powerpc: drop MPC85xx_CDS platform support

The MPC8541/8548/8555 Configurable Development System (CDS) were the
vehicle used to provide evaluation of the 1st e500-v2 CPUs around 2007.

Similar to the earlier MPC83xx-MDS systems we removed, the "brains"
exist on a PCI-X card, but additional connectors exist to the right of
the PCI-X slot, two structural metal pins are used to provide stability
in a vertical ATX mounting, and the CPU is now on a daughter-card vs. a
clamped down BGA.

Given the extra complexity and risk of connector damage, the 8548CDS
I had access to came pre-assembled in a basic white Antec case common
for that era, and I'm inclined to assume that was the default.

Power was typical "Pentium4" 2005 ATX - the main 20 pin connector went
to the PCI ATX form factor backplane, and the 4 pin black/yellow went
to the CPU card.

Like previous evaluation boards, they attempted to provide break-out
connectors for as many features as possible, and that made for a fairly
complex looking system.

In any case, these are over 15 years old, and fairly complex systems,
originally made for a small group of industry related people, and made
for use where quiet fan operation wasn't important.  Given that, it
makes sense to remove support from them in 2023.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230620043300.197546-3-paul.gortmaker@windriver.com

5 files changed, 0 insertions, 1216 deletions

diff --git a/arch/powerpc/boot/dts/fsl/mpc8541cds.dts b/arch/powerpc/boot/dts/fsl/mpc8541cds.dts
deleted file mode 100644
index a2a6c5cf852e..000000000000
--- a/arch/powerpc/boot/dts/fsl/mpc8541cds.dts
+++ /dev/null
@@ -1,375 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * MPC8541 CDS Device Tree Source
- *
- * Copyright 2006, 2008 Freescale Semiconductor Inc.
- */
-
-/dts-v1/;
-
-/include/ "e500v1_power_isa.dtsi"
-
-/ {
-	model = "MPC8541CDS";
-	compatible = "MPC8541CDS", "MPC85xxCDS";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8541@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;	//  33 MHz, from uboot
-			bus-frequency = <0>;	// 166 MHz
-			clock-frequency = <0>;	// 825 MHz, from uboot
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;	// 128M at 0x0
-	};
-
-	soc8541@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x100000>;
-		bus-frequency = <0>;
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <8>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8541-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8541-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8541-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x40000>;	// L2, 256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8541-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8541-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8541-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8541-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x0>;
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x1>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>; 	// reg base, size
-			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;	// reg base, size
-			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x7e>;
-			fsl,descriptor-types-mask = <0x01010ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		cpm@919c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8541-cpm", "fsl,cpm2";
-			reg = <0x919c0 0x30>;
-			ranges;
-
-			muram@80000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x80000 0x10000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0x0 0x2000 0x9000 0x1000>;
-				};
-			};
-
-			brg@919f0 {
-				compatible = "fsl,mpc8541-brg",
-				             "fsl,cpm2-brg",
-				             "fsl,cpm-brg";
-				reg = <0x919f0 0x10 0x915f0 0x10>;
-			};
-
-			cpmpic: pic@90c00 {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <2>;
-				interrupts = <46 2>;
-				interrupt-parent = <&mpic>;
-				reg = <0x90c00 0x80>;
-				compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic";
-			};
-		};
-	};
-
-	pci0: pci@e0008000 {
-		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x10 */
-			0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
-
-			/* IDSEL 0x11 */
-			0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
-
-			/* IDSEL 0x12 (Slot 1) */
-			0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
-
-			/* IDSEL 0x13 (Slot 2) */
-			0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
-			0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
-			0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
-			0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
-
-			/* IDSEL 0x14 (Slot 3) */
-			0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
-			0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
-			0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
-			0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x15 (Slot 4) */
-			0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
-			0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
-			0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
-			0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* Bus 1 (Tundra Bridge) */
-			/* IDSEL 0x12 (ISA bridge) */
-			0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		bus-range = <0 0>;
-		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008000 0x1000>;
-		compatible = "fsl,mpc8540-pci";
-		device_type = "pci";
-
-		i8259@19000 {
-			interrupt-controller;
-			device_type = "interrupt-controller";
