MIPS: Remove NETLOGIC support

No (active) developer owns this hardware, so let's remove Linux support.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

1 files changed, 0 insertions, 141 deletions

diff --git a/arch/mips/netlogic/common/smpboot.S b/arch/mips/netlogic/common/smpboot.S
deleted file mode 100644
index 509c1a7e7c05..000000000000
--- a/arch/mips/netlogic/common/smpboot.S
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-
-#include <asm/asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/regdef.h>
-#include <asm/mipsregs.h>
-#include <asm/stackframe.h>
-#include <asm/asmmacro.h>
-#include <asm/addrspace.h>
-
-#include <asm/netlogic/common.h>
-
-#include <asm/netlogic/xlp-hal/iomap.h>
-#include <asm/netlogic/xlp-hal/xlp.h>
-#include <asm/netlogic/xlp-hal/sys.h>
-#include <asm/netlogic/xlp-hal/cpucontrol.h>
-
-	.set	noreorder
-	.set	noat
-	.set	arch=xlr		/* for mfcr/mtcr, XLR is sufficient */
-
-/* Called by the boot cpu to wake up its sibling threads */
-NESTED(xlp_boot_core0_siblings, PT_SIZE, sp)
-	/* CPU register contents lost when enabling threads, save them first */
-	SAVE_ALL
-	sync
-	/* find the location to which nlm_boot_siblings was relocated */
-	li	t0, CKSEG1ADDR(RESET_VEC_PHYS)
-	PTR_LA	t1, nlm_reset_entry
-	PTR_LA	t2, nlm_boot_siblings
-	dsubu	t2, t1
-	daddu	t2, t0
-	/* call it */
-	jalr	t2
-	nop
-	RESTORE_ALL
-	jr	ra
-	nop
-END(xlp_boot_core0_siblings)
-
-NESTED(nlm_boot_secondary_cpus, 16, sp)
-	/* Initialize CP0 Status */
-	move	t1, zero
-#ifdef CONFIG_64BIT
-	ori	t1, ST0_KX
-#endif
-	mtc0	t1, CP0_STATUS
-	PTR_LA	t1, nlm_next_sp
-	PTR_L	sp, 0(t1)
-	PTR_LA	t1, nlm_next_gp
-	PTR_L	gp, 0(t1)
-
-	/* a0 has the processor id */
-	mfc0	a0, CP0_EBASE
-	andi	a0, 0x3ff		/* a0 <- node/core */
-	PTR_LA	t0, nlm_early_init_secondary
-	jalr	t0
-	nop
-
-	PTR_LA	t0, smp_bootstrap
-	jr	t0
-	nop
-END(nlm_boot_secondary_cpus)
-
-/*
- * In case of RMIboot bootloader which is used on XLR boards, the CPUs
- * be already woken up and waiting in bootloader code.
- * This will get them out of the bootloader code and into linux. Needed
- * because the bootloader area will be taken and initialized by linux.
- */
-NESTED(nlm_rmiboot_preboot, 16, sp)
-	mfc0	t0, $15, 1	/* read ebase */
-	andi	t0, 0x1f	/* t0 has the processor_id() */
-	andi	t2, t0, 0x3	/* thread num */
-	sll	t0, 2		/* offset in cpu array */
-
-	li	t3, CKSEG1ADDR(RESET_DATA_PHYS)
-	ADDIU	t1, t3, BOOT_CPU_READY
-	ADDU	t1, t0
-	li	t3, 1
-	sw	t3, 0(t1)
-
-	bnez	t2, 1f		/* skip thread programming */
-	nop			/* for thread id != 0 */
-
-	/*
-	 * XLR MMU setup only for first thread in core
-	 */
-	li	t0, 0x400
-	mfcr	t1, t0
-	li	t2, 6		/* XLR thread mode mask */
-	nor	t3, t2, zero
-	and	t2, t1, t2	/* t2 - current thread mode */
-	li	v0, CKSEG1ADDR(RESET_DATA_PHYS)
-	lw	v1, BOOT_THREAD_MODE(v0) /* v1 - new thread mode */
-	sll	v1, 1
-	beq	v1, t2, 1f	/* same as request value */
-	nop			/* nothing to do */
-
-	and	t2, t1, t3	/* mask out old thread mode */
-	or	t1, t2, v1	/* put in new value */
-	mtcr	t1, t0		/* update core control */
-
-	/* wait for NMI to hit */
-1:	wait
-	b	1b
-	nop
-END(nlm_rmiboot_preboot)