 * and so negatively affect boot time. Instead we reserve the
 	 * already configured frame buffer area so that it won't be
 	 * destroyed. The starting address of the area to reserve and
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index 565e3a83dc9e..60aa6015e284 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -308,7 +308,7 @@ int mpc5200_psc_ac97_gpio_reset(int psc_number)
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
-	/* Reconfiure pin-muxing to gpio */
+	/* Reconfigure pin-muxing to gpio */
 	mux = in_be32(&simple_gpio->port_config);
 	out_be32(&simple_gpio->port_config, mux & (~gpio));
 
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index 0cb248269db7..03e9bf7c0773 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -398,7 +398,7 @@ static int mpc52xx_gpt_do_start(struct mpc52xx_gpt_priv *gpt, u64 period,
 		set |= MPC52xx_GPT_MODE_CONTINUOUS;
 
 	/* Determine the number of clocks in the requested period.  64 bit
-	 * arithmatic is done here to preserve the precision until the value
+	 * arithmetic is done here to preserve the precision until the value
 	 * is scaled back down into the u32 range.  Period is in 'ns', bus
 	 * frequency is in Hz. */
 	clocks = period * (u64)gpt->ipb_freq;
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
index b91ebebd9ff2..54dfc63809d3 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
@@ -104,7 +104,7 @@ static void mpc52xx_lpbfifo_kick(struct mpc52xx_lpbfifo_request *req)
 		 *
 		 * Configure the watermarks so DMA will always complete correctly.
 		 * It may be worth experimenting with the ALARM value to see if
-		 * there is a performance impacit.  However, if it is wrong there
+		 * there is a performance impact.  However, if it is wrong there
 		 * is a risk of DMA not transferring the last chunk of data
 		 */
 		if (write) {
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 5bd487030256..ad0b88ecfd0c 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -151,7 +151,7 @@ static void __init mpc85xx_cds_pci_irq_fixup(struct pci_dev *dev)
 		 */
 		case PCI_DEVICE_ID_VIA_82C586_2:
 		/* There are two USB controllers.
-		 * Identify them by functon number
+		 * Identify them by function number
 		 */
 			if (PCI_FUNC(dev->devfn) == 3)
 				dev->irq = 11;
diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
index 44bbbc535e1d..884da08806ce 100644
--- a/arch/powerpc/platforms/86xx/gef_ppc9a.c
+++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
@@ -180,7 +180,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
  *
  * This function is called to determine whether the BSP is compatible with the
  * supplied device-tree, which is assumed to be the correct one for the actual
- * board. It is expected thati, in the future, a kernel may support multiple
+ * board. It is expected that, in the future, a kernel may support multiple
  * boards.
  */
 static int __init gef_ppc9a_probe(void)
diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c
index 46d6d3d4957a..baaf1ab07016 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc310.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc310.c
@@ -167,7 +167,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
  *
  * This function is called to determine whether the BSP is compatible with the
  * supplied device-tree, which is assumed to be the correct one for the actual
- * board. It is expected thati, in the future, a kernel may support multiple
+ * board. It is expected that, in the future, a kernel may support multiple
  * boards.
  */
 static int __init gef_sbc310_probe(void)
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
index acf2c6c3c1eb..120caf6af71d 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc610.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -157,7 +157,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
  *
  * This function is called to determine whether the BSP is compatible with the
  * supplied device-tree, which is assumed to be the correct one for the actual
- * board. It is expected thati, in the future, a kernel may support multiple
+ * board. It is expected that, in the future, a kernel may support multiple
  * boards.
  */
 static int __init gef_sbc610_probe(void)
diff --git a/arch/powerpc/platforms/book3s/vas-api.c b/arch/powerpc/platforms/book3s/vas-api.c
index f9a1615b74da..c0799fb26b6d 100644
--- a/arch/powerpc/platforms/book3s/vas-api.c
+++ b/arch/powerpc/platforms/book3s/vas-api.c
@@ -30,7 +30,7 @@
  *
  * where "vas_copy" and "vas_paste" are defined in copy-paste.h.
  * copy/paste returns to the user space directly. So refer NX hardware
- * documententation for exact copy/paste usage and completion / error
+ * documentation for exact copy/paste usage and completion / error
  * conditions.
  */
 
diff --git a/arch/powerpc/platforms/cell/cbe_regs.c b/arch/powerpc/platforms/cell/cbe_regs.c
index 1c4c53bec66c..03512a41bd7e 100644
--- a/arch/powerpc/platforms/cell/cbe_regs.c
+++ b/arch/powerpc/platforms/cell/cbe_regs.c
@@ -23,7 +23,7 @@
  * Current implementation uses "cpu" nodes. We build our own mapping
  * array of cpu numbers to cpu nodes locally for now to allow interrupt
  * time code to have a fast path rather than call of_get_cpu_node(). If
- * we implement cpu hotplug, we'll have to install an appropriate norifier
+ * we implement cpu hotplug, we'll have to install an appropriate notifier
  * in order to release references to the cpu going away
  */
 static struct cbe_regs_map
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 25e726bf0172..3f141cf5e580 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -582,7 +582,7 @@ static int cell_of_bus_notify(struct notifier_block *nb, unsigned long action,
 {
 	struct device *dev = data;
 