-			reg = <0x19000 0x0 0x0 0x0 0x1>;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			compatible = "chrp,iic";
-			interrupts = <1>;
-			interrupt-parent = <&pci0>;
-		};
-	};
-
-	pci1: pci@e0009000 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x15 */
-			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
-			0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
-			0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
-			0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
-		bus-range = <0 0>;
-		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0009000 0x1000>;
-		compatible = "fsl,mpc8540-pci";
-		device_type = "pci";
-	};
-};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8548cds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548cds.dtsi
deleted file mode 100644
index 3bc7d4711220..000000000000
--- a/arch/powerpc/boot/dts/fsl/mpc8548cds.dtsi
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- * MPC8548CDS Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&board_lbc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x01000000>;
-		bank-width = <2>;
-		device-width = <2>;
-
-		partition@0 {
-			reg = <0x0 0x0b00000>;
-			label = "ramdisk-nor";
-		};
-
-		partition@300000 {
-			reg = <0x0b00000 0x0400000>;
-			label = "kernel-nor";
-		};
-
-		partition@700000 {
-			reg = <0x0f00000 0x060000>;
-			label = "dtb-nor";
-		};
-
-		partition@760000 {
-			reg = <0x0f60000 0x020000>;
-			label = "env-nor";
-			read-only;
-		};
-
-		partition@780000 {
-			reg = <0x0f80000 0x080000>;
-			label = "u-boot-nor";
-			read-only;
-		};
-	};
-
-	board-control@1,0 {
-		compatible = "fsl,mpc8548cds-fpga";
-		reg = <0x1 0x0 0x1000>;
-	};
-};
-
-&board_soc {
-	i2c@3000 {
-		eeprom@50 {
-			compatible = "atmel,24c64";
-			reg = <0x50>;
-		};
-
-		eeprom@56 {
-			compatible = "atmel,24c64";
-			reg = <0x56>;
-		};
-
-		eeprom@57 {
-			compatible = "atmel,24c64";
-			reg = <0x57>;
-		};
-	};
-
-	i2c@3100 {
-		eeprom@50 {
-			compatible = "atmel,24c64";
-			reg = <0x50>;
-		};
-	};
-
-	enet0: ethernet@24000 {
-		tbi-handle = <&tbi0>;
-		phy-handle = <&phy0>;
-	};
-
-	mdio@24520 {
-		phy0: ethernet-phy@0 {
-			interrupts = <5 1 0 0>;
-			reg = <0x0>;
-		};
-		phy1: ethernet-phy@1 {
-			interrupts = <5 1 0 0>;
-			reg = <0x1>;
-		};
-		phy2: ethernet-phy@2 {
-			interrupts = <5 1 0 0>;
-			reg = <0x2>;
-		};
-		phy3: ethernet-phy@3 {
-			interrupts = <5 1 0 0>;
-			reg = <0x3>;
-		};
-		tbi0: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet1: ethernet@25000 {
-		tbi-handle = <&tbi1>;
-		phy-handle = <&phy1>;
-	};
-
-	mdio@25520 {
-		tbi1: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet2: ethernet@26000 {
-		tbi-handle = <&tbi2>;
-		phy-handle = <&phy2>;
-	};
-
-	mdio@26520 {
-		tbi2: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet3: ethernet@27000 {
-		tbi-handle = <&tbi3>;
-		phy-handle = <&phy3>;
-	};
-
-	mdio@27520 {
-		tbi3: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-};
-
-&board_pci0 {
-	interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-	interrupt-map = <
-		/* IDSEL 0x4 (PCIX Slot 2) */
-		0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-		0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-		0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-		0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-		/* IDSEL 0x5 (PCIX Slot 3) */
-		0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
-		0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
-		0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
-		0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
-
-		/* IDSEL 0x6 (PCIX Slot 4) */
-		0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
-		0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
-		0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
-		0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
-		/* IDSEL 0x8 (PCIX Slot 5) */
-		0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-		0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-		0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-		0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-		/* IDSEL 0xC (Tsi310 bridge) */
-		0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-		0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-		0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-		0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-		/* IDSEL 0x14 (Slot 2) */
-		0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-		0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-		0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-		0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-		/* IDSEL 0x15 (Slot 3) */
-		0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
-		0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
-		0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
-		0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
-
-		/* IDSEL 0x16 (Slot 4) */
-		0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
-		0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
-		0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
-		0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
-		/* IDSEL 0x18 (Slot 5) */
-		0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-		0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-		0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-		0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-		/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
-		0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-		0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-		0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-		0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
-
-	pci_bridge@1c {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x00 (PrPMC Site) */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-			/* IDSEL 0x04 (VIA chip) */
-			0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-			0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-			0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-			/* IDSEL 0x05 (8139) */
-			0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
-
-			/* IDSEL 0x06 (Slot 6) */
-			0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
-			0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
-			0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
-			0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
-			/* IDESL 0x07 (Slot 7) */
-			0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
-			0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
-			0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
-			0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
-
-		reg = <0xe000 0x0 0x0 0x0 0x0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		ranges = <0x2000000 0x0 0x80000000
-			  0x2000000 0x0 0x80000000
-			  0x0 0x20000000
-			  0x1000000 0x0 0x0
-			  0x1000000 0x0 0x0
-			  0x0 0x80000>;
-		clock-frequency = <33333333>;
-
-		isa@4 {
-			device_type = "isa";
-			#interrupt-cells = <2>;
-			#size-cells = <1>;
-			#address-cells = <2>;
-			reg = <0x2000 0x0 0x0 0x0 0x0>;
-			ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
-			interrupt-parent = <&i8259>;
-
-			i8259: interrupt-controller@20 {
-				interrupt-controller;
-				device_type = "interrupt-controller";
-				reg = <0x1 0x20 0x2
-				       0x1 0xa0 0x2
-				       0x1 0x4d0 0x2>;
-				#address-cells = <0>;
-				#interrupt-cells = <2>;
-				compatible = "chrp,iic";
-				interrupts = <0 1 0 0>;
-				interrupt-parent = <&mpic>;
-			};
-
-			rtc@70 {
-				compatible = "pnpPNP,b00";
-				reg = <0x1 0x70 0x2>;
-			};
-		};
-	};
-};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8548cds_32b.dts b/arch/powerpc/boot/dts/fsl/mpc8548cds_32b.dts
deleted file mode 100644
index f6ba4a982766..000000000000
--- a/arch/powerpc/boot/dts/fsl/mpc8548cds_32b.dts
+++ /dev/null
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * MPC8548 CDS Device Tree Source (32-bit address map)
- *
- * Copyright 2006, 2008, 2011-2012 Freescale Semiconductor Inc.
- */
-
-/include/ "mpc8548si-pre.dtsi"
-
-/ {
-	model = "MPC8548CDS";
-	compatible = "MPC8548CDS", "MPC85xxCDS";
-
-	memory {
-		device_type = "memory";
-		reg = <0 0 0x0 0x8000000>;	// 128M at 0x0
-	};
-
-	board_lbc: lbc: localbus@e0005000 {
-		reg = <0 0xe0005000 0 0x1000>;
-
-		ranges = <0x0 0x0 0x0 0xff000000 0x01000000
-			  0x1 0x0 0x0 0xf8004000 0x00001000>;
-
-	};
-
-	board_soc: soc: soc8548@e0000000 {
-		ranges = <0 0x0 0xe0000000 0x100000>;
-	};
-
-	board_pci0: pci0: pci@e0008000 {
-		reg = <0 0xe0008000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000
-			  0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>;
-		clock-frequency = <66666666>;
-	};
-
-	pci1: pci@e0009000 {
-		reg = <0 0xe0009000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000
-			  0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>;
-		clock-frequency = <66666666>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x15 */
-			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
-			0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-			0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
-	};
-
-	pci2: pcie@e000a000 {
-		reg = <0 0xe000a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	rio: rapidio@e00c0000 {
-		reg = <0x0 0xe00c0000 0x0 0x20000>;
-		port1 {
-			ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
-		};
-	};
-};
-
-/*
- * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings
- * for interrupt-map & interrupt-map-mask.
- */
-
-/include/ "mpc8548si-post.dtsi"
-/include/ "mpc8548cds.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/mpc8548cds_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8548cds_36b.dts
deleted file mode 100644
index 32e9076375ae..000000000000
--- a/arch/powerpc/boot/dts/fsl/mpc8548cds_36b.dts
+++ /dev/null
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * MPC8548 CDS Device Tree Source (36-bit address map)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- */
-
-/include/ "mpc8548si-pre.dtsi"
-
-/ {
-	model = "MPC8548CDS";
-	compatible = "MPC8548CDS", "MPC85xxCDS";
-
-	memory {
-		device_type = "memory";
-		reg = <0 0 0x0 0x8000000>;	// 128M at 0x0
-	};
-
-	board_lbc: lbc: localbus@fe0005000 {
-		reg = <0xf 0xe0005000 0 0x1000>;
-
-		ranges = <0x0 0x0 0xf 0xff000000 0x01000000
-			  0x1 0x0 0xf 0xf8004000 0x00001000>;
-
-	};
-
-	board_soc: soc: soc8548@fe0000000 {
-		ranges = <0 0xf 0xe0000000 0x100000>;
-	};
-
-	board_pci0: pci0: pci@fe0008000 {
-		reg = <0xf 0xe0008000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x10000000
-			  0x1000000 0x0 0x00000000 0xf 0xe2000000 0x0 0x800000>;
-		clock-frequency = <66666666>;
-	};
-
-	pci1: pci@fe0009000 {
-		reg = <0xf 0xe0009000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
-			  0x1000000 0x0 0x00000000 0xf 0xe2800000 0x0 0x800000>;