-	/* We are only intereted in device addition */
+	/* We are only interested in device addition */
 	if (action != BUS_NOTIFY_ADD_DEVICE)
 		return 0;
 
diff --git a/arch/powerpc/platforms/cell/spider-pci.c b/arch/powerpc/platforms/cell/spider-pci.c
index a1c293f42a1f..3a2ea8376e32 100644
--- a/arch/powerpc/platforms/cell/spider-pci.c
+++ b/arch/powerpc/platforms/cell/spider-pci.c
@@ -81,7 +81,7 @@ static int __init spiderpci_pci_setup_chip(struct pci_controller *phb,
 	/*
 	 * On CellBlade, we can't know that which XDR memory is used by
 	 * kmalloc() to allocate dummy_page_va.
-	 * In order to imporve the performance, the XDR which is used to
+	 * In order to improve the performance, the XDR which is used to
 	 * allocate dummy_page_va is the nearest the spider-pci.
 	 * We have to select the CBE which is the nearest the spider-pci
 	 * to allocate memory from the best XDR, but I don't know that
diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c
index ddf8742f09a3..080ed2d2c682 100644
--- a/arch/powerpc/platforms/cell/spu_manage.c
+++ b/arch/powerpc/platforms/cell/spu_manage.c
@@ -457,7 +457,7 @@ static void __init init_affinity_node(int cbe)
 
 		/*
 		 * Walk through each phandle in vicinity property of the spu
-		 * (tipically two vicinity phandles per spe node)
+		 * (typically two vicinity phandles per spe node)
 		 */
 		for (i = 0; i < (lenp / sizeof(phandle)); i++) {
 			if (vic_handles[i] == avoid_ph)
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index df89d916236d..9aded0188ce8 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -1472,7 +1472,7 @@ int __init pmac_i2c_init(void)
 	smu_i2c_probe();
 #endif
 
-	/* Now add plaform functions for some known devices */
+	/* Now add platform functions for some known devices */
 	pmac_i2c_devscan(pmac_i2c_dev_create);
 
 	return 0;
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 89e22c460ebf..33f7b959c810 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -390,7 +390,7 @@ static struct eeh_dev *pnv_eeh_probe(struct pci_dev *pdev)
 	 * should be blocked until PE reset. MMIO access is dropped
 	 * by hardware certainly. In order to drop PCI config requests,
 	 * one more flag (EEH_PE_CFG_RESTRICTED) is introduced, which
-	 * will be checked in the backend for PE state retrival. If
+	 * will be checked in the backend for PE state retrieval. If
 	 * the PE becomes frozen for the first time and the flag has
 	 * been set for the PE, we will set EEH_PE_CFG_BLOCKED for
 	 * that PE to block its config space.
@@ -981,7 +981,7 @@ static int pnv_eeh_do_af_flr(struct pci_dn *pdn, int option)
 	case EEH_RESET_FUNDAMENTAL:
 		/*
 		 * Wait for Transaction Pending bit to clear. A word-aligned
-		 * test is used, so we use the conrol offset rather than status
+		 * test is used, so we use the control offset rather than status
 		 * and shift the test bit to match.
 		 */
 		pnv_eeh_wait_for_pending(pdn, "AF",
@@ -1048,7 +1048,7 @@ static int pnv_eeh_reset(struct eeh_pe *pe, int option)
 	 * frozen state during PE reset. However, the good idea here from
 	 * benh is to keep frozen state before we get PE reset done completely
 	 * (until BAR restore). With the frozen state, HW drops illegal IO
-	 * or MMIO access, which can incur recrusive frozen PE during PE
+	 * or MMIO access, which can incur recursive frozen PE during PE
 	 * reset. The side effect is that EEH core has to clear the frozen
 	 * state explicitly after BAR restore.
 	 */
@@ -1095,8 +1095,8 @@ static int pnv_eeh_reset(struct eeh_pe *pe, int option)
 	 * bus is behind a hotplug slot and it will use the slot provided
 	 * reset methods to prevent spurious hotplug events during the reset.
 	 *
-	 * Fundemental resets need to be handled internally to EEH since the
-	 * PCI core doesn't really have a concept of a fundemental reset,
+	 * Fundamental resets need to be handled internally to EEH since the
+	 * PCI core doesn't really have a concept of a fundamental reset,
 	 * mainly because there's no standard way to generate one. Only a
 	 * few devices require an FRESET so it should be fine.
 	 */
diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
index a6677a111aca..6f94b808dd39 100644
--- a/arch/powerpc/platforms/powernv/idle.c
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -112,7 +112,7 @@ static int __init pnv_save_sprs_for_deep_states(void)
 			if (rc != 0)
 				return rc;
 
-			/* Only p8 needs to set extra HID regiters */
+			/* Only p8 needs to set extra HID registers */
 			if (!cpu_has_feature(CPU_FTR_ARCH_300)) {
 				uint64_t hid1_val = mfspr(SPRN_HID1);
 				uint64_t hid4_val = mfspr(SPRN_HID4);
@@ -1204,7 +1204,7 @@ static void __init pnv_arch300_idle_init(void)
 		 * The idle code does not deal with TB loss occurring
 		 * in a shallower state than SPR loss, so force it to
 		 * behave like SPRs are lost if TB is lost. POWER9 would
-		 * never encouter this, but a POWER8 core would if it
+		 * never encounter this, but a POWER8 core would if it
 		 * implemented the stop instruction. So this is for forward
 		 * compatibility.
 		 */
diff --git a/arch/powerpc/platforms/powernv/ocxl.c b/arch/powerpc/platforms/powernv/ocxl.c
index 28b009b46464..27c936075031 100644
--- a/arch/powerpc/platforms/powernv/ocxl.c
+++ b/arch/powerpc/platforms/powernv/ocxl.c
@@ -289,7 +289,7 @@ int pnv_ocxl_get_pasid_count(struct pci_dev *dev, int *count)
 	 * be used by a function depends on how many functions exist
 	 * on the device. The NPU needs to be configured to know how
 	 * many bits are available to PASIDs and how many are to be
-	 * used by the function BDF indentifier.
+	 * used by the function BDF identifier.
 	 *
 	 * We only support one AFU-carrying function for now.
 	 */
diff --git a/arch/powerpc/platforms/powernv/opal-fadump.c b/arch/powerpc/platforms/powernv/opal-fadump.c
index 5e147f32e932..964f464b1b0e 100644
--- a/arch/powerpc/platforms/powernv/opal-fadump.c
+++ b/arch/powerpc/platforms/powernv/opal-fadump.c
@@ -206,7 +206,7 @@ static u64 opal_fadump_init_mem_struct(struct fw_dump *fadump_conf)
 	opal_fdm->region_cnt = cpu_to_be16(reg_cnt);
 
 	/*
-	 * Kernel metadata is passed to f/w and retrieved in capture kerenl.
+	 * Kernel metadata is passed to f/w and retrieved in capture kernel.
 	 * So, use it to save fadump header address instead of calculating it.
 	 */
 	opal_fdm->fadumphdr_addr = cpu_to_be64(be64_to_cpu(opal_fdm->rgn[0].dest) +
diff --git a/arch/powerpc/platforms/powernv/opal-lpc.c b/arch/powerpc/platforms/powernv/opal-lpc.c
index 5390c888db16..d129d6d45a50 100644
--- a/arch/powerpc/platforms/powernv/opal-lpc.c
+++ b/arch/powerpc/platforms/powernv/opal-lpc.c
@@ -197,7 +197,7 @@ static ssize_t lpc_debug_read(struct file *filp, char __user *ubuf,
 
 		/*
 		 * Select access size based on count and alignment and
-		 * access type. IO and MEM only support byte acceses,
+		 * access type. IO and MEM only support byte accesses,
 		 * FW supports all 3.
 		 */
 		len = 1;
diff --git a/arch/powerpc/platforms/powernv/opal-memory-errors.c b/arch/powerpc/platforms/powernv/opal-memory-errors.c
index 1e8e17df9ce8..a1754a28265d 100644
--- a/arch/powerpc/platforms/powernv/opal-memory-errors.c
+++ b/arch/powerpc/platforms/powernv/opal-memory-errors.c
@@ -82,7 +82,7 @@ static DECLARE_WORK(mem_error_work, mem_error_handler);
 
 /*
  * opal_memory_err_event - notifier handler that queues up the opal message
- * to be preocessed later.
+ * to be processed later.
  */
 static int opal_memory_err_event(struct notifier_block *nb,
 			  unsigned long msg_type, void *msg)
diff --git a/arch/powerpc/platforms/powernv/pci-sriov.c b/arch/powerpc/platforms/powernv/pci-sriov.c
index 04155aaaadb1..fe3d111b881c 100644
--- a/arch/powerpc/platforms/powernv/pci-sriov.c
+++ b/arch/powerpc/platforms/powernv/pci-sriov.c
@@ -699,7 +699,7 @@ static int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
 		return -ENOSPC;
 	}
 