-		clock-frequency = <66666666>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x15 */
-			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
-			0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-			0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
-	};
-
-	pci2: pcie@fe000a000 {
-		reg = <0xf 0xe000a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xe3000000 0x0 0x100000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	rio: rapidio@fe00c0000 {
-		reg = <0xf 0xe00c0000 0x0 0x20000>;
-		port1 {
-			ranges = <0x0 0x0 0xc 0x40000000 0x0 0x20000000>;
-		};
-	};
-};
-
-/*
- * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings
- * for interrupt-map & interrupt-map-mask.
- */
-
-/include/ "mpc8548si-post.dtsi"
-/include/ "mpc8548cds.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/mpc8555cds.dts b/arch/powerpc/boot/dts/fsl/mpc8555cds.dts
deleted file mode 100644
index 901b6ff06dfb..000000000000
--- a/arch/powerpc/boot/dts/fsl/mpc8555cds.dts
+++ /dev/null
@@ -1,375 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * MPC8555 CDS Device Tree Source
- *
- * Copyright 2006, 2008 Freescale Semiconductor Inc.
- */
-
-/dts-v1/;
-
-/include/ "e500v1_power_isa.dtsi"
-
-/ {
-	model = "MPC8555CDS";
-	compatible = "MPC8555CDS", "MPC85xxCDS";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8555@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;	//  33 MHz, from uboot
-			bus-frequency = <0>;	// 166 MHz
-			clock-frequency = <0>;	// 825 MHz, from uboot
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;	// 128M at 0x0
-	};
-
-	soc8555@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x100000>;
-		bus-frequency = <0>;
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <8>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8555-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8555-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8555-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x40000>;	// L2, 256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8555-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8555-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8555-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8555-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x0>;
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x1>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>; 	// reg base, size
-			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;	// reg base, size
-			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x7e>;
-			fsl,descriptor-types-mask = <0x01010ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		cpm@919c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8555-cpm", "fsl,cpm2";
-			reg = <0x919c0 0x30>;
-			ranges;
-
-			muram@80000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x80000 0x10000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0x0 0x2000 0x9000 0x1000>;
-				};
-			};
-
-			brg@919f0 {
-				compatible = "fsl,mpc8555-brg",
-				             "fsl,cpm2-brg",
-				             "fsl,cpm-brg";
-				reg = <0x919f0 0x10 0x915f0 0x10>;
-			};
-
-			cpmpic: pic@90c00 {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <2>;
-				interrupts = <46 2>;
-				interrupt-parent = <&mpic>;
-				reg = <0x90c00 0x80>;
-				compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
-			};
-		};
-	};
-
-	pci0: pci@e0008000 {
-		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x10 */
-			0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
-
-			/* IDSEL 0x11 */
-			0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
-
-			/* IDSEL 0x12 (Slot 1) */
-			0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
-
-			/* IDSEL 0x13 (Slot 2) */
-			0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
-			0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
-			0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
-			0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
-
-			/* IDSEL 0x14 (Slot 3) */
-			0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
-			0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
-			0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
-			0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x15 (Slot 4) */
-			0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
-			0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
-			0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
-			0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* Bus 1 (Tundra Bridge) */
-			/* IDSEL 0x12 (ISA bridge) */
-			0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		bus-range = <0 0>;
-		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008000 0x1000>;
-		compatible = "fsl,mpc8540-pci";
-		device_type = "pci";
-
-		i8259@19000 {
-			interrupt-controller;
-			device_type = "interrupt-controller";
-			reg = <0x19000 0x0 0x0 0x0 0x1>;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			compatible = "chrp,iic";
-			interrupts = <1>;
-			interrupt-parent = <&pci0>;
-		};
-	};
-
-	pci1: pci@e0009000 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x15 */
-			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
-			0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
-			0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
-			0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
-		bus-range = <0 0>;
-		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0009000 0x1000>;
-		compatible = "fsl,mpc8540-pci";
-		device_type = "pci";
-	};
-};