-	/* allocate a contigious block of PEs for our VFs */
+	/* allocate a contiguous block of PEs for our VFs */
 	base_pe = pnv_ioda_alloc_pe(phb, num_vfs);
 	if (!base_pe) {
 		pci_err(pdev, "Unable to allocate PEs for %d VFs\n", num_vfs);
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 5ce924611b94..63ef61ed7597 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -364,7 +364,7 @@ static void  __maybe_unused _dma_dump_region(const struct ps3_dma_region *r,
  * @bus_addr: Starting ioc bus address of the area to map.
  * @len: Length in bytes of the area to map.
  * @link: A struct list_head used with struct ps3_dma_region.chunk_list, the
- * list of all chuncks owned by the region.
+ * list of all chunks owned by the region.
  *
  * This implementation uses a very simple dma page manager
  * based on the dma_chunk structure.  This scheme assumes
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index b637bf292047..2502e9b17df4 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -601,7 +601,7 @@ static dma_addr_t ps3_ioc0_map_page(struct device *_dev, struct page *page,
 		iopte_flag |= CBE_IOPTE_PP_W | CBE_IOPTE_SO_RW;
 		break;
 	default:
-		/* not happned */
+		/* not happened */
 		BUG();
 	}
 	result = ps3_dma_map(dev->d_region, (unsigned long)ptr, size,
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index f9af879c0222..73ae91200b9f 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -512,7 +512,7 @@ static int pseries_eeh_set_option(struct eeh_pe *pe, int option)
 	int ret = 0;
 
 	/*
-	 * When we're enabling or disabling EEH functioality on
+	 * When we're enabling or disabling EEH functionality on
 	 * the particular PE, the PE config address is possibly
 	 * unavailable. Therefore, we have to figure it out from
 	 * the FDT node.
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 4d991cf840d9..7639e7355df2 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -1430,7 +1430,7 @@ static bool enable_ddw(struct pci_dev *dev, struct device_node *pdn)
 
 		pci->table_group->tables[1] = newtbl;
 
-		/* Keep default DMA window stuct if removed */
+		/* Keep default DMA window struct if removed */
 		if (default_win_removed) {
 			tbl->it_size = 0;
 			vfree(tbl->it_map);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 955ff8aa1644..36433bb1560d 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -658,7 +658,7 @@ static resource_size_t pseries_get_iov_fw_value(struct pci_dev *dev, int resno,
 	 */
 	num_res = of_read_number(&indexes[NUM_RES_PROPERTY], 1);
 	if (resno >= num_res)
-		return 0; /* or an errror */
+		return 0; /* or an error */
 
 	i = START_OF_ENTRIES + NEXT_ENTRY * resno;
 	switch (value) {
@@ -762,7 +762,7 @@ static void pseries_pci_fixup_iov_resources(struct pci_dev *pdev)
 
 	if (!pdev->is_physfn)
 		return;
-	/*Firmware must support open sriov otherwise dont configure*/
+	/*Firmware must support open sriov otherwise don't configure*/
 	indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL);
 	if (indexes)
 		of_pci_parse_iov_addrs(pdev, indexes);
diff --git a/arch/powerpc/platforms/pseries/vas-sysfs.c b/arch/powerpc/platforms/pseries/vas-sysfs.c
index 909535ca513a..59aef6062847 100644
--- a/arch/powerpc/platforms/pseries/vas-sysfs.c
+++ b/arch/powerpc/platforms/pseries/vas-sysfs.c
@@ -67,7 +67,7 @@ struct vas_sysfs_entry {
  * Create sysfs interface:
  * /sys/devices/vas/vas0/gzip/default_capabilities
  *	This directory contains the following VAS GZIP capabilities
- *	for the defaule credit type.
+ *	for the default credit type.
  * /sys/devices/vas/vas0/gzip/default_capabilities/nr_total_credits
  *	Total number of default credits assigned to the LPAR which
  *	can be changed with DLPAR operation.
diff --git a/arch/powerpc/platforms/pseries/vas.c b/arch/powerpc/platforms/pseries/vas.c
index 1f59d78c77a1..245e0a42981a 100644
--- a/arch/powerpc/platforms/pseries/vas.c
+++ b/arch/powerpc/platforms/pseries/vas.c
@@ -807,7 +807,7 @@ int vas_reconfig_capabilties(u8 type)
 	atomic_set(&caps->nr_total_credits, new_nr_creds);
 	/*
 	 * The total number of available credits may be decreased or
-	 * inceased with DLPAR operation. Means some windows have to be
+	 * increased with DLPAR operation. Means some windows have to be
 	 * closed / reopened. Hold the vas_pseries_mutex so that the
 	 * the user space can not open new windows.
 	 */